Devanco Canada - Get The Right Garage Door Opener‎ and Parts

27028

Doorlec Electric Motor 3/4HP 115/230V DC403C

Bolts to gearhead (c-flange) openers

Wiring diagram for 120V Wiring diagram for 230V

ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 559
Reverse side is #431 Bright White

Colour chart

CP-LX720

Lynx 3-btn O/C/S Transmitter 372 MHz for Commercial Op. with UL325 Board

UL325
Works on the new Lynx commercial operators
Open Close Stop transmitter
Not compatible with the 372MHz residential operators.

Programming instructions Compatibility chart

MWR12

Miller Edge 1-Channel Receiver RF 318 MHz *** To Extent of Inventory

��The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
Power requirements: 10 to 40 VDC 10-30 VAC
Output: dry relay contact N/O and N/C 1A @60VAC
Operating temperature: -40C to 60C
Maximum operating distance: 100ft
Electrical configuration: optional N/O or N/C

.......more details

Installation Manual Sell Sheet

CPS-OPEN4

LiftMaster Monitored Dual-Sided Photo Eyes

For use with sectional or rolling doors.
May be installed in areas exposed to rain or moisture
Rubberized for more durability
Will work on LiftMaster residential operators

Installation Manual Manuel d'Installation Sell Sheet

T-833-C-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025-311 MHz****NLA

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

1A3982

LiftMaster Operator Splash-Proof Cover

For models: MH H HCT GH
For wall mounted operators 31" L x 19" W x 18" D assembly required.

Installation manual

41A5021-9G-315

LiftMaster Circuit Board Assembly

Board: Security+ 315 MHz
Aeesmbly includes: circuit board and end panel
Also includes 1 Multi-Function wall ctrl panel - 2 wire
For ATS2113X model
For older ATS operators use replacement board 41A5021-1ATS

485LMC

LiftMaster Battery for Integrated BBU Units

For use in Liftmaster 8550 8500W 3850 and 8360 models
12V 4.5 AMP
Same as Part # 41A6357-1 41A5948
Battery back-up good for 20 cycles

Installation Manual Manuel d'Installation

8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

Open/Close remote for 9 doors
Compatible Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door trio to operate
Power: 9-volt battery

.......more details

Programming Instructions

25-10402

Truck Door Pull Strap (15.5") with Zinc Retainer for Roll-Up Doors

Durable 2" wide black nylon construction for added strength and durability.
Custom lengths available
Cross Reference: 257000

CBG24DCGMC

LiftMaster Techna Commercial DC Barrier Gate Operator White Cabinet

24VDC barrier gate operator with battery backup
Continuous-duty motor with soft start/stop
Exceptional starting torque and continuous operation
Heavy-duty motor supports 6000 cycles per day
Operator speed of 2.5 seconds to open or close
Aluminum alloy chassis

.......more details

Installation Manual SellSheet Data Sheet Wiring Diagram Quick Start Guide

D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

Power Supply: 12-24 Volts AC/DC
Current Consumption: < 9 mA
Operating Temp: -40°F to 180°F
Surge Protection: Zener Diode /MOV
Output Relays (2): 1Amp 30 VDC
Loop Input: Transformer isolation lightning and transient protection (1)

.......more details

Manual - LP-D-TEK Spec Sheet - LP-D-TEK

MA010

LiftMaster Gate Arm Bracket

Designed for use on all Mega Arm gate openers
Bracket will work with either right-hand or left-hand operation gate arm.

4580-304-BLACK

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Black *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

SL595103UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325 ***NLA

UL 325 compliant system.
Power: 208/230/460/575 VAC. 3 Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.

.......more details

E/1929/235

Automatic Systems Axis 1.5" Ass'y w Bearings(BL229)

Used on the BL229 gate op.
Main pivoting shaft

36045A

Genie Helical Gear 2040L

Helical gear assembly for the Genie #2040L garage door opener.
Same as: 36045AS 36045. 36045A 36045S
Includes: Helical and limit gear screws clips and small tube of grease.

