Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

  • For 2-wire edges
  • Was previously MWRTA02A now has a new board making installation easier
  • Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
  • This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
  • The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.
K75-18618

LiftMaster Disconnect Kit for Grey SL595

  • Kit includes: Disconnect support bracket Detent plate Disconnect lever Release yoke Bevel and Disconnect shaft
  • Works with SL590 and SL595 Gate operators that are painted Grey
BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

  • Galvanized steel
  • 12 gauge roller carrier and base plate
  • Adjustment of 7/16" minimum to 2-3/16" maximum
  • Good for use with 3" hardware
Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
15-50B40LGH

Sprocket 40 Teeth 1" Bore 1/4" Keyway

AC7

Felco C7 Cable Cutter 3/16" Capacity

  • Tool length: 8"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 7mm / 0.28in
    • .......more details
Data sheet
41C0279

LiftMaster Light Socket for Sec+ 2.0

  • New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
  • Compatible with LiftMaster garage door openers manufactured from 1993 to present.
  • New "insulated" design eliminates interference from CFL bulbs therefore better remote control range
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output relay
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Instruction ManualSell SheetBrochureWireless System Chart
3AG1

Miniature Fast Acting Glass Fuse 1 Amp 250V (5/pkg) - 766120

3-42-2A

Bottom Bracket with Removable Roller Carrier Commercial 3" 1-Hole BB-6 Pair *** To extent of inventory

  • Sold as a pair (1-left and 1-right)
  • 11-guage
  • Dimensions: 4-1/2" W x 11" H x 1-3/8" D
C-200-INSTALLED

Cones 2" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF200
.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.295-2-L

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
25E10002

Truck Door End Hinge & Roller Cover Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Removable cover allows roller change without hinge removal
  • Cross Reference: W #1209 T #70162
  • Box quantity: 50
26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
26-14521

Truck Door Intermediate Panel (11" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-14522

Truck Door Intermediate Panel (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

  • Allows for easy door operation.
  • Seal protects cargo area from dirt and moisture
  • Will not bunch up as bottom panel goes around top curve.
  • Co-extruded using rigid PVC backing with flexible PVC seal against the door.
  • For use with right angle vertical track
  • Fits only right angle vertical track assembly.
    • .......more details
.234-2-R

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
    • .......more details
Programming Instructions
41A7562

LiftMaster Light Lens for 8360 8550 8355

  • Replacement light lens
.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.273-134-R

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
19-10929

LiftMaster Hoist Chain Sold by the Foot

  • and Chain for LiftMaster commercial hoist operators
CB14B0500

Cable 1/4" 7x19 500' Galvanized

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
8FT-I-BEAM

LiftMaster 8' I-Beam Rail 3708CH / CD1008

  • I-Beam Chain Drive Rail for model 3595
8FT-RAIL-CHAIN

LiftMaster 8' chain drive rail 1708LMC - colour code: Blue

  • #48 chain size
  • Price reflects cost if purchased with an opener
7001-16-W/B

Commercial Side & Top Weather-Strip 16' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
ME113-R

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
.319_6"-LH

Torsion Spring .319 x 6" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 6"
  • Length: 12 ft
.363_5-1/4"-LH

Torsion Spring .363 x 5-1/4" x 12ft LH Green/White

  • Wire size: .363
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.343_5-1/4"-LH

Torsion Spring .343 x 5-1/4" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.331_5-1/4"-LH

Torsion Spring .331 x 5-1/4" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.393_3-3/4"-LH

Torsion Spring .393 x 3-3/4" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_3-3/4"-LH

Torsion Spring .273 x 3-3/4" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.319_2-5/8"-LH

Torsion Spring .319 x 2-5/8" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.306_2-5/8"-LH

Torsion Spring .306 x 2-5/8" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.250_2-5/8"-LH

Torsion Spring .250 x 2-5/8" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.234_2-5/8"-LH

Torsion Spring .234 x 2-5/8" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.283_1-3/4"-LH

Torsion Spring .283 x 1-3/4" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.234_1-3/4"-LH

Torsion Spring .234 x 1-3/4" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

  • This innovative monitor lets you check and close the garage door or gate from any room in the house.
  • Green and Red LED lights indicate whether the garage door or gate is open or closed.
  • Volume controlled audible alert lets you know when the garage door or gate is being opened.
  • Able to monitor and close up to four garage doors or gates.
  • Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.
Programming InstructionsInstructions de programmation
LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

  • Caulking gun for LSBLK / LSGRY
41A4252-6G

LiftMaster Circuit Board Assembly ** Discontinued

  • Assembly includes: circuit board end panel and light socket
  • Also includes: 1 Multi-Function wall control panel - 2 wire
  • For chain drive units with two lights
  • Fits 1250 1260 1270 1280 220WD 320WD 5100 7200 & 8100
41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

  • Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003
Installation ManualManuel d'Installation
19-40HL

Half Link #40

  • Half link for #40 chain
  • ANSI Standard Carbon Steel
T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

  • This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833TC (190-109023)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
CAM011

Manaras Limit Cam

  • Limit cam for Mountshaft018A 018B
  • 2 cam's required per shaft
19-41HL

Half Link #41

  • Half link for #41 chain
  • ANSI Standard Carbon Steel
144C56

LiftMaster Idler - Cable Pulley for chain drive

  • For square rail assemblies
  • Same as 144C0056
41K4629

LiftMaster CPS Interface Black Box (CPICARD)

  • Allows CPS-U photoeyes to provide a 'NO' contact
  • Interface is included with CPS & CPS-N4
  • Also known as 041K4629 1C4489 41K4629 41C4489 CPI
.306_6"-RH

Torsion Spring .306 x 6" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.283_6"-RH

Torsion Spring .283 x 6" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 6"
  • Length: 12 ft
.393_5-1/4"-RH

Torsion Spring .393 x 5-1/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.312_5-1/4"-RH

Torsion Spring .312 x 5-1/4" x 12ft RH Yellow

  • Wire size: .312
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.437_3-3/4"-RH

Torsion Spring .437 x 3-3/4" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.421_3-3/4"-RH

Torsion Spring .421 x 3-3/4" x 12ft RH Gold

  • Wire size: .421
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.243_2-5/8"-RH

Torsion Spring .243 x 2-5/8" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.295_2"-RH

Torsion Spring .295 x 2" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 2"
  • Length: 12 ft
.262_2"-RH

Torsion Spring .262 x 2" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
.218_1-3/4"-RH

Torsion Spring .218 x 1-3/4" x 12ft RH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 1-3/4"
  • Length: 12 ft
13-10024

LiftMaster Limit Nut

  • Limit nut / cam for commercial door and gate operators
23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

  • Double limit switch DP DT
  • For LiftMaster and Micanan operators
41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

  • For LiftMaster Chamberlain & Sears openers built from 1993-1998
  • Kit includes: Saftey sensors 24" wire and gel connectors
  • Replacement: 041-0136 with the 041-0155-000 brackets
373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

  • Visor clip and 3V lithium button cell (CR2032) battery included.
  • Same as Chamberlain model 953D
373LMC Manual
T1B-DS

Lynx 1-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Use with receiver (RA-LYNX-RCVR) for open/close on commercial operators
  • Same as model 2211-L (TX)
    • .......more details
Compatibility chart
BK002

Residential Top Bracket Low Headroom Sold Individually

  • Bright zinc plated 10-gauge steel
  • 3/8" roller offset
SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse latched or timed relay output
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Instruction ManualSell SheetWireless System Chart
CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

  • Reversing contactor with 24V coil
  • Same as part # LC2K12107B7
  • Demensions: 3.5" long x 2.25" wide x 2.25" high
  • Use 03-8024K as possible replacement
MOUNTSHAFT014

Manaras Clutch Shaft Kit for Opera-H (OPH)

  • Input / clutch shaft kit for Manaras Opera-H
Drawing
TRANSF088

Manaras Transformer 480-24V 40VA

  • Transformer 480V Primary 24V Secondary 40VA
VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

  • Used on MTH/MTBH APE APT models
  • Same as Doorlec 19030
LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

  • Fits old medium-duty Manaras operators such as MDJ
  • SPDT - Cherry
Limit Switch Chart
TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

  • This timer-to-close can be added to any Commercial garage door opener.
  • Use with RELAY022 (8-pin base) if required.
  • Schneider Elect. part no. RE88867215
Adding a timer
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

  • Open/Close/Stop remote for 4 doors.
  • By selecting A B C or D on the rotary switch you can operate any of the four doors.
  • Comes with LED battery life indicator.
  • 9V battery included.
  • Can be wall or post mounted.
  • Must be used with 4 MCR series receivers.
    • .......more details
Programming Instructions
AP5

Linear MegaCode Wireless Access Controller 318 MHz

  • Ideal for gated communities parking facilities and industrial sites
  • Easy to set-up and use up to 480 remotes can be programmed with a few keystrokes
  • Easy to add suspend and delete transmitters through programming mode no transmitter dipswitches to set
  • Supports 480 block coded transmitters or 238 individual transmitters/wireless keypad entry codes
  • Supports up to six fully supervised safety edge transmitters
  • AP-5 replaces Linear's AP-4; AP-5 available for replacement of existing AP-4 units only
    • .......more details
Programming Instructions
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

  • Three channels - three relay outputs
  • Textured aluminum case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC
    • .......more details
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
217436

Linear Drive Sprocket - Chain (HCT)

4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.