Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

  • Shoulder Bolt
  • For SW470-S3
  • Formerly 82SB5008 G82SB5008
ME123-M-YEL-U

Miller Edge Yellow Universal 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ME123-M-BLK-RH

Miller Edge Black RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
9372263800

Square Torsion Spring .375 x 6 x 38" with Cones LHW 1-1/4" Bore

MCT-1

Linear 1-btn MegaCode Visor Transmitter 318 MHz ** To Extent of Inventory

  • Activates one 318MHz MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
    • .......more details
CHI-SPECIAL

C.H.I. Special Order Door

  • Special order as per customer's requirements
1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

  • Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
  • Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
  • 4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC
MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
7272105

FAAC 400 Cover

19-48047MN

LiftMaster Roller Chain #48 x 47 Nickel Plated

  • #48 x 47 pitch with master link
K20-1050C-2T

LiftMaster Electric Motor 1/2 HP 230V 1 ph CF

  • For gate op. SL580-5011
20001

Doorlec Brake Spring

  • Fits LJ/LJH
OSH-6213-ECB-LH

Manaras Opera-SH 3/4 HP 240V 1Ph with Electronic Circuit Board Left Hand *** To Extent of Inventory

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation manualSell sheet
REDUCER025

Manaras Reducer 45:1

TC3-411

Lynx Commercial Trolley Op. 3/4HP 120V for 14' High Door with Brake Contactor

Sell Sheet
HTUS

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Single Slot

  • Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Adjustable from 2"-3-1/2"
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K20-1050B-2LP-H24

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 3 Logic 4 Logic 5

  • Standard 1/2 hp motor for new L5 operators
36764A

Genie Chain and Belt Pulley (#39591A)

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Both for Chain and Belt Openers
  • Front Idler Pulley for Genie 4024
  • New part number #39591A
MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

  • Continuous-duty base mount
  • This item is compatible with BRAKE011
MOTOR403

Manaras Electric Motor 1/2HP 120V 1PH

  • Instant reverse
  • Medium-duty 1500 rpm
  • For OMJ/OMH
CP-BRG-1

Lynx Bearing 1" *** Replaced by HW-BRG-1

  • 2 in total on a MCJH
MK-00511

Micanan Resistor 330 OHM 5Wc/w Leads (For Motor)

ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
BMBOX-HARDWARE

Complete Hardware Box for Big-Metro BMBOX

  • Foundation box for Big-Metro gate operator
  • Kit includes: (1) #60 – PMD1025.4610 – MECHANICAL STOP BOLT NUT (1) #62 – V12X30.5102 – BOLT MECHANICAL STOP (1) #63 – D12B/5110 – NUT MECHANICAL STOP (1) #61 – D18.5110 – NUT M18 (1) #52 - 5PMCS1.4630 – BALL BEARING (1) #58 – PPD2288.4540 – NYLON HINGE COVER (2) #65 – 16X1.5124 – SCREW FOR LID COVER (4) #64 – D.12.5110 – NUT M12 LOCK NYLON
25-01434

Truck Door Stainless Cables 110" 1/4 nylon eye 7x19 Pair for Roll-Up Doors

  • Works with both Whiting and Todco doors
  • Nylon eye ends are used 1/4" and 7/16" eye cables
  • Cross Ref: W4020-1
1104-7'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
510.3228.07

Whiting Double End Hinges DF Mild/Nylon - 7 Panel Door Add-On Option

  • dd-on option when ordering door.
MALED17

LiftMaster LED Barrier Arm 17 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
  • Counterweight required part # MALEDCW
.250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Green

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
CP-LX100

Lynx Control Board with Cover for UL325 models

  • For all voltages
Programming instructions
10-11021

LiftMaster Disconnect Lever GH

4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

  • Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
  • Compatible with DJ J operators
.262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
DXR-702

Linear 2-Channel Digital Receiver 315 MHz *** Discontinued

  • A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
  • When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
  • The relay has four optional output configurations.
  • 32 transmitter capacity
  • RF activity indicator
  • Quick-learn programming
    • .......more details
Installation Manual
N7/9-MOD

Micanan Explosion Proof Modification

  • Modification available on certains models only
SPF514-6

Spring Filler 12 ft Long No Fins

  • For use with 5-1/4" or 6" torsion springs
  • Accomodates both 1" and 1-1/4" shaft size
RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

CPT-210-K5

Miller Edge Non-Monitored End Plug Kit *** Discontinued

  • For use with CPT-210-50 bulk extrusion
  • Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive
PEDALU4272

Aluminum Pedestal Post Dual Height 42" & 72"

  • Pedestal post with hood
  • High quality aluminum
  • 42" & 72"
  • Dual face-plate allows for easy wire connections
Shop drawing
DL91201

LiftMaster HID PROX 1346 ProxKey III *Discontinued Replaced by LMPK3-ST*

  • Pocket size key fob
  • Low cost entry level compatible with HID Prox Readers.
BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • 02-102 Open/Close Push Button Included
Installation ManualSell Sheet
1007-1-5/8-14

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
7001-WG-16-CO

Residential Wood Grain Side & Top W/S Cherry Oak 16' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-10-CO

Residential Wood Grain Side & Top W/S Cherry Oak 10' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
39-16759

