Devanco Canada - Get The Right Garage Door Opener‎ and Parts

RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

Open/Close/Stop remote for 4 doors.
By selecting A B C or D on the rotary switch you can operate any of the four doors.
Comes with LED battery life indicator.
9V battery included.
Can be wall or post mounted.
Must be used with 4 MCR series receivers.

.......more details

Programming Instructions

1104-16FT-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

93-00240

Truck Door Spacer Washer for Rollers

Used with Rollers to help adjust Roll up doors
Cross Reference: T #80020 W #6 #66 140100

91-00506

Truck Door U-Bolt 1-3/4" long

Zinc plated finish
Used to attach cables to Whiting doors
Cross Reference: W #70-5

26-14521

Truck Door Intermediate Panel (11" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

H11G05

Hinge #5 x 11 gauge

11 gauge # 5 hinge - 0.76 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

CB332A0500

Cable 3/32" 7x7 500' Galvanized

Galvanized cable 3/32" 7x7 500ft spool.
Cable break strength: 920 lbs.

Comparison charts

R5114

Shaft Bearing 1-1/4" Machined 900LBS

Standard press-in bearing no retainer
Rated for 900 lbs

903024ORBG

Operator Reinforced Bracket 24" Galvanized

Comes with clevis & clip pins. 12 per carton.

4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

BK200

Flat End Plate with Bearing 5-5/8" 4-Hole Sold per Piece

8-gauge

7144.96

Whiting Bottom Aluminum U-Channel For Coldsaver 96" long

Bottom seal sold separately

32-48-120

Extension Spring 8' Door - 120 lbs Green *** Replaced by 27-48-120

Double - Loop
32" long 48" stretch 120 lb load
Springs sold individually

Spec Sheet

SPECPARTEL001

Manaras 3-btn Push-Button Control Station with Pilot Light Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.

60-6560-A-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Asphalt **** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

RS1024

Roller 2" Steel 4" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 3.5" Overall Length: 4.5"
Box qty: 150 Box weight: 53.3 lbs (2-4-10 steel)

MA012

LiftMaster Cam Arm with Magnet

Cam Arm for Liftmaster Mega Arm gate op.

ME00007

Micanan Jackshaft Drive Shaft 1" x 15" L c/w KW

2 required per machine
Sold individually
1" x 15" long

CABLE_516SS-500

Cable 5/16" 7x19 500' Stainless Steel

15-48B18LGE

LiftMaster Sprocket 48B18 1"x 1/4"

Also known as: 15-9004 1548B18LGE 159004

SW-500-ADAPTER

Devanco Industrial Spring Winder 500 for 3.75" - 6" Adapter for Richard Wilcox Torsion Spring Plugs

Adapter for SW-500 to be used with Richard Wilcox spring plugs
This adapter is 5 mm higher than the universal model

AIRSWITCH018

Exterior Air Switch SPDT ABS Housing

D800-120-1

Cable Drum High Lift 800-120 1" HL Pair

Adjustable cable attachment with screw
Made of aluminum
High Lift capacity: 120" max
Flat capacity: 266" max
Rating: 2200 lb per door max
Keyway: 1 KW of 1/4" width

.......more details

461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

2241GRB

LiftMaster Adjustable Guide Roller Bracket Sold Each

LiftMaster Guide Roller Adjustable Guide Roll Bracket (req. for dual system) (Corrosion Protected-Zinc)
Adjustable bracket provides ability to mount 2 Guide Rollers

GALV-306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-6-INSTALLED

5001-16-SANDSTN

Residential Side & Top Weather-Strip 16' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

041D8993

LiftMaster Cover Silver 8365W 83650-267

Replacement LiftMaster® Cover.
Compatible with various LiftMaster® 8365W Series WiFi® AC Chain Drive Garage Door Openers; powered by myQ

31373-114

Doorlec Sprocket 60B36 1-1/4" Bore

GALV-331-258-144-R

Torsion Spring .331 x 2-5/8" x 12ft RH Galvanized Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GD-STEND-24D-2

End Cap Steel 16G 24" Double 2" Thickness

Galvanized Steel 16-ga (1.42mm) thick.

