Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K001C8103-1

LiftMaster L5 Antenna

K72-12515-1

LiftMaster Limit Switch Kit

  • For models T H Logic 5 and various L3 L4 commercial operators
  • Also known as: K75-12515-1 K75-12514
41A3150

LiftMaster Terminal Block with Screws

  • For model 8355
  • Same as 041A3150
41C168

LiftMaster Transformer

  • For model 8500
  • 120V / 150 VA
  • 24VDC output voltage
  • Also known as 41C0168 041C0168
7001-16-CREAM

Commercial Side & Top Weather-Strip 16' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
7001-16-SANDSTN

Commercial Side & Top Weather-Strip 16' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (10)
IS-3

Interlock Switch for Rolling Steel Doors / Grills

  • Prevents the control of the operator when the door is locked.
  • The switch is a normally closed contact which is connected to the operator interlock terminal.
MOFR-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Receiver

  • Maximum sensing range is 20 meters
  • 11-Pin
  • 8 inch optical beam angle.
  • Waterproof for harsh environments i.e. water dust steam etc.
  • To be used with amplifier series S142
  • Supplied with 15 m of shielded cable.
    • .......more details
Installation Manual
41AC075-2

LiftMaster Circuit Board Assembly for Dual Capacitor Models 315Mhz ** To extent of inventory

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
  • Also known as 41AB075-2 41AC075-2 041AC075-2A
AIRSWITCH007

Manaras Exterior Adjustable Air Switch SPDT

  • To be used with metal case part # AIRSWITCH008
SPR41B60X1

Sprocket 41B60 for a 1" Shaft

K72-19979

LiftMaster Clutch Shaft Kit 2005 +

  • Assembly includes: Clutch shaft keyed flange bearing dual sprocket 32/14 14-tooth sprocket E-ring compression sprocket chain wheel assembly pulley assembly chain guide assembly shim & thrust washers copper bushing 12-10882 and roll pins
27-20100

Truck Door T-Style Spring Assembly 60" Long

  • Wire thickness: .24"
  • Inside diameter: 1.75"
  • Includes bolt plug and winding plug wound onto spring for stronger design
  • Cross reference: T#51042 W#2701
27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
41A7619-5

LiftMaster Cover for 8355

12-000I

Secure Brands Keypad with Intercom Post Mount

  • Post mount with Intercom
  • RemotePro KP 26 bit wiegand output keypads
  • Available in three different mounting configurations: post single gang or flush.
  • All single gang RemotePro KP models are available with a silver aluminum faceplate.
  • A heavy duty metal keypad is used with all exterior models providing years of trouble free entry.
  • Post mount models feature a stainless steel faceplate in a heavy metal powder coated enclosure with nightlight.
    • .......more details
EL25N

LiftMaster Telephone Entry System Nickel

  • Capable of accepting up to 2000 codes
  • 4 assignable and programmable built-in relays
  • Mounting versatility and available in 3 colors: Gray Nickel or Silver
Installation ManualSell Sheet
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation
41A5624-8

LiftMaster DC Passpoint Assembly

  • Travel Module for 3850
1005-1-1/2-8'

Aluminum Bottom Retainer U-Shaped 8' Long

  • For door thickness 1-1/2"
22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

  • Steel construction Zinc plated
  • Cross ref: Eberhard 4300
11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

  • Used on slide gate operators using #50 chain.
  • Also referred to as adjuster bolts
029-98290

W-Style Replacement Door White Stainless Steel Package 029-98290

  • Replacement door size between 96-1/4" - 98" wide x 72-90" high
  • Painted white
  • Stainless steel package
19-50ML-NP

Master Link #50 Nickel Plated

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

  • For 2-wire edges
  • Was previously MWRTA02A now has a new board making installation easier
  • Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
  • This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
  • The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.
Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

  • Same as part number K75-50097
02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

  • Code on key is #301
MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

  • MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
  • It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
  • Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
  • Features Include:
  • Internal antenna
  • 1-6 digit PIN for each user
    • .......more details
Installation Manual
85LMC

LiftMaster Plug-In Power Supply

  • Plug-in jack for easy installation on Liftmaster receivers
  • Power input level: 105-135AC 24AC output
41C0279

LiftMaster Light Socket for Sec+ 2.0

  • New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
  • Compatible with LiftMaster garage door openers manufactured from 1993 to present.
  • New "insulated" design eliminates interference from CFL bulbs therefore better remote control range
MH00099

Micanan Bearing

  • Fits PRO-APT and PRO-HHD
  • Requires 2 per shaft
  • 3/4" Bore
.225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.295-2-L

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
CABLE_1/8-SS

Cable 1/8" 7x19 1000' Stainless Steel ** Price on request

ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
41A5021-9G-315

LiftMaster Circuit Board Assembly

  • Board: Security+ 315 MHz
  • Aeesmbly includes: circuit board and end panel
  • Also includes 1 Multi-Function wall ctrl panel - 2 wire
  • For ATS2113X model
  • For older ATS operators use replacement board 41A5021-1ATS
7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up tp 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
    • .......more details
CR2450

Maxcell/Renata 3V Lithium Button Cell

ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 6"
  • Length: 12 ft
.468_3-3/4"-LH

Torsion Spring .468 x 3-3/4" x 12ft LH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.375_3-3/4"-LH

Torsion Spring .375 x 3-3/4" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.343_3-3/4"-LH

Torsion Spring .343 x 3-3/4" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.262_3-3/4"-LH

Torsion Spring .262 x 3-3/4" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.207_2-5/8"-LH

Torsion Spring .207 x 2-5/8" x 12ft LH Brown

  • Wire size: .207
  • Inside diameter: 2-5/8"
  • Length: 12 ft
372LMC*

LiftMaster 2-btn Security+ Transmitter 315 MHz ****Discontinued - Replaced by 892LT**

  • Both buttons feature Security+ rolling code technology
  • Compatible with models manufactured from 2005
  • Second button can learn other shared Liftmaster radio-controlled devices.
  • Includes visor clip and Lithium battery CR2032
  • Obsolete as of 9/31/2012 - Replaced by 375LM 892LT or 894LT
41B5669

LiftMaster Belt Clip and Link Kit

  • Used for splicing "New-Syle" belt
41B0139

LiftMaster MVIS Motor Isolators 4/box

24-24-2

LiftMaster Relay 24VAC 8-Pin DPDT

4A1344

LiftMaster Light Socket Plastic (41C279)

19-50HL

Half (Offset) Link #50

  • Half link for #50 chain
  • ANSI Standard Carbon Steel
41AB050-2

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: Logic board end panel and light sockets
  • For belt drive models with 2-lights
  • Also known as 41AB050-2M
.375_5-1/4"-RH

Torsion Spring .375 x 5-1/4" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.468_3-3/4"-RH

Torsion Spring .468 x 3-3/4" x 12ft RH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.406_3-3/4"-RH

Torsion Spring .406 x 3-3/4" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.283_2-5/8"-RH

Torsion Spring .283 x 2-5/8" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.225_2-5/8"-RH

Torsion Spring .225 x 2-5/8" x 12ft RH Orange/Green

  • Wire size: .225
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.234_2"-RH

Torsion Spring .234 x 2" x 12ft RH Blue/White

  • Wire size: .234
  • Inside diameter: 2"
  • Length: 12 ft
.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
19-50ML

Master Link #50

  • For #50 chain
  • ANSI Standard Carbon Steel
TRANSF088

Manaras Transformer 480-24V 40VA

  • Transformer 480V Primary 24V Secondary 40VA
DRUM006

Manaras Steel Brake Drum Flat Track - replaces DRUM001

  • Replaces DRUM001
  • Brake drum for all operators except Gear Head models prior to 1999.
  • Use with BRAKEPART018
RADIO-KIT005

Manaras plug-in receiver for Board 60 or electromechanical operators 390 MHz *** To extent of inventory

  • Direct ECB plug-in receiver card kit (RADIO RE100B) for on-site installation.
  • Maximum 16 transmitters per receiver.
RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

  • Open/Close/Stop remote for 32 doors.
  • By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
  • Comes with LED battery life indicator and 9V battery.
  • Can be wall or post mounted.
  • Must be used with 32 MCR series receivers.
Programming Instructions
8833T-OCS

Allstar 3-btn 1-Door O/C/S Transmitter 109372 318 MHz *** To Extent of Inventory

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
RV-112

1-1/2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
100BL

1" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1701
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1009-1-3/8"

Bottom Nail-On for Wood Door Heavy Duty per foot

  • For 1-3/8" commercial doors.
  • For heavier applications than the 1009-1-3/4".
  • Provides a better cushion.
  • Color: Black
1019-1-3/8-8'

Rigid Vinyl Bottom Retainer Flat 8' Long

  • Black - for door thickness of 1-3/8"
1015-1-3/4-8'

Rigid Vinyl Bottom Retainer Raised Centre 8' Long

  • Black - for door thickness of 1-3/4"
1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

  • For door thickness of 1-5/8" to 1-3/4"
1006-2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/8-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4" • DIE # ES18191
1005-1-1/2-24'

Aluminum Bottom Retainer U-Shaped 24' Long

  • For door thickness 1-1/2"
1003-2-24'

Aluminum Bottom Retainer L-Shaped 24' Long

  • For 2" thick doors.
1003-1-5/8-24'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
  • DIE # ES18010
1104-7FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 7' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-16FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-14FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 14' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

  • Double - Loop
  • 25" long 42" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-120

Extension Spring 7' Door - 120 lbs Green

  • Double - Loop
  • 25" long 42" stretch 120 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

  • Double - Loop
  • 25" long 42" stretch 90 lb load
  • Sold individually
  • Same as part number 109
  • Rated for 10000 cycles
Spec Sheet
28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
27-20500

Truck Door Bearing and Bracket Plate Assembly for Roll-Up Doors

  • Zinc plated finish
  • Bearing with 1" bore pressed in a football style flanged retainer
  • Factory installation assures proper bearing alignment
  • Cross reference: T #51038 W #4033 320000
26-94523

Truck Door Intermediate Panel (13" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

  • Retainer extrusion is constructed of high quality aluminum.
  • Panel mounted retainer
  • Cross Reference: T #69790 500000
26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
25E10051

Truck Door Center Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #15 T #70159
  • Box quantity: 50
Z9005

Shaft Key Straight 3" X 1/4"

  • 3" Straight Key
  • Zinc Plated Steel