LiftMaster Clutch Pad for EGJ ***No Longer Available NO SUB

MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
COVER048

Manaras Plated Solenoid Cover for OSH

  • Cover only
CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

  • Galvanized cable 3/16" 7x19 500ft spool.
  • Cable break strength: 4200 lbs
  • A higher quality cable compared to the Chinese cable
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
HTRKITRSW

LiftMaster Self-Regulating Heater and Coil for RSW12V **DISCONTINUED

  • Protects system to -40F.
  • Installs into the operator frame
  • 120V
.295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
K23-19380-2

LiftMaster Reset Switch Kit for Miracle-One

  • Reset switch and Harness
MHH-002

Magnetic Handle Set Black Set of 2

  • Decorative handles only
  • Black flexible magnetic material with deep embossed design
  • Mounts flush on door
  • Sold as a set of 2 handles
361LMC

LiftMaster 1-btn Digital Transmitter 315MHz ***No Longer Available

  • 9 dip switch 315MHz transmitter
  • Compatible with Commercial operators L3 & L4
  • Visor clip and battery included (GP23A)
Programming InstructionsInstructions de programmation
5001-10-CHARCOA

Residential Side & Top Weather-Strip 10' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

  • Prevents the 1104 from buckling in the hot sun
1104-ASFT-7FT

Elton Aluminum Stiffener for 1104 7ft

  • Prevents the 1104 from buckling in the hot sun
25-2006

LiftMaster 6 Amp Overload Fuse

  • For models: SL585-50-21 SL858-50-81 SL595-50-21 SL595-50-81 SL575-50-21 SL575-50-81
68-9E

Wheel Chock 68-9E Pyramid Rubber with Eye Hook

  • Handles for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 9" long x 6" high
OVERLOAD002

Manaras Telemecanique Overload 3-ph 1.2 - 1.8A

  • Telemecanique # LR2K0307
111883.0001

Overhead Logic Board for RMX

  • Replacement circuit board kit for the Overhead Door RMX commercial operator.
  • Replacement circuit board for the Overhead Door RMX commercial operator. UL 325 2010 compliant.
  • This circuit board replaces part #110955.0001
4-11-7R

Roller 3" 10-Ball 7" Stem Nylon

  • Sealed bearing for long life in dusty conditions
  • 7" stem (working length = 6 1/8")
DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

  • Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
  • Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.
    • .......more details
Installation Manual
MK00488-NM

Micanan Electronic Circuit Board Non-Monitored

  • Replacement board for PRO-LH (50-11)
  • Board does NOT have terminals P1 & P2
  • Up to 20 transmitters can be programmed
Instructions Manual
MH00001

Micanan Bronze T-Bushing 3/8" ID

  • 2 required per operator
K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Installation Manual
10-1000-10FT

Strip Curtain 10' x 24" Angle Mount - 8" LT PVC - 4" O.L Clear

  • 10 ft wide x 24" high
  • Mounting bar sold separately
37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

  • Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
  • Purple
97-75005

DOT-C2 Reflective Tape 150 ft x 2" W All White

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
4011-6FT

Aluminum Retainer only for Light Brush or Vinyl Insert 6' Long 90 degree ** To extent of Inventory. *** Sold in 12ft Lengths Only

  • For angle application - 90 degree
  • For use with Light Brush or Vinyl Insert.
  • For applications that require both brush and vinyl
GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-06-L

Green Hinge #6 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-01-L

Green Hinge #1 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
COUPLING002

Manaras Disconnect Coupling for MJH ** No Longer Available Sold in Kit only** Use MOUNTSHAFT010 or 010A **

  • If MJH is manufactured prior to 1998 4 x PIN016 are required
  • If MJH is manufactured after 1998 2 x PIN016 are required
  • PIN016 sold separately
IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

  • 1 ft L x 2" H x 3" W
K001A6039

LiftMaster Control Board for LA400

  • Replaces P/N 127A0071C PN 127A0071F
Installation Manual
DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
    • .......more details
Programming InstructionsInstructions de programmationSell SheetWireless System Chart
MB-02102

Micanan Electric Motor Only 3/4HP 230/460V 3PH

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD
3007-0

Elton Telescopic Door Handle / Foot Plate Black

  • For door thickness: 1-3/8" - 2"
  • Black polyethlene
  • Cut-out size: 6-3/8" x 3-5/8"
27-48-400

Extension Spring 8' Door - 400 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 400 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-170

Extension Spring 8' Door - 170 lbs Orange

  • Single - Loop
  • 27" long 48" stretch 170 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-110

Extension Spring 8' Door - 110 lbs White

  • Single - Loop
  • 27" long 48" stretch 110 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G06-SS

Hinge #6 x 12 gauge Stainless Steel **NLA

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G07-SS

Hinge #7 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K77-36541

LiftMaster Antenna

  • For various gate operators
K20-1100C-2TLP

LiftMaster Electric Motor 1 HP 115/230V 1Ph TEFC Logic

ME120-PC

Miller Edge Rigid PVC Mounting Channel Sold per Foot

15-3619

LiftMaster Sprocket 50B19T 1-1/4" x 1/4" 2-SS

BRAKE013

Manaras Band Brake Assembly Kit OSH

Installation Manual
17S

Rolling Steel 2" Flat Stamped Steel Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 17' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

  • The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.
    • .......more details
Installation ManualSell Sheet
MD00009

Micanan Roller Chain #41 45 Pitch Drive with Link

  • Length: 4 ft