Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
41A6569

LiftMaster Safety Sensor Mounting Kit

  • Replacement brackets only for 41A4373A safety eyes
MG00030

Micanan Limit Cam 1/2-20 UNF

  • Sold seperately. 2 required per operator
CS303-DB100

EMX Car Sense Direct Burial Sensor with 100 ft Lead Wire *** Replaced by LRS-DB-100

  • Can be used for above ground applications ie.. strapped to a post or wall
  • Easy low cost installation
  • Small size of the detector allow for easy installation in pavement
  • Rugged sensor is also suitable for above grade installations
  • Includes direct burial sensor and 100 ft of lead wire
  • Advanced 3-axis technology for better detection
    • .......more details
WASHER008

Manaras Type A Plain Washer 5/16" Zinc Plated

  • Used on old MJH
NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

  • Used on old MJH
3950-41DS

LiftMaster Dead-Shaft Sprocket Kit for 3950

  • Used on doors without live shafts
  • Same as 41A7280
  • Includes #41 chain sprocket
Sell sheet
ALUM-801

Aluminum 24" x 100' Spool White / Blanc # 801

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Aluminum on the reverse side
  • Gentek # 801
Colour chart
XT2563-00-W

Xcluder Rodent Block 3" Black 75' Reel

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
C16-32FHD

Bearing 1" x 2" Press Fit Heavy-Duty

  • Flanged ball solid steel bearing
  • Rating: 1 000 000 revolutions
  • Axial load: 150lb max
  • Radial load: 900lb max
CSL24UL

LiftMaster New 24VDC Commercial High Traffic DC Slide Gate Operator

  • Battery Backup: 208 cycles or up to 24 days of standby power when the power is down
  • Security+2.0®: Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used
  • MyQ®: Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app
  • Soft start / stop extends operator and hardware life in high-cycle and heavy-gate applications
  • Wireless dual-gate communication eliminates expensive conduit costs and unsightly driveway scars
  • Keyed manual disconnect when unlocked allows gate to be operated manually.
    • .......more details
Installation manualManuel d'installationSell sheet
ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
CS303-C-1

EMX Car Sense Vehicle Detector Control Unit *** Replaced by LRS-C1

  • The CarSenseâ„¢ 303 features advanced 3-axis magnetoresistive sensing technology.
  • The sensor measures Earth’s magnetic field and responds to disturbances caused by ferrous objects.
  • The CS303 combines this exciting new technology with a fieldproven hardware platform to produce a high-sensitivity compact and cost-effective solution for reliable vehicle detection.
  • Three sensing elements provide magnetic field measurement in the X Y and Z axes improving detection sensitivity.
MM-00057

Micanan Wall Mounting Bracket (GH reducer 50/70)

BK020/PR

Commercial 2" Safety Bottom Bracket Sold as a Pair (L & R) *** No Longer Available

  • Maximum cable diameter: 3/16"
  • Maximum door weight: 1300 lbs Zinc
  • Plated Steel
  • Sold as a pair
MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

Sell Sheet
Z9207

Sensor Guards Sold as a Pair

  • Made to fit over garage door sensors
  • Will fit over most popular sensor brands
  • Protects sensors from coming out of alignment
  • Helps protect against water corrosion
  • Easily installs to the door track or the the wood door frame
  • Sold by the pair
    • .......more details
Q400E-HCT

LiftMaster Control Board HCT

  • Replaced Q400D-HCT
22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

  • Three button wall station Open/Close/Stop
  • NO contacts on the Open and Close buttons
  • NC contact on the Stop button
  • Stainless steel surface plate
  • Flush mount
Q248

LiftMaster Gear Reducer 40:1 HCT Post 2/99 (K32-50251)

  • Same as K32-50251
MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
PPLX

LiftMaster Stand Alone Proximity Reader ** NLA

  • 6" read range
  • 50000 user capacity
  • Multiple Wiegand protocol (Sentex® 26-bit industry standard PassportTM)
  • Programmable as stand-alone or Wiegand pass-through
  • Simple-to-use handheld radio programmer (model PPRP; sold separately)
  • Programmable output relay (NO/NC)
    • .......more details
Programming instructionsSell sheet
BRAKEPART016

Manaras Brake Pad Assembly MLT MLJ MLH

  • Includes: 1 x BUSHING026 1 X CLUTCHPLATE008 1 X PLATE041
7272105

FAAC 400 Cover

19-48047MN

LiftMaster Roller Chain #48 x 47 Nickel Plated

  • #48 x 47 pitch with master link
MGS20-B-2U-05

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 5ft Long

  • €¢Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
MH00008

Micanan Collar 3/4" ID

  • 2 required per door
OSH-6213-ECB-LH

Manaras Opera-SH 3/4 HP 240V 1Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation manualSell sheet
T-931-H