MA024-10RDOT

LiftMaster Articulating Aluminum Arm 10ft x 3in w/Reflective DOT Tape (Hardware Kit NOT Included)

For use on Mega-Arm gate operator
Hardware kit MA033 NOT included
Red & White Retro-Reflectorized DOT Tape

PHOTO-073

Manaras Non-Monitored Intrinsically Safe Retro-Reflective Photocell 30' Range incl. 3" Reflector

Retro-Reflective photo cell

2100-1750

Linear Key Brake Disc 1/4 x 3/16 x 1-1/4

OPJ-6114-M-N1

Manaras Heavy-Duty Jackshaft Op 1 HP 120V 1PH Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

MR00008

Micanan Disconnect SASH Chain Sold per Pack of 10'

234-143

Serco 3/4" SAE Flat Washer ** Price by Quote Only

For Serco loading docks

12-1008

PVC Strip 12" x .120" Standard for Replacement Strip Curtain Sold per Foot

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

MOD114C

Manaras Synthetic Oil Upgrade for MGH up to 1.5HP

This Upgrade Mod. is only available when purchaed with a compatible operator
Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances

O02R9502

AirLift Rebuild Kit Orig. Op. w/Brass Nut

Q055

LiftMaster Limit Switch Kit K75-50189

Also known as: Q166 Q165

41C0589-2

LiftMaster Belt Cap Retainer

Also known as: 041C589-2 41A537 41C589-2
For use with various LiftMaster® and Chamberlain® DC Belt Drive Garage Door Opener Models such as 85503
Complete kit includes: Sprocket sprocket cover and replacement screws

SF600S-RIGHT

Spring Fitting 6" Pair Stationary + RHW 1" Shaft

Cones for 6" ID Right Hand Wound spring wire
Not universal thread

ALUM-322

Aluminum 24" x 100' Spool Red # 322

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 322
Reverse side is #431 Bright White

Colour chart

41A5257-3

LiftMaster Hardware Kit *** No Longer Available

Hardware Replacement Kit. For use with various LiftMaster® Residential Garage Door Openers

122930

Marantec Synergy LC Light Duty Comm. Trolley Opener 315 MHz Head Only

HomeLink compatible
For installation on sectional doors only
Precision Controlled DC Motor Complete with Automatic Soft Start and Soft Stop Feature
Higher Motor Operating Speed: Provides faster open and close cycles
Timer-To-Close: Provides automatic door closure
Convenient Status Display: To indicate the status of your door operator at any time

.......more details

25-42-320

Extension Spring 7' Door - 320 lbs Green w/ clip

Double - Loop
25" long 42" stretch 320 lb load
Sold individually
Rated for 10000 cycles

MG00007

Micanan Hex Nylon Lock Nut 6-32UNC

K77-19130

LiftMaster Hardware Kit LA400 LA412

MA034RDOT

LiftMaster Articulating Square PVC Arm Kit Red/White with Retro-Reflective DOT Tape 9 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe
9 ft. x 2.5 in. square includes hardware kit (MA033)

Additional arm accessories

109290

Amarr/Alpine Snap Latch Supply Bag for 1 3/8" Thick Doors *** Price by quote only

Is needed when 105381: T-Handle Lock Kit for 1 3/8" thick doors are ordered or the lock won't work.

MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

This will only work in the Pro LH operator.

J753L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 575V 3Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

30004

Doorlec Brake Solenoid 460V with wire leads

CP-SH-58-1012

Lynx Center Shaft Only for MCJH 5/8" x 10-1/2"

71-909210MD

LiftMaster Field Mod. Dual Aux. Limit Switch

WHITING-PW

Whiting White Urethane Topcoat Option Dry Freight Door Panel

This is an option when ordering a panel

CAP425

Capacitor 125VAC 425MFD

Motor Start Capacitor 125V 425 MFD

14-1014

PVC Roll 8" x .072 Standard Clear Ribbed 150' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.
Ribbed grade – for greater abrasion resistance and longer lasting clarity

31104

Doorlec Sprocket 41B23-5/8"

PRO-GH-10011U-R

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

.243-2-R-C

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

LM2W-B

LiftMaster Photoelectric Smoke Detector 12/24VDC Standard 2-Wire (LMPD24-2W)

Plug-in detector line mounting base included
Large wire entry port
In-line terminals with SEMS screws
Mounts to octagonal and single-gang back boxes 4-square back boxes or direct to wall or ceiling
Stop-Drop N Lock attachment to base
Removable detector cover and chamber

