Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.243_1-3/4"-RH

Torsion Spring .243 x 1-3/4" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 1-3/4"
  • Length: 12 ft
PRO-LH-5011U-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
LIMIT018

Manaras Double Limit Switch without Lever

  • Double limit switch (DPDT) - Cherry
  • The extra contact is used to control auxiliary equipment
  • Applies to all current operators
Limit Switch Chart
RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 4 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
Programming Instructions - ECBProgramming Instructions - CONT
7470.115

Whiting Side Seal for insulated doors 115" Long

  • Fits Coldsaver and Tempguard
2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

  • Auto voltage sensing - no jumpers to set
  • Single Form â€A†(normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
RV-100

1" Vinyl Insert for Brush Retainer per foot

  • Color: Black
  • Fits in light brush retainers
4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

  • For angle application (45 degree)
  • For use with Heavy Brush
4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4007-16FT

Aluminum Retainer only for Light Brush***Actual Length 16'2" 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4007-8FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
1019-1-3/8-14'

Rigid Vinyl Bottom Retainer Flat 14' Long

  • Black - for door thickness of 1-3/8"
1015-1-3/4-16'

Rigid Vinyl Bottom Retainer Raised Centre 16' Long

  • Black - for door thickness of 1-3/4"
1006-1-3/4-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-1/2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1004-134-24'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 24 ft***Actual Length 24'4"****

  • For door thickness 1-3/4"
  • DIE # ES19244
7001-12-BROWN

Commercial Side & Top Weather-Strip 12' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1104-8FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 8' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-10FT-DK-BR

Residential Side & Top PVC Weather-Strip with cap 10' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1104-8FT-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
7001-18-WHITE

Commercial Side & Top Weather-Strip 18' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1106-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

  • Aluminum retainer with black dual fin vinyl
1106-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

  • Aluminum retainer with black dual fin vinyl
1106-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black dual fin vinyl
1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1001-12-GREY

Commercial Side & Top Weather-Strip 12' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
1001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black dual-fin vinyl
1001-16-GREY

Commercial Side & Top Weather-Strip 16' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

  • Double - Loop
  • 32" long 48" stretch 80 lb load
  • Springs sold individually
32-48-50

Extension Spring 8' Door - 50 lbs Red ** check for availability

  • Double - Loop
  • 32" long 48" stretch 50 lb load
  • Springs sold individually
25-42-70

Extension Spring 7' Door - 70 lbs Orange

  • Double - Loop
  • 25" long 42" stretch 70 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-60

Extension Spring 7' Door - 60 lbs Brown

  • Double - Loop
  • 25" long 42" stretch 60 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
28-02214

Truck Door 2" Vertical Track and Right Angle Assembly 120" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: 101" - 114" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-1
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
27-24401

Truck Door Dual Torsion Spring Assembly 93/33 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 93" Spring Length: 33" Wire diameter: .182 - Winding cone color: Green
27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 98" Spring Length: 60" Wire Size: .243
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
  • Heavy-duty cast aluminum cable drums hold up to 130" of cable
    • .......more details
27-20305

Truck Door Balancer Bracket Center for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2525
26-94325

Truck Door Bottom Panel with Seal (15" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

  • Measures 7" from end to end
  • Measures 5.5" from eyelet to eyelet
26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

  • Steel construction Plain finish
  • Contoured for proper lock engagement
  • Cross Reference: W #2804
25-60050

Truck Door Latch Plate for Todco Roll-Up Doors

  • Steel construction Zinc plated finish
  • Contoured for proper lock engagement
  • Cross Reference: T #70093 W #4021 270700
CBB316

Stop & Sleeve 3/16" 100 pair

  • Includes 100 stops and 100 oval sleeves
CB5320500

Cable 5/32" 7x19 500' Galvanized

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
Comparison charts
RN1324

Roller 2" Nylon 4" stem 13 ball White Sold per Roller

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.71"
  • Box qty: 100 Box weight: 32.2 lbs (2-4-13 White Nylon)
25-10300

Truck Door Cable Anchor Bracket Zinc

  • Steel construction Zinc plated finish
  • Allows proper rotation of cable head
  • Cross Reference: T #61204 W #4004 240000
25-10250

Truck Door Bottom Fixture for Todco Roll-Up Doors

  • Steel construction Zinc plated finish
  • Cross Reference: T #69249 T #61352 W #4003 230000
K20-1050C-2P

LiftMaster Electric Motor 1/2 HP Nema 1

4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
2'6X6PO50

Devanco Loop 2'6 x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
25-01431

Truck Door Stainless Cables 105" 5/16 eye 7x19 Pair for Roll-Up Doors

  • Works with both Whiting and Todco doors
  • Cable size: 1/8 "
2528.096

Whiting Dual-Spring Shaft 96" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes pre-drilled
  • Cross Reference: For Whiting # 2376 balancer
GDI-LG910

GDI Jackshaft & Trolley JDMG-LG-2030 Nerma 1 UL325 Photo Eyes Extra

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
RW-PANEL

Richards Wilcox Replacement Door Panel Special Order

  • As per customer's requirements
.262-2-L-C

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
MA013

LiftMaster Shear Pin #6 (Standard)

  • For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
  • Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear
041-0189-000

LiftMaster Dual Light Pod Kit No Camera Model

  • Dual Light Pod Replacement Kit
  • For use with various LiftMaster® Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology dual light lenses and are not equipped with a video camera; manufactured after 2021 only
  • This replacement kit is compatible with the following models: 84501 84501-267 84602
MK-00030

Micanan Transformer 115V-24V-40VA

28002

Doorlec Flange Bearing F-360-13 5/8" (1.59cm) Hole

  • Fits model LJH/W
635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters
Programming instructionsInstructions de programmation
.375_3-3/4"-RH

Torsion Spring .375 x 3-3/4" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 3-3/4"
  • Length: 12 ft
GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

.312_5-1/4"-LH

Torsion Spring .312 x 5-1/4" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 5-1/4"
  • Length: 12 ft
50690

Doorlec Clutch Assembly for ETBH

MU22-2WIRE-U-GRY

Miller Edge MU22 2-Wire Universal Gray - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
CP-MO-12-115/1

Lynx Electric Motor 1/2 HP 115V 1 Ph *** NLA

  • Electric motor only
MOTOR276-WIRED

Manaras Electric Motor 1HP 575V 3PH Wired for ECB/Brake

RESET010

Manaras Resettable Overload Fuse 13A 1 Phase

65_52091-14

LiftMaster Manual Hoist Mod. M8 #41 Chain for 14ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
Installation Manual
MJ00001

Micanan Brake Shoe - Left **No Longer Available**

  • Only available in complete kit # MJ00013 or MJ00014 for PRO-GH
PIVIN-BCSI

Special Order BCSI Gate Operator ** Price by Quote Only

34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

  • 2-ply
  • Minimum tensile strength of 9800 lbs per inch of width
1003-3"-200FT

Bottom U-Rubber 3" Black 200' Long

  • 200ft spool of vinyl insert.
41D217

41D217

  • Fits model 8550
2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
R5209

Cast Iron Pulley 4" **** Indef Delivery

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Cast iron pulley mounted on two pressed sealed bearings
  • 300lb load rating
71-B575-1

LiftMaster Internal Brake Kit 575V 3PH for L5 Operators

  • Complete with: Brake hub kit Brake release lever Brake disc Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Conduit
  • Can be replaced in-field
Instruction Manual
706111011

Rolling Steel 800 Series Guide Channel Sold per Foot

  • Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.
157371

Decorative Pull Handle Yorktown Style 11-1/4" Stamped Steel Sold per piece

  • Black Stamped Steel
  • Also known as Spade Style
  • Mounting hardware sold separately
  • Priced per each
.319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
2200-938

Linear VBelt 28 4L Cogged

MGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
K76-34997

LiftMaster RPM Sensor Kit for L2 L3 L4 L5

  • For use with various LiftMaster® Commercial Door Operators
OSHW-6533-1M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Left Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
CPT215-END-KIT-U

Miller Edge Universal End Kit for CPT215/223

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
  • This end cap will also work on the CPT223 extrusion
1222_DUAL_TROLLEY_20'

LiftMaster Additional Trolley kit for TDC operators for 20' high door includes #41 Chain for 20ft High Door Angle tracks (2x) 20' (Actual length 275") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 20ft tracks #41 chain hardware & Round Bar 1" x 12'
  • Works with TDC12 & TDC22 Maxum operators
MGHW-6113-0M00

Manaras MGH with Damp Area Mod (Mod081) 3/4 HP 120V Monitored Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • includes damp area modification
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MT21-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Gray Left Hand Outlet Sold per Foot

  • €¢Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
PDC300-1-125-40-20

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
26004A.S

Genie Bolt Retainer

  • The bolt retainer is used with the bolt that secures the pulley bracket to the pulley support
41D0236

LiftMaster keypad replacement kit for EL25 and EL2000

  • This replacement keypad features a 16 button face with weather protection gasket
  • fits Elite series EL2000 and EL25 access control systems
  • Also known as: 041D236 180D0236 00000000000180D236 180D236
TDC48-14

LiftMaster Trolley Chain Pack #48 700LBS 14ft Door

  • Chain pack only
  • TDC48-14 is a #48 Chain Pack Kit for 14 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 14' commercial doors.
MYQ-C43ACXW

LiftMaster MYQ Outdoor Wired Camera Weather resistant Motion detection & 2-way talk

  • 4-hour Proactive Security: Automatically locks & closes compatible doors and garages when it detects a person during pre-scheduled times ensuring your home is always secure. Video plan monitoring required. Complete Visibility: Capture every detail with 1080p full HD video featuring a 130º wide-angle lens and a 360º adjustable swivel lens for comprehensive coverage plus two-way communication for remote interaction. Vivid Night Vision: Enjoy color night vision for crystal-clear 24/7 image quality regardless of time of day. All Weather Reliability: Built to withstand the elements with reliable long-lasting performance rated to operate in temperatures from -4ºF to 122ºF. Quick and Easy Setup: Get set up in no time with integrated Bluetooth a fully adjustable mount and 25-foot power cord. Premium Smart Features: With smart detection features receive intelligent alerts that quickly show what triggered the camera and when. Record and save events for up to 30 days.
Z9962

L5 Operator Mounting Bracket

  • Compatible with L5 Jackshaft operators
  • Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
  • Precise chain tension adjustments through the adjustment bolt
  • Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
  • Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
  • Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation
    • .......more details
CLUTCH005

Manaras Friction Clutch 1-3/8" #50 MGH

  • For MGH 2/3/5HP
026-122

Blue Giant Heater Element **Special Order

  • Price by Quote Only