Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
C-24X10-134-W

Thermal Window 24" x 10" for 1-3/4" Door White

  • For 1-3/4" thick door
422LMC

LiftMaster 2-Channel Co-Axial Receiver 390 MHz ***DISCONTINUED

  • Smart Garage Door Opener® electronics on each channel for fast programming
  • Bell wire attached for easy second channel hook-up
  • 18 - 35VAC/DC
  • FCC certified 390MHz
7001-16-ANODIZED

Commercial Side & Top Weather-Strip 16' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
19-4071

LiftMaster Chain #40x71 No Master Link

  • #40 x 71 pitch no master link
  • Same as G194071
  • Compatible with LiftMaster Model SL595GL Slide Gate Operators.
K1A6408

LiftMaster APE Kit 24V

  • For use with various LiftMaster® Swing Gate and Slide Gate Operators
HSLG-121

Linear Commercial Slide Gate Operator 1 HP 230V 1 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
Z9966

Deuer Cable Puller

  • Light duty wire and cable gripping tool
  • For wire 1/16" - 1/4" diameter
  • Recommened for residential use only
  • 1300 lbs. capacity
F520-3.15A

Fuse 5 x 20mm 3.15A 250V Fast Acting 5/Pkg

  • 5 x 20mm miniature fast acting glass fuse
  • Rated voltage: 125V/250V
  • Rated current:3.15A
  • ROHS compliant
  • 5 per package ( Clamshell)
K71-D3PH

LiftMaster Drum Brake Kit 3 Ph 208/230/460V (Late Model Logic 5 Shoe and Drum Models)

  • Internal Solenoid Drum Brake with Cable Replacement Kit.
  • Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
  • Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
  • Quiet preferred sound profile
  • Industry benchmark stopping performance with adjustability
  • Significantly reduced modes of failure
    • .......more details
Installation manualManuel d'installation
MK-00644

Micanan Plug-In Harness for Limit Switch Circuit Board 6-Wire

  • Limit Harness for MK00641 MK00488 MK00642 circuit boards
SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
K29-FDCL-500CCB

LiftMaster FDCL Receiver Logic Board with Battery Rev 500

  • Replacement kit charging circuit board firmware and battery for FDCL
HCRH1

Hinge Combination Roller Hinge Assembly #1 Galvanized

CAPACITOR031R

Manaras Capacitor 324-389uf incl. Bleeder Resistor

RESET014

Manaras Resettable Overload Fuse 17A 1 Phase

BINS-WHITE

Utility Bin Heavy-Duty Stackable White *** To Extent of Inventory

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
MV-00147

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Key Lock-out & Pilot Light 24V

MB-01002

Micanan Electric Motor Only 1/2HP 110/220V 1PH Base Mount TEFC FR56

  • Base Mount TEFC electric motor
  • Fits models: TW TBW JWHWHHDW SDW
26CW94525-CUT

Truck Door Intermediate Panel (15" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
37350R

Genie Network Adapter GN-BX

  • To be used in conjunction with Closed Confirm remote.
  • For use on IntelliG® and TriloG™ Pro Series models when using any Genie-Net Accessory.
Programming instructions
TL-5000

Trailer Lock Lever 32-1/4" long Stainless Steel

  • Provides leverage to easily open shipping container doors
  • 18-8 Stainless steel construction
  • Polyurethane coated handle
  • 5.5 lbs.
  • 32-1/4" long
  • Fits most modern container door handles
    • .......more details
CF-101-18

Commercial Side & Top Weather-Strip 18' Long Aluminum / Vinyl

  • Same as Garaga CF101
19051

Doorlec VBelt 5L370

  • works on model ETBX
LB406-14

Laminated Bumper Standard Black 6" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
GAREX-DOORFACE

Garex Special Order Door Face Only

  • Ordered to the customer's exact requirements
5001-9-DK-BROWN

Residential Side & Top Weather-Strip 9' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MK-00429

Micanan Reversing Relay 24VAC Coil 4-Pole QPDT 14-Pin Flange Mount

  • For PRO-LJ LH LHAB
26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

  • This limit shaft will work on all Side-Mount Doorlec Openers
  • Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread
LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
111526.0001.S

Overhead Limit Shaft for RHX

  • For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.
MIRM-T2

Miller Edge Patriot 2 Photo Eye Monitored 30ft Non-Contact ** NLA

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
    • .......more details
L-4-18-0-M

Cable Tie Standard 18 LB Black 4" Nylon 1000/pkg

  • Length: 4.12" / Width: .095" / Thickness: .042" / Diameter: .875"
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
CS303-DB50

EMX Car Sense Direct Burial Sensor with 50 ft Lead Wire ** Replaced by the LRS-DB-50

  • Can be used for above ground applications ie.. strapped to a post or wall
  • Easy low cost installation
  • Small size of the detector allow for easy installation in pavement
  • Rugged sensor is also suitable for above grade installations
  • Includes direct burial sensor and 50 ft of lead wire
  • Advanced 3-axis technology for better detection
    • .......more details
1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

CP-LX225

Lynx Enhanced Relay Board

.250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
PRO-HBH-7511R-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Left Hand (PRO HHDR)

  • 3/4 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

  • Five feet long.
  • OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
  • The weight of the vehicle compresses an electric switch which sends an open signal to the door.
  • Requires a 2-wire connection to the operator but does not require power to function
H12G09-SS

Hinge #9 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

  • For models MT BMT MJ mechanical operators
  • Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring
E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

7097

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Roadside (LH)

  • A Whiting original
  • Cable drum and bearing
GH153-L5

LiftMaster Gearhead with Brake 1-1/2 HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
.343-2-5/8-RH-C

Torsion Spring .343 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 2-5/8" Length: 12 ft
.295-2-5/8-RH-C

Torsion Spring .295 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 2-5/8" Length: 12 ft
41A5434-13

LiftMaster Full Belt Assembly for 8ft Door

  • For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D
41A5434-14

LiftMaster Full Belt Assembly for 10ft Door

  • For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D
K1D6597-1CC

LiftMaster Control Board with Heat Sink CSL24V & CSL24VH

  • Control board for CSL24V and CSL24VH gate operators
  • 014D1058M
K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

  • 14D1279E
Programming InstructionsInstructions de programmation
K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

  • For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
  • Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.
G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

  • Increases one number each time current is applied
  • Connects to the 24 volts of contactor coil
  • Simple 2-wire connection
  • Same as 50-12862
MK00736

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored ** use MK00641-NM

  • For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
  • Board has 5 relays
Instructions Manual
MH00099

Micanan Bearing

  • Fits PRO-APT and PRO-HHD
  • Requires 2 per shaft
  • 3/4" Bore
14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

  • I-Beam Chain Drive Rail for model 3595
ME113-E

Miller Edge Black End Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
372LMC*

LiftMaster 2-btn Security+ Transmitter 315 MHz ****Discontinued - Replaced by 892LT**

  • Both buttons feature Security+ rolling code technology
  • Compatible with models manufactured from 2005
  • Second button can learn other shared Liftmaster radio-controlled devices.
  • Includes visor clip and Lithium battery CR2032
  • Obsolete as of 9/31/2012 - Replaced by 375LM 892LT or 894LT
41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

  • Gear and sprocket assembly for belt drive units after 2002.
  • Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.
Installation ManualManuel d'Installation
CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

  • Reversing contactor with 24V coil
  • Same as part # LC2K12107B7
  • Demensions: 3.5" long x 2.25" wide x 2.25" high
  • Use 03-8024K as possible replacement
VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

  • Used on MJ / MJH models
  • New belt type A replaces old 4L360. Part number VBELTA34
2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.162*180
HAE00033

Linear 8ft Belt & Inner Slide Assembly (HBT8)

HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
7953

Whiting Truck Door Hinge Gasket White

4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1104-14FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 14' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1106-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

  • Aluminum retainer with black dual fin vinyl
27-20307

Truck Door Balancer Bracket End - Roadside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W # 2524 for # 2376 balancer
27-20126

Truck Door Spring Spacer 33" long for Whiting Roll-Up Doors

  • Extruded PVC construction with zinc plated thrust washer.
  • Cross Reference: 2471
26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
25E10051

Truck Door Center Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #15 T #70159
  • Box quantity: 50
MD00086

Micanan Sprocket 40B18 x 1" 1/4" Keyway

DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

  • Activates one Delta-3 receiver for remote stop or reverse safety edge
  • No cables or coiled wires
  • Mounting screws (4) supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
TRANSF088