FL-Heddolf 1-btn Transmitter P220-1K-311 MHz **this model is discontinued

  • Open/Close remote for 1 door
  • Dip switch led 9V battery and metal clip
  • Compatible with Allstar 1 button T-931 and T-931-M
  • New style transmitter case
HTUS

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Single Slot

  • Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Adjustable from 2"-3-1/2"
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
  • 5-1/8" hole center to hole center distance
  • 3500 lbs load rating
50ACTWF

LiftMaster Receiver Logic Board AC WiFi*** Discontinued and replaced by the 050ACTBMC

  • This is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi with MyQ® technology.
  • For use with various LiftMaster® and Chamberlain® AC Chain or Belt Drive Garage Door Openers; manufactured after 2011.
  • The unit will feature a yellow learn button
  • Also known as: 1D8088-1 045ACTWF 1D8808-3 041D8088 50ACCL5
  • Same as 050ACTWF
  • 1 Year Warranty
    • .......more details
36764A

Genie Chain and Belt Pulley (#39591A)

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Both for Chain and Belt Openers
  • Front Idler Pulley for Genie 4024
  • New part number #39591A
MD-00035

Micanan Offset Link #410

ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

ST-GLUE

Soft Touch Glue

  • For use with Soft Touch Profile
  • 1 oz
601332.0001

Overhead Sprocket 14T 1/4P x 3/8D

  • Fits Overhead JST drawbar model
  • Sprocket attaches to the limit shaft
90_9210MO

LiftMaster Auxiliary Limit Switch Mod M62 Open Factory Installed

  • Provides a limit switch for use by others to control auxiliary devices such as lights heaters dock levelers or other equipment.
  • The switch can be used to turn on or off such equipment when the door is fully opened or fully closed.
  • When ordering specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure.
  • A maximum of 2 switches per operator can be supplied.
  • Each switch is SPDT (form C) and is rated 10 amps at 125/250 VAC
  • Wire leads are provided on field install kits
    • .......more details
.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1-1/4" solid shaft
  • 3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.
    • .......more details
ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
29202

Doorlec Transformer 550Vpr 120V sec. 35VA

ME111-L

Miller Edge Black Left Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
R5206

Saddle Support for 5" Pulley

  • 11 gauge galvanized steel
CP-LX720

Lynx 3-btn O/C/S Transmitter 372 MHz for Commercial Op. with UL325 Board

  • UL325
  • Works on the new Lynx commercial operators
  • Open Close Stop transmitter
  • Not compatible with the 372MHz residential operators.
Programming instructionsCompatibility chart
CP-LX740

Lynx 3-btn Transmitter 372 MHz for Commercial Op. with UL325 Board

  • UL325
  • Works on the new Lynx commercial operators
  • For 3 doors
  • Not compatible with the new 372HMz residential operators
Programming instructionsCompatibility chart
25-01434

Truck Door Stainless Cables 110" 1/4 nylon eye 7x19 Pair for Roll-Up Doors

  • Works with both Whiting and Todco doors
  • Nylon eye ends are used 1/4" and 7/16" eye cables
  • Cross Ref: W4020-1
60-2728

AB 42GRU-9001 Retro-Reflective Photocell Exterior

  • Voltage: 12VDC/24VAC/DC
  • Sensing Distance: 30 Feet
  • Comes with Bracket and Reflector
  • NEMA 3 4 4X 6P 12 & 13
  • Allen Bradley
1005-1-1/2-10'

Aluminum Bottom Retainer U-Shaped 10' Long

  • For door thickness 1-1/2"
510.3228.07

Whiting Double End Hinges DF Mild/Nylon - 7 Panel Door Add-On Option

  • dd-on option when ordering door.
DC2000SL

LiftMaster Power Backup *** Discontinued

  • Keeps traffic moving during a power outage
  • Opens the gate when power goes out to allow vehicles to enter or exit
  • When power is restored the gate will return to normal operation
  • Compatible with operators: SL3000UL
MALED17

LiftMaster LED Barrier Arm 17 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
  • Counterweight required part # MALEDCW
.250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Green

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MV00021

Swivel Type Pull Cord - SPST Nema 4

Data sheet
H105L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Left Hand W/Brake

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
H101L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Right Hand W/Brake ***No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

PRO-APT-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
T116

Manaras Trolley Track 16ft for 3/4HP & All APT models up-charge *Actual length 222"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
GD-LITE-1224134

Lynx Thermo Window 12" x 24" x 1-3/4" White

33106

Overload 5.50 to 8.50A

RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

  • The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
  • Advanced warning of the door closing helps prevent traffic collisions with the door
  • Controls both 24V & 110V traffic lights
Installation Manual
41B591

LiftMaster Replacement Battery Kit for 475LMC 2/pk

  • For 475LM Battery Back Up Units only
  • Used only on the following LiftMaster models: 2500 3500 3800 & 8500
BG790-50-11

LiftMaster Industrial-Duty Wishbone Barrier Gate Operator 1/2 HP 115V Arm & Weight Included ***Must include Counter Weight G658056 and Arm G651208R***

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • Includes a 24' arm
Installation ManualSell Sheet
7001-WG-10-DO

Residential Wood Grain Side & Top W/S Dark Oak 10' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
2'6X6SC50

Devanco Loop 2'6" x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
97799

Marantec Shark Tooth Position Reference Tab Belt Rail (96834)

  • Same as part number 96834
  • For belt rail
Replacement Instructions
111420.001.S

Overhead Cut-Off Switch for RSX Operator

  • Interlock switch for Overhead model RSX
Replacement Instructions
6X20SC50

Devanco Loop 6' x 20' Saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
TC134-10

Top Cap 1-3/4" 10 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
UCP207-20

Precision Pillow Block Bearing 1-1/4" Bore

  • 6-9/16" overall length
  • 5" hole center to center distance
CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
.295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
S2TR2641E1

Erone 1-Channel Mini Transmitter 433MHz

  • Open/Close remote for 1 door
  • Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
  • Learn button programming
  • Ergonomic stylish design Rugged & durable
  • Light grey base with yellow buttons
  • unobstructed range: 820 ft (250m)
    • .......more details
Sell SheetBrochureWireless System Chart
24-MAG-STRAP

Magnetic Hinge Strap 24" Black Set of 4

  • Decorative hinge strap only.
  • Black flexible magnetic material with deep embossed design
029-98090

T-Style UDI Replacement Door White Stainless Steel Pkg 029-98090

  • For openings within 98" w x 90" h
  • Hardware attached balancer assembly not included
  • Manufactured to exact size
T112

Manaras Trolley Track 12ft for 3/4HP & All APT models *Actual length 174"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
25-2015

LiftMaster 15 Amp Overload Fuse

  • For models: SL585-100-11 SL595-100-11 SL575-100-11
25-4003-K

LiftMaster 2.6-3.7 Amp Overload Fuse

  • For models: SL595-200-53
25-2008

LiftMaster 8 Amp Overload Fuse

  • For models: SL585-100-21 SL858-100-81 SL595-100-21 SL595-100-81 SL575-100-21 SL575-100-81
84284

Marantec Logic Board for Non-EOS Models

  • For use on M Line- M-4500 and M-4700 models.
  • For use on Q Line - 7500 and 7700 models.
  • For use on Martin DC 3500E and DC 3700E models.
  • Replaces 8054216. Special programming needed. Instructions included
39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

22-460

Brake Solenoid 440-460V

  • Used on all brands of commercial door and gate operators
  • same as MK-00028
26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Co-extruded using rigid PVC backing with flexible PVC seal.
  • To be used with the offset U-channel retainer only (26-40037 or 26-40039)
4-11-7R

Roller 3" 10-Ball 7" Stem Nylon

  • Sealed bearing for long life in dusty conditions
  • 7" stem (working length = 6 1/8")
RELAY024

Manaras Relay DPDT 24VAC

  • Used in all heavy-duty operators as well as MLT and Opera-MH/MJ
MK00701

Micanan Smart 10.0 Full Feature Circuit Board Monitored with Heavy Duty Relays

  • For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
  • The board has P1 & P2 terminals
Instructions Manual
MK00488-NM

Micanan Electronic Circuit Board Non-Monitored

  • Replacement board for PRO-LH (50-11)
  • Board does NOT have terminals P1 & P2
  • Up to 20 transmitters can be programmed
Instructions Manual
VBELT_4L370

Manaras VBelt 4L 37"

  • Used on MJH models from 1980 - 2000
K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

MA001

LiftMaster MA & MAT Control Board (K79-60166)

  • Electronic board for barrier gate operator
  • Same as K79-60166
  • Can be used in various Autogate Operators
50346

Doorlec Electric Switch and housing for Mechanical Edge

MK00737

Micanan Feature Circuit Board with Contactor Interface Non-Monitored 575V **use MK00642-NM

  • For all HP - 575V all voltages 1.5 2 3 & 5HP
  • Non-Monitored
Instructions Manual
10-1000-BAR

Strip Curtain Universal Mounting Bar Pre-Studded Angle Sold per foot

  • Includes: 1 cinch plate and 2 wing nuts which covers 6 of the pre-studded bolts at one time making installation and maintenance easy.
97-75005

DOT-C2 Reflective Tape 150 ft x 2" W All White

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
IS40P

BEA Presence Sensor

  • Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
  • Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
  • Equipped with 9 pre-programmed pattern configurations for various industrial applications.
  • Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
  • Mounting height: 8-16'
  • Detection field: 10'x10' at max. mounting height of 16'
    • .......more details
Installation manualSell sheetCut sheet
MK-00004

Micanan Travel Limit Switch

18FT-TROLLEY-SET

LiftMaster 18ft Double Angle Rail Set for Comm. Trolley Ops (2 pcs) *Actual length 251"*

  • Double Angle Rails for doors up to 18' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us