Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

  • Sold in increments of 5ft to a max of 25ft
DC300-75-1-WP

Dyna-Hoist 300 Series Direct Drive BBU 3/4 HP 110/240V 1" Shaft 20' Lead Weather-Resistant ** Quote Only

  • Special-Order. Price by Quote Only
  • Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
  • The 300 series also works with and powers 12V automatic lock systems
  • Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
  • Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
  • 30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering
    • .......more details
27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

  • Frame size is 56C
E/1929/234

Automatic Systems Rod Lever Assembly (BL229)

  • Used on the BL229 gate op.
10-10354

LiftMaster Brake Release Arm **To Extent of Inventory

  • his is a replacement Brake Release Arm. For use with various LiftMaster® Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
  • Also known as: 106106
BL229-L-SPP-5M

Automatic Systems Round Arm Left Sol 1 16'5" (5m)

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • C/W BL229 Left Sol1 Round Arm 16'5 Safety Edge Red Arm Lights (2 sets of lights)
TS-1-207-GALV-KEY

Tube Shaft 1" x 207 (17'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
E/BLOP/116

Automatic Systems Anti-Corrosion Base

Z9959

Tension Release Hub Torsion Spring Back Winder

  • Safely back wind the torsion springs in tricky “slipped cable” situations
  • Easily slide and tighten the solid steel hub on either end of the torsion shaft to back wind the torsion springs using a 5/8" winding bar unwrap and re-install the cables on drum
  • Can be used on 1" solid or hollow shafts
36310

Doorlec Flicker Relay OFF/ON 120V AC

GALV-343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GAREX-24X12-CBRN

Garex Thermo Window Clear 24" x 12" Commercial Brown Frame

  • An original Garex window
  • Fits 1-3/4" thick door R16
H11G07-SS

Hinge #7 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G06-SS

Hinge #6 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G05-SS

Hinge #5 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
CP-SH-34-MC3-65

Lynx Complete Limit Shaft Assembly #65 Chain

  • For trolley operator
5001-8-CREAM

Residential Side & Top Weather-Strip 8' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

  • Chain pack only
  • TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors
OGH-6232-M-N1-RH

Manaras 1/2 HP 208V 3Ph Gear Head Operator w/Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

  • For trolley operator
OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
GALV-375-334-R

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
DOCK-SEAL-R600

Dock Seal R-600 Adjustable Curtain Seal Price by Quote Only

  • Made to order - Price varies according to specifics
  • This model is ideal for door openings of 8′ wide x 10′ high
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
    • .......more details
R-600 Order FormCatalogueInstallation Instructions
GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
K41-0410-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Hoist

  • For Maxum Hoist 1200 Op
MI00034

Micanan Pulley 9" OD c/w Bushing 3/4" ID

R2T

Erone Radium Mini 2-Button Transmitter 433MHz

  • The RADIUM remotes are compatible with all standard 433 MHz RADIUM wireless receivers.
  • They have been designed with a high security coding system (KeeLoq® Hopping code).
  • A special algorithm ensures a continuous synchronization between the receiver and transmitter
  • Range up to 820 ft (250 m)
  • Two CR2016 batteries included
Wireless System Chart
CP-PU-AWNING-1

Lynx Awning Pulley 1" MCJH

GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
GALV-406-6-144-L

Torsion Spring .406 x 6" x 12ft LH Galvanized Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
DWI-LOCK

Doorway Impact Monitored Slide Slock V2

  • Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
  • Connects to an Air/Impact switch to mechanically and electrically lock the door.
SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

  • With built-in Paradox tag
  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart
CP35

Roller Chain Puller 35-60

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
OTBH-6534-M-N1

Manaras Trolley Operator 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
E/1929/023

Automatic Systems Balance Spring Ass'y 5.5 MM BL229

  • Used on the BL229 gate op.
OSH-6114-M-N1-RH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
10TD900TR

Transmitter 900mhz Touchless Wireless Converter

  • Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
  • Microwave doppler technology allows for consistent and reliable detection.
  • For automatic door apllications.
  • Compatible with 10RD900 and 10BR2900 receivers.
  • IP65
  • Nema 4
    • .......more details
LPEXP

LiftMaster CAPXL Loop Detector Input Board

  • Automatically trigger a phone call to a guard or office when a guest arrives
  • Mounts inside of CAPXL
  • Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
  • Operating Temperature -20°F to 130°F (-29°C to 54°C)
  • Dimensions: 2.8” x 2.3”
K005-KEY

Replacement Key for 3BXLT Key #5

  • Replacement key only for key #K005
WHITING-ST

Whiting Strap Mounted Inside Door Option

  • This is an add-on option when ordering a Whiting door
SPR410B12X5/8

Sprocket 410B12 x 5/8 K3/16 2S1/4-20

MOTOR337

Manaras Electric Motor 3/4HP 120/240V 1PH

  • C-flange continuous-duty
  • For gearhead operator
2110-236

Linear Shaft Output Assy HSLG Ups

MG00020

Micanan Flat Washer 1-1/16" ID x 1-3/4" OD

MQ00020

Micanan Spring Pin 3/16" x 1-3/4" Long

Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

  • Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
  • Also known as: 94-50287 K94-50287
MV00080

