Devanco Canada - Get The Right Garage Door Opener‎ and Parts

GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

Auto voltage sensing - no jumpers to set
Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 128 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

Activates one Delta-3 receiver for remote stop or reverse safety edge
No cables or coiled wires
Mounting screws (4) supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
The 300 MHz frequency is compatible with standard Multi-Code transmitters
The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
Operates on 12-24 volts AC or DC power
Two channels
Whip antenna

.......more details

Programming Instructions

MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

The MGT is the industry’s only fully supervised gate safety edge transmitter.
It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
Features Include:
Signals access controller for stop or reverse when safety edge activates
No cables or coiled wires

.......more details

Programming Instructions

MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
Features Include:
Internal antenna
1-6 digit PIN for each user

.......more details

Installation Manual

K75-18364

LiftMaster Arm Assembly Kit for SW470

Complete arm kit for SW470 gate operator

12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

Actual length: 179" (14' 11")

41A7619-4

LiftMaster Cover for 8557

PRO-TB-5011-R

Micanan 1/2HP 115V 1P Trolley Operator with Brake - Contactor

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models

306839

Bircher Hercules 2s Microwave Motion Sensor for Industrial Doors

Two completely independent programmable outputs for endless application scenarios
Highly flexible program settings utilizing both outputs are now easier to program
23' (7 m) long cable for maximum installation flexibility
6-wire cable using traditional wire colors & thicker wire gauge for easier installation
Pulse on exit feature
Differentiation between pedestrian and vehicle traffic

.......more details

Installation Manual Sell Sheet Field Size

RS1029

Roller 2" Steel 9" stem- WL 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 9.5" Overall Length: 10.5"
Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)

029C98090

T-Style Complete Replacement Door White Stainless Steel Pkg 029C98090

Manufactured to exact size fully assembled tracking and spring assembly included.
Price varies according to size

195LM

LiftMaster Ceiling Mount ***Discontinued***

Designed to fit most standard garages
Black powder-coated finish hides wires and cords for a cleaner look
Mounts parallel or perpendicular to rail
Adjustable height to fit most ceilings
Hangs 6.5 to 24 inches down from ceiling

Installation Manual Manuel d'Installation Sell Sheet Brochure

41A7635

LiftMaster Transformer 100V

For model: 8550

41B7611

LiftMaster Filter Board w/Screws **to extent of inventory

For model: 8550

41A7114-7

LiftMaster Travel Module (41D8071-4)

For model: 8550W & 8160
Same as 41D8071-4

Installation Manual Manuel d'Installation

RESET003

Manaras Resettable Overload Fuse 6A 1 Phase

MU00001

Micanan Swivel Pulley

For models PRO-H / HB

MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

Pro-H requires 3 of these bearings

41C0279

LiftMaster Light Socket for Sec+ 2.0

New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
Compatible with LiftMaster garage door openers manufactured from 1993 to present.
New "insulated" design eliminates interference from CFL bulbs therefore better remote control range

MS00003

Micanan Carriage for PRO-APT / T

For model PRO-APT / T

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts

CABLE_316SS-500

Cable 3/16" 7x19 500' Stainless Steel

Comparison charts

CABLE_1/8SS-500

Cable 1/8" 7x19 500' Stainless Steel

82-PX10-28

LiftMaster Screw 10-32x28

TUBE_SHAFT_8FT

Hollow Shaft 1" x 8'-10" Galvanized 16 gauge

34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

Deluxe Wall Console for Genie Intellicode Series II only
3 function console: operates door opener controls lights and security lock out switch
Compatible with Code Dodger
Same as previous part number: GPWC-2WLB

883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

Controls garage door operation and opener lights
Easy and fast programming
Compatible with Security+ 2.0 and MyQ remotes and accessories

Installation Manual Manuel d'Installation

50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

Nema 4
3-wire air switch; 1-NO and 1-NC contact
Mosley
NO contact on Yellow and Green

C-200-INSTALLED

Cones 2" Factory Installed (Pair)

For do-it-yourself installation use part no. SF200

.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-2-L

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

10FT-I-BEAM

LiftMaster 10' chain drive rail 3710CH / CD1010

I-Beam chain rail for 3595 & ATS
Space required: 2" above heighest point of travel of the door

41A7562

LiftMaster Light Lens for 8360 8550 8355

Replacement light lens

309013

Linear 1-Channel Multi-Code Receiver 310 MHz

Three tabs for universal mounting
One N/O relay
Compatible with 310 MHz Stanley and Multi-Code transmitters only.
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

Swivel end
Nema 1
Same as Pull Cord

PS31L-NS11R1M00

Carlo Gavazzi Utility Switch

Switch DPST-NO/NC Chassis Mount
Actuator Type: Side Rotary Adjustable Roller
Termination Style: Screw Terminal
Ingress Protection: IP66 - Dust Tight Water Resistant
Switch Function: On-Mom Off-Mom
Current Rating (Amps): 5.5A (AC) 2.8A (DC)

.......more details

Installation Manual

PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

Reflector (ER4) not included

Installation Manual

.283-134-L

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-134-R

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.243-134-L

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-134-R

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.218-134-R

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.207-134-R

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

892LT

LiftMaster 2-btn Sec+ 2.0 Learning Transmitter

Programming Instructions Instructions de programmation Sell Sheet

MOUNTSHAFT018

Manaras Limit Shaft Kit Opera

Drawing

86LMC

LiftMaster Antenna Extension Kit

For use with 312HMC 412HMC 422LMC and 423LMC
Kit contains 15ft of cable

CABLE_1/8-SS

Cable 1/8" 7x19 1000' Stainless Steel ** Price on request

108135.0004

Overhead Serpentine V- Belt for JST 31"

Overhead Door commercial garage door opener serpentine belt 108135-0004
Type "J" 31"

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

120/208/240/480V PRIMARY 24V SECONDARY

C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

For do-it-yourself installation use part no. SF258

NX21

Allen Bradley 24V Reversing Contactor

Allen Bradley no. 104-C16KJH22-X6
Cat no. 100-C16*10

10FT-RAIL-CHAIN

LiftMaster 10' chain drive rail 1710LMC - colour code: Red

#48 chain size
Price reflects cost if purchased with an opener

20-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Red

2 strand 22 gauge tin-dipped copper hook-up wire
Color coded White & White/Red wires

7001-12-W/B

Commercial Side & Top Weather-Strip 12' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

TC2

Tri-Code Transmitter 2-btn Visor - DISCONTINUED

Tri-Code series 2 channel transmitter model TC-2
300 & 310 MHz simultaneously
Each channel can be set on a seperate code format
Works with both 8 and 10 dip switch systems
Replacement: 380UT

CR2450

Maxcell 3V Lithium Button Cell

CR2016

Maxcell 3V Lithium Button Cell

ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details