.......more details

MW-00057

Micanan Splash Proof Cover Light Duty Fully Assembled

Splash proof cover for models: PRO-LJ J LH LHA and GJ
Same as MP-00253

PRO-J-7543-U-RH

Micanan 3/4HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-TB-10021-U

Micanan 1 HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

60-7248-888

Wheel Chock Safety Pkg incl'd: laminated chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 88-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Fabric Reinforced Tire Rubber
Galvanized Steel Sides
Size: 8" wide x 8" long x 8" high

42GRR-9001

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 20-40VAC 10-55VDC 4VA

2528.093

Whiting Dual-Spring Shaft 93" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes pre-drilled
For Whiting balancer #2376

HRB-7

High Riser Bracket for 7" Above Dock or Higher 7"

High Riser 7" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

LB1210-14

Laminated Bumper Standard Black 10" x 14" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1012-24

Laminated Bumper Standard Black 12" x 24" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

T008

Manaras Trolley Track 8ft for 1/2HP models *Actual length 126"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

MF00019

Micanan Hex Head Bolt 3/8"- 16 UNCx1 Full Thread

Used on PRO-GHC
6 required per operator

MH00003

Micanan Oilite Flange Bushing 3/4 ID x 7/8" OD Sold Individually

2 required per machine

VWS-34-BLACK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Black

Pan head
S point

MK-00519

Micanan Surface Mount Fused Disconnect Modification

Mounted to control panel cover in lieu of primary fuse block inside panel

1104-7FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

36773S

Genie Carriage Assembly for 8' Door

Works on Genie IntelliG 1000 & 1200 Garage Door Openers
Includes: carriage emergency release rope and straight arm.
Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.

HSO112

Hinge 1/2-Hinge OHD "A" Style 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish

MOUNTSHAFT012

Manaras Clutch Shaft Kit for MSJ

MP-00008

Micanan Two-Door Interlock Modification

Only allows one door to be opened at one time

MP00064

Micanan Track and #41 Chain for 12' h Door *Actual length 174"*

For 3/4 & 1 HP Micanan trolley operators

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

.......more details

PRO-TB-7553-U

Micanan 3/4HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks
Full function Smart 10.0 logic control board featuring on-board receiver
#41 roller chain drive
Solenoid brake standard
External radio control strip
Three button O/C/S control station Nema-1 included

.......more details

34201

Doorlec V-belt Pulley MA20 2" x 5/8" bore

27-24200

Truck Door Single Torsion Spring Assembly 96/60 for Todco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 96" Spring Length: 60" Wire Size: .243
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire
Heavy-duty cast aluminum cable drums hold up to 130" of cable

.......more details

37222R

Genie Series III Deluxe Wall Console

3 function wall console for use with IntelliG™ and TriloG™ openers.
Same as GBWC-BX
3 function console operates door opener controls lights and security lock out switch.
Not compatible with Series II

EHJ-383-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 208V-3Ph

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.

41D7570

LiftMaster Light Lens (41D7572)

Also known as 041D7572 41D7571 41D7570 41D7572 041D7571 041D7570 041-0144

POCKETWHEEL007

Manaras Pocketwheel Assembly with rollers and clips (Hoist-A-Matic)

Includes POCKETWHEEL005 CAM012 and CLIP020

3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
Maximum recommended duty cycle: 10 cycles per hour.
UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
Heavy-duty 24V DC motor provides ultra-quiet operation
Push button limit setting

.......more details

Installation manual Sell sheet

CHI-SPECIAL

C.H.I. Special Order Door

Special order as per customer's requirements

K72-33192

LiftMaster Limit Shaft Kit NEMA 4 & 4X for H J HJ GH GT T & APT Operators

For: NEMA 4 & 4X for H J HJ GH GT T & APT Operators
Shaft measures 12" in length
Compatible with Logic 4 and Logic 5 operators

104255

Allstar Clip only for 8833TC

Clip only

CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

105104

Linear Gate Safety Edge Transmitter

105104 is for adding obstacle sensing for motorized gates or barrier arms.
Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
Activates receiver for stop or reverse entrapment
No cables or coiled wires

.......more details

Installation Manual