Micanan Emergency Egress Device 15ft

OSH-6214-M-N1-LH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
TDC1222-10

Liftmaster Comm. 10FT Trolley Angle set (10-5810-P x 2) and #41 chain pack (TDC41-10) ___ ***Actual length 155"***

  • Double Angle Rails for doors up to 8'6" high
  • Includes #41 chain pack
TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #48 chain pack
343

Cable Clamps Galvanized 3/8" Sold per piece

  • Galvanized malleable cable clip
6200-2-7-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

  • 2" diameter white nylon tire
  • 6200 sealed precision bearing
  • Zinc plated 7.04" Overall Length 5.96" stem
  • Rating: 100lb; 100000 cycles of a 12′ door
400-CBAC-STD-115V

FAAC Standard Gate Arm w/Positive Stops 40-1/2" L *** Price by Quote Only

  • 400 CBAC Standard (Short) Arm with positive stops 40-1/2" tip-to-tip
  • Replacement arm for hydraulic Swing Gate Operator 10420112.5
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
  • Dimensions: 40.5 x 3.35 x 3.35 (1031mm (L) x 113mm (D) x 85mm (H)
OGH-6534-M-N1-LH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
GH751L5-LH

LiftMaster Gearhead with Brake 3/4HP 115/230V 1P L5 Left Hand ***No Longer Available

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GALV-343-334-144-L

Torsion Spring .343 x 3-3/4" x 12ft LH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-343-258-144-R

Torsion Spring .343 x 2-5/8" x 12ft RH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-283-334-144-R

Torsion Spring .283 x 3-3/4" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-334-144-L

Torsion Spring .283 x 3-3/4" x 12ft LH Galvanized White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-334-144-L

Torsion Spring .273 x 3-3/4" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-2-144-R

Torsion Spring .250 x 2" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-225-2-144-RH

Torsion Spring .225 x 2" x 12ft RH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized
MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Specification Sheet Drawing Diagram
INFLAT-DOCK-SHLTR

Inflatable Dock Shelter *** Made to Order Sold by Quote Only

  • Custom order item. Sold by quote only
BEA-10PS12-24

BEA Power Supply UL/ULC Listed

EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

  • Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners
0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

  • Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
  • The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
  • The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
  • The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
  • By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
  • The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.
    • .......more details
2300-390

Linear Friction Disc 5.5 x 2.06 x .18 pair

PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
SHAFT064

Manaras Limit Shaft 5/8"-24x12.5

RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

  • The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
  • Soft-Starts and Soft-Stops
  • Electrically activated drum-band type solenoid brake
  • Ceiling-mounted with 8.69" headroom clearance required below the tracks
  • Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
  • Tracks sold separately
    • .......more details
T120

Manaras Trolley Track 20ft for 3/4HP & ALL APT models up-charge

  • For models MGT/OTH/OTBH/RTBH 3/4 hp only with Chain #41
15470

Doorlec Heater Strip 250 W 120 V

9003-200-13-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 13' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
2100-669-UPS

Linear Hub Clutch Cast Ir Pinned UPS HSLG

GALV-375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-375-6-144-LH

Torsion Spring .375 x 6" x 12ft LH Galvanized Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
MGH-6234-M-N1-RH

Manaras 1 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Specification Sheet Drawing Diagram
PRO-EHJ-7583U-RH

Micanan 3/4 HP 208V 3PH Cont. Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • Comm / Ind Continuous Duty Belt Drive with Emergency Chain Hoist
  • 24V class 2 control circuit with 40VA transformer to protect against short circuit
  • On board receiver with antenna
  • External radio control terminal strip
  • Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly •Three button open-close-stop control station Nema-1
  • Continuous duty industrial motor with overload protection
    • .......more details
Installation Manual Specification Sheet
11442

Limit Switch w/Roller Wheel Lever for MBAR

  • Used on M7BAR Ops
9-14-1

ARB Bracket 18-24" Adjustable Zinc Plated Half Hinge

  • Also known as Operator Reinforced Bracket
GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-258-L

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-207-2-144-R

Torsion Spring .207 x 2" x 12ft RH Galvanized Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Galvanized Yellow/Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GEAR014

Manaras Disconnect Bevel Gear 5/8" 20 Tooth OGH

MGR20-B-2U-M-P/FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Monitored Sold Per Foot

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty •Monitored edge - pls specify the operator edge is connecting to •Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)
C-514-114-INSTALLED

Cones 5-1/4" 1-1/4" bore Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF514U-114
O02R2401

AirLift Op. Retaining Rod Complete 8ft Std Op. ** Price by Quote Only

SETR2641AM1AN-C

Erone 1-Channel Mini Transmitter Grey 433MHz Proprietary Encoding

  • Heavy-duty construction
  • Elegant & easy to carry
  • Light grey and blue base with grey buttons
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart