Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
HCT12

LiftMaster HCT Rail Only 12'

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
  • Will open a standard sectional door 11'6" high
HCT14

LiftMaster HCT Rail Only 14'

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
  • Will open a standard sectional door 13'6" high
HCT16

LiftMaster HCT Rail Only 16'

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
  • Will open a standard sectional door 15'6" high
HCTDCUL

LiftMaster Commercial High Traffic O/H Op. HCT Head Only 0.5 HP 120/230V 1PH BBU w/Eyes

  • Selectable Speed control opens up to 11" per second 25% faster than industry average to keep traffic flowing.
  • Low-Profile Design installs easily in tight applications at only 8" in height.
  • myQ® Technology enables you to securely control and monitor your gate operator from anywhere. (Cellular data or Wi-Fi® connection required).
  • Included: CPSUN4G Monitored Commercial Protector System® increases entrapment protection with through-beam infrared sensors with heavy-duty housings and brackets; NEMA 4 Rated; Maximum Range: 45 ft.
  • Security+ 2.0® On-Board Radio Receiver: Tri-Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
HCTDCUL Installation ManualHCTDCUL Manuel InstallationSell sheetBrochure
HD-15

Reflector Hood for 3" Round Reflector

  • Black/Charcoal
HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

  • Measures 7" from end to end
  • Measures 5.5" from eyelet to eyelet
HD3080

Step Lift Plate Curled

  • Step Plate/Lift Handle
HD3115

Commercial Slide Lock for 3" track Long Throw 4" travel

  • Offset from inside face of door to lockbar: 1/2"
  • Bright zinc plated steel with spring actuated lock bar.
  • 4" of travel.
HD3117

Heavy Duty Slide Lock 2.85" Throw Zinc Plated

  • Mounting holes: 0.275"
HD3120

Commercial Inside Slide Lock for 2" or 3" track

  • Track use: 2" or 3"
  • Throw: 2-11/16"
  • Offset from inside face of door to lockbar: 1/2"
  • Bright zinc plated steel with spring actuated lock bar.
  • Same as part number 270
HD3120-BLACK

Commercial 3" Inside Slide Lock Black Powder Coated

  • Track use: 2" or 3"
  • Throw: 2.62"
  • Slide bar: 0.138"
  • Individually wrapped
HD3130

End Stile Latch 7-1/2" Lockbar Length

  • Lockbar Length: 7-1/2"
  • Throw: 2-1/8" Use with: Lockbar or End Stile
  • Centerline Distance (key spindle to handle shaft): 2-3/4".
  • Handle in Bright Chrome Finish Latch in Bright Zinc Plated steel.
HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

  • Complete cable locking system for 1-3/8" door.
  • System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.
HD8460-200

T-Handle Cable Lock System 2"

  • Complete cable locking system for a 2" door.
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
HD8460-KYD-ALIKE

T-Handle Cable Lock System 1-3/8"- 2" ** Keyed Alike **

  • Complete cable locking system for a 1-3/8" or 2" door Keyed alike
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
  • T handle KA5 = keyed alike increment of 100 (5 different combination box (20 of each #)
HD8460-REPL-KEY

Replacement Keys for HD8460 Random Code 00-99 Sold per Pack of 100

  • 100 key pack numbered 00 thru 99
HDC-123-208-C-LH

Lynx Ind. Jackshaft with Hoist 1 Hp 208V 3ph Contactor Left Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
HDC-123-208-C-R

Lynx Ind. Jackshaft with Hoist 1 Hp 208V 3ph Contactor Right Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
HDC-123-RH-CONT

Lynx Ind. Jackshaft with Hoist 1 Hp 220V 3ph Contactor Right Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
Sell Sheet