Z9202

E-Z Ratch Kit Torsion Spring Winding System ** No Longer Available

Kit includes:
Two (2) - 21" Extendable Ratchet Handles (extend to a full 30" in length)
All-purpose commercial cone Gear Adapter (double-ended)
Six (6) Cone Adapter Pins One (1) 7/16" One (1) 1/2" Two (2) 5/8" Two (2) 3/4"
Mounting arm spacing allows it to be coupled to spring cone sizes up to 4 3/4" diameter
Compatible with 1” main torsion bar installations

.......more details

Operating instructions

MA026

LiftMaster Pad Only Yellow For 12' Arm

Pad only - arm not included

CAPCELL

LiftMaster Cellular 4G/LTE Modem with Wifi

Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
Sign up with your preferred carrier or add on to your current plan.
Avoid trenching and wire pulling for speedy installations.
Eliminate plain old telephone service (POTS) and improve reliability.
Compatibility: At&t® Verizon® T-mobile® Bell® Rogers™ Telus®
Capacity: Connect up to 4 wired or multiple Wi-Fi devices

.......more details

38123A

Genie Powerhead Mounting Flange

Mounting bracket connects the powerhead to the rail assembly.
A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
Fits TriloG PowerLift GPower and PowerMax Operators

LIMIT023

Manaras Single Limit Switch with 46 degree Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

RVH-6114-ECB-RH

Manaras Rapido Jackshaft Op.1 HP 120V 1 Ph ECB No Eyes Right Hand

The RapidoTM RVH is a high-speed heavy-duty V-belt drive industrial operator designed for use on vinyl rolling doors as well as rolling bug screens.
RVH offers an opening speed up to 30”/sec while smoothly managing Soft-Starts and Soft-Stops therefore reducing the wear and tear of the complete door system.
#41 or #50 roller chain with sprockets selected for an optomized door opening time.
Electrically activated drum-band type solenoid brake.
All electrical components are in a Nema 1 enclosure. Hinged electrical enclosure cover
6-digit electro-mechanical counter mounted inside the control box counts each complete door cycle providing valuable data for maintenance scheduling.

.......more details

37558R

Genie Belt Drive Sprocket Assembly

Complete assembly for the belt sprocket on top of the machine.
Works with the following models: IntelliG 1200 and IntelliG 1000

CPS3-N4

LiftMaster Option Card with CPS-UN4 Eyes for applications requiring 2 sets of photocells

For applications requiring two sets of photoeyes in a damp location
Range up to 45ft water dust and corrosion proof eyes (Nema 4x rating)
Works with Logic 3 4 5 Commercial Operators
Includes Durable steel brackets - floor or track mounting
Kit Inludes one set of CPS-UN4 and one CPS3 card ( CPSIII )

69C

Skylink 1-Button Universal Keychain Remote *** NLA

It's small enough to carry in your pocket or purse
The 69C is a great universal remote and it is compatible with almost any garage door up to 2007 (see compatibility chart for exact brand names).
It has just one simple button and a unique keychain attachment which makes it ideal for use with convertibles motorcycles bicycles or any other vehicle without the usual sun visor.
It connects to your garage door using a series of DIP switches making it simple to program it even if your garage door dates as far back as the 1980s.
Model 69c is not compatible with Stanley "Securecode"
Compatible frequency: 390/318/315/310 Mhz

.......more details

Compatibility Chart

BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

With C16-32F bearing
Galvanized steel
3-3/8" shaft offset
Flange allows plate to be bolted to the wall for additional support
Same as part number 209

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

41AC050-1M

LiftMaster Electronic Circuit Board Assembly

Assembly includes: circuit board end panel and light socket
For chain drive units with one light
Fits 3245 & 3255
Also known as 41AC050-1 041AC050-1M

CHAIN036

Manaras Jackshaft Drive Chain #60 - 1R10'

Includes 1 chain link

1086090001.S

Overhead Drive Gear for Overhead 556

White plastic gear only for Overhead model 556

L991S

LiftMaster 1-btn Standard Visor Remote Control Sec+ 3.0

Compatible with LiftMaster® Security+ 3.0™ garage door openers.
Up to 1300 ft. range (conditions permitting).
New and improved seamless set up.
Control one Security+ 3.0 garage door opener.
NEW! Set up and manage your remote in the myQ app for a more personalized experience.
Ultra-secure encryption.

.......more details

Installation Manual Manual d'installation Compatibility Chart 2025 Comparison Chart 2025

PHOTO-065

Manaras Monitored Photoelectric Cells N4X Retro-Reflective 5-50' Range

Monitored NEMA 4X enclosure retro-reflective type photocell
2-Wire
Suited for harsh environments
Range: 5-50 ft

Manual

BCSI-PM504

Pivin Drapeau Limit Shaft Kit BCSI Gate Operator ** Price by Quote Only

Includes: Switch Shaft Bearing Plate

27035

Doorlec Elect Motor 1 HP 208V 1 Phase base mount TEFC

For V-belt and worm gear reducer driven models

17350

Doorlec Cable 5ft with Antenna

D-67

Linear 1-Channel Digital Receiver 303 MHz

Designed for use in security systems and remote switching functions.
Typical applications for the receiver include adding a wireless zone a panic button or creating a remote arm/disarm feature for a hardwired alarm panel
Operates on 11-24 VDC or 12-16 VAC power
One channel
Standard digital format: 256 discrete codes
One form “C” relay output

.......more details

RB709U-NB

Linear GTO Garage Door Receiver Adapter Mighty Mule

The RB709 Garage Door Opener Adapter enables the Mighty Mule transmitters to open and close almost any garage door opener
Made to be used with the FM134 (two button) and the RB743 (three button) remote control transmitters or F310 Keypad
Easy to install with almost any garage door opener
One RB709 is needed for each garage door opener that will be controlled by the Mighty Mule transmitters

BCSI-BM-31

Disconnect Lever Industrial Slide Gate Operator ** Please use BCSI-PM31

SPRAY-265

Aluminum Touch Up Spray Paint Antique Brown / Brun Antique #265/165 *** To Extent of Inventory

140g

50-ALMARM-DOT

LiftMaster 15 ft Aluminum Barrier Arm Square White Aluminum with Red/White Retro-Reflective DOT Tape

Used on BG770
Arm adaptor included
15' x 2.5" square arm
Replaces 50ALUMARM

ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

Features a slim design that is compatible with most gate operators that require a dry contact relay input.
No harness required; comes with terminal screw adaptor
ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
Frequency count/reset switch
10 sensitivity settings
Loop diagnostics

.......more details

12123

Doorlec Coupling 1-3/4" x 5/8" bore 4 Pin coupler

Used on model LJH

19863R

Genie Clip and Collar Rail Connectors

For Genie screw drive units having split rails use a collar and spring clip to join the 3-piece screw.
Complete collar and clip set for one 3-piece rail.
Compatible with all screw drive Genie garage door openers
Set of 2 clips and 2 collars
Same as 19806A04 and 19807A04

41DJ001A-390

LiftMaster Receiver Logic Board with Plate 390MHz *** No Longer Available

12-10882

LiftMaster Copper Bushing

3/4" x 1" x 5/8"

LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

For use with D-TEK detectors (most commonly used)
Hourglass shaped

VBELTB29

Manaras VBelt 5L 29" Type B (5L320)

For models OPJ OHJ OPH & OSH
Same as 5L320

312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

External 8" coaxial antenna included
Security+ rolling code technology and/or Dip switch compatibility
12 VDC or 18-35 VAC/DC jumper selectable
Momentary or constant contact selectable
For replacement antenna use 41C3196
Accepts up to 31 remote control codes on Normal Security setting

.......more details

Programming Instructions Instructions de programmation

T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
3-buttons provides control for 3 Lynx operators
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Will work with Lynx residential operators built from 2000 and up.

.......more details

Compatibility chart

S2TR2641E2

Erone 2-Channel Mini Transmitter 433MHz

Open/Close remote for 2 doors
Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
Learn button programming
Ergonomic stylish design Rugged & durable
Light grey base with yellow buttons
unobstructed range: 820 ft (250m)

.......more details

Sell Sheet Brochure Wireless System Chart

26-40001

Truck Door Bottom Seal Standard 98" Long for Todco Roll-Up Doors

Extruded from long lasting rubber
Prevents dirt and moisture from entering cargo bay.
Cross Reference: T #80840 W #3257 610200

K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

Formerly 76-G0541 G76G0541
For SW470 with GL or S3 Board SW490 with GL Board

EP2983-BLACK

Exhaust Port 4" non latching long barrel Black Nylon

Inside diameter: 4"
Outide diameter: 4-3/8"
Sleeve: 2" (non latching)
Flange: 6"
Includes fasteners
Black Nylon

.......more details

MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

The transmitter comes standard with a NEMA 4 weather-proof enclosure
Compact design that allow for easy troubleshooting.
The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
Power Source: (2) 1.5 volts AA lithium batteries
Input: 2-wire N.O. sensing edge

.......more details

Installation manual Spec sheet

LA412DC

LiftMaster replacement 12VDC Solar Actuator Arm

he LA412 Arm runs on 12V and connot be subbed for LA400 Arm

26124

Doorlec Clutch Shaft 11-3/4" x 5/8" LJH

Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size

821LMB-SENSOR

LiftMaster Extra Door Sensor for 821LMB Second Generation *** To Extent Of Inventory

This add-on door sensor works with the MyQ Smart Garage Hub to monitor and control a second garage door opener.
This version of the MyQ door sensor is only compatible with the new MyQ Smart Garage Hub by LiftMaster Model 821LMB.
Installation and Programming is easy: Mount to inside top panel of garage door and add to an existing MyQ account through the MyQ app
Not compatible with MyQ Garage (821LM)

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels are routed and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.

.......more details

MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

Used on PRO-GHC
4 required per operator

A8833-PB

Allstar Replacement Square Push Button Only White Sold Individually

Square white button fits Allstar remotes # 8833 8833TC 8833T-OCS

LAGS141W

Fasteners Lag Screw Stainless Steel 1/4" x 1" Hex Washer Head 3/8" Sold Individually

PRO-GH-5011U-R

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-HHD-7511E-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft NM ECB No Eyes Left Hand

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation

.......more details

Installation manual Specification sheet

LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

IRB-RET

EMX Industries Universal Retroreflective Photoeye Nema 4X New UL325-2016 *** To extent of Inventory

Type B1 non-contact sensor
UL 325-2016 compliant
Operating range up to 60 ft. (18.3 m)
NEMA 4X enclosure
Sensitivity adjustment: potentiomete
Mounting bracket and reflector provided

.......more details

Installation manual Sell sheet

OTBH-6232-APT-C

Manaras Trolley Operator 1/2 HP 208V 3 Ph Apartment Model with Contactor

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
30 cycles per hour up to 100 cycles per day
APT model incorporates pillow block bearings on input shaft
A 4L/A v-belt

.......more details

Installation manual Sell sheet

DXR-702

Linear 2-Channel Digital Receiver 315 MHz *** Discontinued

A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
The relay has four optional output configurations.
32 transmitter capacity
RF activity indicator
Quick-learn programming

.......more details

Installation Manual

165-A

Fusible Link For Loads 1 to 30 lbs

Length is 2.625" width is .875"
Distance between centers is 1.75"
Priced per each
Fire rated at 165 degrees Fahrenheit

MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

Pro-H requires 3 of these bearings

F539.90000

Bircher Infrared Programming Remote RC Duo 2 Red

Conveniently program all parameters from ground level
Backlighting of specific buttons provide instant confirmation of programmed parameter & value
Configure any Hercules 2 Hercules 2s Reflex 2 or UniScan sensor with the same remote
Multiple address feature allows programming of a single sensor even in close proximity to other sensors
Large highly visible buttons
Automatic off feature conserves battery life

.......more details

Programming Instructions F539.90000 Sell Sheet

109020

Linear 1-Channel Multi-Code Receiver 300 MHz

Three tabs for universal mounting
One "NO" relay
Compatible with 10 dip- swith 300 MHz Multi-code transmitters
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

877MAX

LiftMaster Sec+ 2.0 Keyless Entry with Universal compatibility (MAX) ***No Longer Available

Security+2.0™ rolling code technology assures a new code is sent every time the keypad is used
Temporary password option enables visitors or delivery and service personnel to enter the garage without giving them your personal code Completely wireless – powered by one 9-volt battery (included)
Weatherproof flip-up protective cover Backlit keypad makes numbers easy to see even in the dark
One-button-to-close feature makes it easier than ever to close your garage door (works with all LiftMaster® garage door openers manufactured since 2006)
Programs in 2 easy steps
Compatible with LiftMaster® Security+2.0™ garage door openers

.......more details

877MAX Manual

STATION078

Manaras 3-btn Push-Button Control Station Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.

Sell sheet

25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #2996 T #70224

02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

Swivel end
Nema 1
Same as Pull Cord

27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

Zinc die cast construction.
Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
Cross Reference: W #2518
2-3/16" I.D.

