Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-H-7523-U-RH

Micanan 3/4HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5053-E-RH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

PRO-H-5043-U-RH

Micanan 1/2HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

K72-19974-RB

LiftMaster Output Shaft & Sprocket

Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers

K71-D3PH

LiftMaster Drum Brake Kit 3 Ph 208/230/460V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

PRO-J-10043-U-RH

Micanan 1HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-10043-U-LH

Micanan 1HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-10023-U-RH

Micanan 1HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

MG-00127

Micanan Plastic Spacer for Boards (Short Length 0.382)

MK-00017

Micanan Ground Lug

MK-00052

Micanan Overload Reset 3-Phase 5.5 - 8.0 Amps

MV-00028

Micanan 24V Commercial Receiver NEMA-4 CR32E-24V

MM-00327

Micanan L-Bracket Right Angle Front of Coil For Rolling Steel Doors

MK-00058

Micanan Dual Timer 24V Module APT

MV-00022

Micanan Pull Cord SPST Nema 7/9

MV-00239

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 1 Flush Mount

MV-00304

Micanan Wireless Key Switch

MV-00012

Micanan 3-btn O/C/S w/Key Lock-Out Metal Housing Nema-4 Pushbutton Control Station

Surface mount
Metal Housing

MV-00009

Micanan 3-btn O/C/S Nema-4 Pushbutton Control Station

Surface mount
Plastic Housing

MP00226

Micanan Track and #41 Waterproof Chain for 10' h Door

For 3/4 & 1 HP Micanan trolley operators

PHOTO-008E1

Manaras Non-Monitored Photoelectric Cells Nema 1 5-45' Range

Thru-Beam type

.406-514-R

Cut-to-Length Torsion Spring .406 x 5-1/4" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.363-514-R

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-J-7543-U-RH

Micanan 3/4HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-LJ-5021-U

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Universal Mount

On-Board receiver holds up to 20 transmitters

PRO-LJ-5011-U

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Universal Mount

On-Board receiver holds up to 20 transmitters

PRO-GT-10043-U

Micanan 1HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5023-U

Micanan 1/2HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-5011-U

Micanan 1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-APTB-7543-U

Micanan 3/4HP 460V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-T-5043-U

Micanan 1/2HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

60-7243

Standard Caution Sign English 12" x 24"

60-7248-81111

Wheel Chock Safety Pkg incl'd: orange urethane chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 811-11 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Not For Use on Ice
High Visibility
Orange Urethane
Size: 11" wide x 8" long x 8" high

SC-6

Wheel Chock SC-6 Aluminum *** No Longer Available

Excellent Surface Grip on Tire and Ground
Lightweight Aluminum
Size: 6" wide x 6-1/2" long x 6" high

68-9U

Wheel Chock 68-9U Pyramid Rubber with U Handle

Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

CBI-29

Wheel Chock CBI-29 Cast Ductile Iron

Made from Cast Ductile Iron for Impressive Strength
Painted Blue for good Visibility
Completely Reversible for Simple Use
Size: 8" wide x 12" long x 9" high

RELAY043

Manaras Relay 4-Pole 24VAC

Used on Manaras MLJ MLH MLT Models

MOTOR271

Manaras Electric Motor1/2HP 208/460V 3PH

This item is compatible with BRAKE011

27122

Doorlec Electric Motor 1/3HP 208/480/575V 3PH DC321

D4-120

Extruded Bumper Black 120" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Sold in 10' Lengths and cut to measure
Includes 10' Metal Washer Insert
Comes with 5 Holes for mounting or none - Please Specify When Ordering Bumper

HRB-8

High Riser Bracket for 7" Above Dock or Higher 8"

High Riser 8" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

15480

Doorlec Heater Strip 175 W 575 V

SPECPARTEL001

Manaras 3-btn Push-Button Control Station with Pilot Light Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.