Manaras Transformer 480-24V 40VA

  • Transformer 480V Primary 24V Secondary 40VA
20111

Doorlec Cam Retainer Plate Springs *** Replaced by 26117

  • Works on GH/GHX
TXTA-200

Pulse 3-BTN Transmitter 315MHZ

  • Three-Button Transmitter: Can be programmed to operate with up to three different receivers to operate up to three doors or for Open Close and/or Stop functions
  • 315mHz: Works with RXTA-100 and RXTA-200 or as replacement unit for other LM receivers with 315MHz frequency.
  • Provided with visor clip for forklifts and trucks.
  • FCC Approved
JHDC22X4BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 480V 3PH 60 Cycles/Hour 2200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
BGARMFOAM

TECHNA Barrier Gate Arm Foam Insert

  • esigned for use with the TECHNA Barrier arm this 14' roll of extruded foam offers additional protection reducing the chance of vehicle scratches •IP68 rated waterproof LED lights •Operating temperature: - 13F to 140F ( -25C - +60 C) •Weight ~2lbs
IP-MONB

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System in Black

  • Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in black.
  • IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
  • Also available in white: IP-MON
  • SIP Server
  • Operating temperature: -10C to 55C
  • Call recording and built-in memory
    • .......more details
MD00027

Micanan Disconnect Coupling 3/4" ID PRO-J/LJ

  • Sold individually
GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

  • Compatible with various LiftMaster® Swing Gate Perimeter Access Systems
10BOX45RNDSM

4.5" Round Surface Mount Box

  • 4.5 inch round surface-mount box for 4.5 inch round push plates.
19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

S50E-PAIR

LiftMaster Small Profile end kit for one edge only 8.2KOhm resistance

  • Fast easy to install and cost effective system no glue is required
  • One end for output wire other end with resistor for monitoring
  • Compatible with S50 Small Profile Edge
  • Includes: (1) set enough for one edge
  • p/n 1804-1463
S6TL2641E15

Erone 18-Channel Handheld Transmitter 433MHz

Wireless System Chart
DS75-INSULATED

Light Commercial Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

  • Mini Storage door non insulated with exterior curtain lock
  • Custom ordered to exact size
CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

  • Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
  • Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
  • Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
  • Dimensions: 6.15” x 4.13” x 4.74”
OHJ-6113-M-N1-RH

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph Monitored ECB w/N1 Photoeyes RH

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
VME1-230-1

Pivin Drapeau Electric Motor 1HP 230V 1PH FR56C

OTBH-6213-1-M-N1

Manaras Trolley Operator 3/4 HP 240V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
ZAP-8070

Zap Auto Lock 8070

  • 8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation
DS200-9X6-WHITE

Wayne Dalton Mini Storage Door White 9x6 ** Price by Quote Only

  • Mini Storage Door Made to Order
BCSI-PM203

Pivin Drapeau Chain/Spring Tensioner BCSI Gate Operator ** Price by Quote Only

03-35711

LiftMaster Contactor Relay 24V

  • Contactor Relay Replacement Kit (24V 2NO+2NC)
19-40100-SS

Roller Chain #40 Stainless Steel 100ft Pack

  • 100ft length Stainless Steel
LRS-FP-50

EMX Sensor Flat Pack 50ft Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes sensor and 50 ft of lead wire
    • .......more details
7500-FS-GALV

Fire Shutter Hot-Dipped Galv Interlocking Slats Made-to-Order

  • Shutters can be up to 13'- 6 inches wide and 12 feet tall with UL labels Class A B or C while still being able to function as normal counter rolling shutters.
  • Oversized fire shutters can be manufactured up to 20 feet wide
  • Model 7500 fire shutters can be installed with either a manual lift external motors a hand crank with or without automatic testing tubular models with the option of automatic testing
  • Along with UL labels that will automatically close the fire shutters for either 3 1½ or ¾ hours the fire shutters can also be manufactured with smoke protection
  • Available finishes: Hot-dipped galvanized steel with an optional baked-on gray polyester enamel coating or 304 stainless steel with a number 4 finish flat profile
  • The viscous speed governor can be set to automatically close the fire shutters at speeds of 6 inches per second up to 24 inches per second complying with NFPA 80 specifications.
    • .......more details
SBB-2-V3

2" Safety Bottom Bracket European 231721 Sold as a Pair Torque Force

  • Includes 1-Right hand and 1-Left hand
  • Zinc plated Steel
  • Max Door Weight: 1000 LBS
  • Cable attachment: Adjustable
  • Protective cover: Yes
  • Use with: Straight track 2"
    • .......more details
GH-311-1

Doorlec Industrial Gearhead Door Operator 1 HP 115V 1-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details