17335

Doorlec DC-3100T 4-btn O/C/S Compact Transmitter 301 MHz

3 buttons for O/C/S and 1 button for turning lights ON/OFF
Includes 12V battery
Dimensions: 3-1/4" l x 1.5" w x 1/2" thick

L932M

LiftMaster 2-btn Keychain Remote Control MAX Security+ 3.0

Compatible with Chamberlain® LiftMaster® and most Craftsman® garage door openers manufactured after 1997 with safety sensors.
Up to 1300 ft. range (conditions permitting).
New and improved seamless set up.
Control up to 2 garage doors or gates.
NEW! Set up and manage your remote in the myQ app.*
Ultra-secure encryption.

.......more details

Installation Manual Manual d'installation Compatibility Chart 2025 Comparison Chart 2025

GALV-331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
Soft-Starts and Soft-Stops
Electrically activated drum-band type solenoid brake
Ceiling-mounted with 8.69" headroom clearance required below the tracks
Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
Tracks sold separately

.......more details

SSZP16-6

Solid Shaft 1" Keyed Zinc Plated 16'-6" (198")

4580-304-BRONZE

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Bronze (Commercial Brown) 458-47 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

TTC-MODULE

Timer to Close Plug & Play Module

Adjust door closing times from 1 second to 5 minutes
Adjust pre-closing warning times from 2 to 5 seconds
Easy-to use "Plug and Play" connector
Make adjustments using the module's LCD display
Requires installation of monitored entrapment device
111114.500307

.......more details

K75-39337

LiftMaster Trolley Nut Kit LA500

The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

Replacement instructions Instructions de remplacement

LMWETXU

LiftMaster Wireless Edge Transmitter Monitored

Connects to wireless edge receiver using low-energy Bluetooth transmission
Sensing distance up to 130 ft
Transmitter accepts up to 2 wired resistive edges
Battery life 2 years
NEMA 4X rated
Compatible with LMWEKITU Wireless Edge Kit and L50 and S50 Monitored Resistive Edges

.......more details

Installation manual Manuel d'installation Product Guide Guide de produit

SPRAY-5P6

Aluminum Touch Up Spray Paint 350g Iron Ore / Minerai de Fer #5P6

140g

172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

Wall mounting
4:1 reduction
Maximum pull allowed on hand chain is 35lb
Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch

Sell sheet

CAPXL

LiftMaster Connected Access Portal High Capacity

Connected Access Portal High Capacity Cloud-based access control for residential communities.
Capacities: 4 Controlled Gates/Doors
Wireless Link for up to 8 LiftMaster® Operators
4 to 8 Digit Entry Codes
4 to 6 Digit Directory Codes
50000 Local Resident Capacity

.......more details

WRW

Erone Wiegand Wireless Receiver 433MHz

433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability.
KeeLoq® Rolling Code technology ensure ultra-secure transactions.
Output: Wiegand 26 bit
Power requirements: 12 or 24V (AC or DC)
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
Compatible with Centaur and any 26 bit Wiegand-capable systems

.......more details

Wireless System Chart

STRUT-3-18'

Door Strut 3" Hemmed 18ft Long

Reinforcement bar 3"

MCB-421-CONT

Lynx Heavy-Duty Chain Drive Trolley 3/4 HP 220V 1P Contactor Model

Heavy-Duty spur gear chain drive trolley

BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
Barrier equipped with control unit allowing operation perfectly adapted to every situation
Change of configuration or operation possible even after initial installation of the product

Bilingual parts catalogue Technical manual

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

SPST
2 mounting holes
Dimensions: 2.375 x 0.875 x 0.75 inches
Color: Light Gray
Intended for indoor use

3BXLT

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic

Double pole contacts
Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
Comes with 2 keys
H=7" W=2-3/4" D=2-3/4"

3BXT

MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

Exterior Through-Beam Photocell
Sensing Distance 45 Feet
UL325/2010 Recognized Component
Comes with Sender Receiver and Brackets
NEMA 4 & 4X

Installation manual

MEA2

Nice Key Unlock System for Older Metro Gate Op.

For underground gate operator
(1) MEA2 KEY UNLOCK SYSTEM (2) KEYS- METROPLEX & BIG METRO
Does not work on the newer systems. For newer Big Metro use BMA3 lever type release

MALED12

LiftMaster LED Barrier Arm 12 ft

The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
Ideal for use with the Mega Arm and Mega Arm Tower

17S

Rolling Steel 2" Flat Stamped Steel Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login