LB912-36

Laminated Bumper Standard Black 12" x 36" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB910-36

Laminated Bumper Standard Black 10" x 36" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB810-36

Laminated Bumper Standard Black 10" x 36" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-36SF

Steel Faced Laminated Bumper Black 12" x 36" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB636-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LLB620-22

Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.
This model has angles on both sides

.......more details

LB612-12

Laminated Bumper Standard Black 12" x 12" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB430-11

Laminated Bumper Black 4" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB410-24

Laminated Bumper Standard Black 10" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

MK-00546

Micanan Heater Probe in Reducer Mod. (24V 20W 3/8" NPT)

34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

MK-00229

Micanan Transformer 575V-24V-50VA Not Fingersafe

HINGE-311-PCG

Powdercoated Hinge #3 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #3 - 0.73 lbs
Powdercoated Grey
For use with 7/16" stem rollers

8-11-1

Strut Clip Sold individually

Hole diameter: 0.260"

MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

MOD027B

Manaras Auxiliary Output Module Modification

MX-00151

Micanan Complete Hoist Shaft Assembly for PRO-GH Includes Pocket Wheel

Includes: pocket wheel shaft bevel gear chain guide spring collars spring pin and washers

TRACK-SET-2

2" Tracks Set with Wall Brackets Special Order

Custom order to customer's needs
Set includes the vertical and horizontal tracks and wall clips for either wood or steel.
Must spcify if the door has torsion or extension springs if the tracks are going on a wood jam or steel desired radius and thickness of door

R4022

Linear GTO Battery and Transformer

Base station not included

2376.171_25.930

Whiting Torsion assembly .171 wire size 25" spring length 93" shaft

44-60-220

Extension Spring 10' Door - 220 lbs *** By Quote Only

Clipped ends
44" long 60" stretch 220 lb load

41C5548

LiftMaster Wiring Harness Kit Low Voltage

For use with various LiftMaster® and Chamberlain® Garage Door Openers

BI-004

Astragal Bottom Cloth Black PVC Sold by the Foot

.393-514-R

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

82424

Marantec Power Board for RV- 8000 & LC-1000 Models

WEL-200-T

EMX Wireless Edge Link Transmitter Unit only

Addition transmitter unit for multiple setup

Manual

PRO-GHC-10021U-L

Micanan 1 HP 230V 1P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

Installation manual Specification sheet

OCDFX4

Overhead Door 4-Btn Transmitter 315/390 Mhz *** No Longer Available

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX4.S GIDFX4.S

BLSI12-PM39X

Pivin Drapeau Spring Assembly for BLS12

MG020-Y-2E-03

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 3 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

MK00800

Micanan KBVF-24D Frequency Drive 1 HP 110/230V

When 230V is required remove the black jumper

MD-00516

Micanan Roller Chain #40 Waterproof 10' Pack

7001-9-BRONZE

Commercial Side & Top Weather-Strip 9' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

7001-8-BRONZE

Commercial Side & Top Weather-Strip 8' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

47DCT

LiftMaster Receiver Logic Board Sec+2.0 Non-MyQ

047DCT is a replacement Security+ 2.0® receiver logic board.
This replacement board does not feature MyQ® technology.
This 315MHz receiver logic board is compatible with various LiftMaster® AC chain drive and belt drive garage door openers; made after 2011.
The unit will feature a yellow learn button.
Same as 47DCCR1 47DCCC1 47DCCL1 047DCT41D8060 1D8060

MD-00137

Micanan Roller Chain Waterproof #41 10' Pack

029C98205

W-Style Complete Replacement Door White Stainless Steel Pkg 029C98205

Manufactured to exact size fully assembled tracking and spring assembly included.
98" w x 105" h
Price varies according to size

5001-18-DK-BROWN

Residential Side & Top Weather-Strip 18' Long Commercial Brown

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

MD-00173

Sprocket 50B60 x 1-1/2" 3/8" KW 2SS 5/16"

OES-5104

LiftMaster 2" x 2" PVC Channel 16ft

Connects the door to the edge kit. 16' total (sectional doors only).

26CW94625-CUT

Truck Door Top Panel w/o Hardware (15" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

MB-05507

Micanan Electric Motor Only 1 HP 230/460V 3PH Base Mount TEFC FR56

CA-104-412

Continuous Angle 1-1/2" x 4-1/2" x 104" L Sold per Piece

MU22-4WIRE-E-Y

Miller Edge MU22 4-Wire End Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty