Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
20449R

Genie Chain Glide Rear Housing Cover

  • Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
  • Contains gear housing cover only
IRB-SH-SET

EMX Industries Steel Protective Hoods Only Grey Powder Coat Pair

  • Includes 2 hoods
  • Powder-coated steel construction
  • Compatible with EMX IRB-MON EMX IRB-4X safety photo beam sensors
  • Each hood fits easily over gate/garage door opener sensor
41D9044

LiftMaster Battery/ Logic Board Cover RJO

  • Compatible with 8500 and 8500W
CP-SH-34-MC3

Lynx Complete Limit Shaft Assembly #41 Chain

  • For trolley operator
2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

  • Torsion spring wire only
  • .135 wire size
E/1929/022

Automatic Systems Round Arm Ass'y 10' (BL229)

  • Used on the BL229 gate op.
STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

  • Reinforcement bar 3"
LA500SLRHARN

LiftMaster Solar Harness Kit LA500

12-3000

Flanged Bearing 1-1/4" x 1/8" **to extent of inventory

  • Fits SW470 gate operator
41ASWG-489

LiftMaster Cable Repl. Kit 24V 3m with Connector

  • For use with LiftMaster® Model LA400 Series Commercial Swing Gate Operators
.192_2-3/16_60R

Spring Wire .192 x 2.188 x 60" CTD RAW RH

  • .192 x 2-3/16" x 12'
15-41B10G1

Sprocket 41B10T 3/4" Bore

  • Also known as: 15-41B10GXX 15-41B10G1 155010
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

  • Compatible with LiftMaster® Model APT trolley Operator
CA-104-312

Continuous Angle 1-1/2" x 3-1/2" x 104" L Sold per Piece *** NLA

  • 12-ga angle
6X30PO50

Devanco Loop 6' x 30' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
41D8260

LiftMaster Cover 8355W

  • A one piece LiftMaster® "Silver" Replacement Cover.
  • For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers
26117

Doorlec Limit Cam Retainer Plate

  • Fits Most Doorlec Commercial operators except Explosion-Proof Operators
  • Will not fit on waterproof operators with small electrical enclosure built before 1999
MSC330V72-BULK

Motor Start Capacitor 330V 72-86MF

CP-MO-34-123/1

Lynx Electric Motor 3/4 HP 115/230V 1 Ph

  • Electric motor only
MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
3BX

Control Station Exterior Surface Mount O/C/S N4 Metal Enclosure

  • Metal Enclosure
  • Buttons aligned in a triangular pattern
  • H=4-3/8" W=4-1/8" D=2-5/8"
  • 2 NO contacts and 1 NC (stop)
  • Nema 3R 4 12
3BX
LM56A

LiftMaster Magnetic Proximity Reed Switch

  • Normally Open magnetic sealed reed switch; proximity switch
  • Used for overhead door contacts.
RSH-6214-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
60-6560-A-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Asphalt **** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5†long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36†long x 10.5†wide x 2†high (main piece)
  • EndCap: 5†Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1†x 1½†channels for protecting temporary or permanent cables or hoses.
    • .......more details
CP-IDLER-ASY-MCBH

Lynx Front Idler Assembly Commercial MCBH

K21-38158

LiftMaster Current Sense Harness Kit 3PH L5

  • This is a Current Sense Harness (230/460/575V) Replacement Kit.
  • Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; manufactured after February 2016.
  • Complete replacement kit includes: (2) current sense harnesses of different lengths to accommodate all models.
  • Models manufactured before February 2016 DO NOT feature current sense technology.
  • We highly recommend replacing the existing boards with an updated Logic 5.0 system that utilizes current sense technology
  • Refer to the following replacement boards for compatible upgrades: K001D8395 1PH/3PH Logic Board for all L5 models K001D8397 3PH/L5 Power Board 230/460V
    • .......more details
CB1805000-KOR

Cable 1/8" 7x19 5000' Galvanized Supreme ** Price on request

  • Galvanized Cable 1/8" 7x19 5000ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Stainless Steel Cable Specifications
109904

Amarr Snap Latch Supply Bag for 2" Thick Doors

  • Is needed when 105380: T-Handle Lock Kit for 2" thick doors is order or the lock won't work.
10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

41D8198

LiftMaster End Panel with all Labels and Light Socket

  • End panel works with various models
MV00210

Micanan Banner Reflector 3"

  • Compatible with Banner #MV-00300 reflective photocell
7001-10-ANODIZED

Commercial Side & Top Weather-Strip 10' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
PRO-GH-15011U-RH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
PRO-GH-15011U-LH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
CGH151L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1-1/2 HP 115/230V 1P L5 - Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except if a Mod is added
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
C-24-12-2-BLK-TINT

Thermal Window 24"w x 12"h for 2" Door Black Tinted Grey Glass

  • For 2" thick door
31118

Doorlec Sprocket 41B12-5/8" Plain Bore

  • Plain bore no keyway
MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

  • This will only work in the Pro LH operator.
ME112-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

.192-134-R

Cut-to-Length Torsion Spring .192 x 1-3/4" Right Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
HINGE-1214-PCG

Powdercoated Hinge #1/2 x 14 gauge Grey ** To Extent of Inventory

  • Heavy Duty 14 gauge offset hinge #1/2
  • Powdercoated Grey
EPC-1

Accessory Hardware Kit for Gate Track for 3-1/2" Pipe *** Price by Quote Only

  • Includes guides rollers & hardware
J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
K081C0168

LiftMaster Screw Drive Rack

  • Also known as: 081C0168 81C168
  • This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240
0/7530/248

Automatic Systems 5/8 Right Hand Rod End with Zerk

  • Used on the BL229 gate op.
SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Includes: (1) winding side only
ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

  • Ignores cross traffic in tight spaces with DETECT-ON-STOPâ„¢ feature
  • Easy to install and setup with the ULTRAMETERâ„¢ sensitivity display
  • Low current draw – green product
  • Easy identification of interference problems using the crosstalk and RFI interference display
  • Fits into small operator housings saving space size: 80 x 23 x 84 mm
  • 10 sensitivity settings
    • .......more details
MIRCU-02

Miller Edge Universal Non-Monitored Interface

  • Converts a monitored pulsed signal to a non-monitored normally open signal
  • Creates a Fail Safe signal; reports a fault when power is lost
  • Ideal for use with pre-2010 commercial door operators
Installation instructionsSell sheet
BRX10

GDI Brake Kit Brake Kit with Pull-rods; Axial

H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
12502

Doorlec Clutch Plate Aluminum 4" dia x 5/8" bore

  • Works with model LJ/LJH
SPRING-GALV-144

Torsion Spring Galvanized Wire Full Length Custom Order

  • Custom galvanized wire spring ordered to suit
E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

CAMPLATE001

Manaras Cam Plate GH Standard

E/BLOP/005

Automatic Systems Standard Tip Support Option

MA041

LiftMaster Mega Arm Tower Lock & Keys (No Dust Cover)

  • Comes with two keys
SPRING040

Manaras Disconnect Spring

REDUCER030

Manaras Reducer CC63-40D Frame 56

12501

Doorlec Clutch Plate Aluminum 4" dia x 1" bore

  • Works with models EHJ and ETBH
MOD130

Manaras Cogged V-Belt Upgrade

  • The standard v-belt is replaced by a cogged v-belt for added durability
  • Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
  • This is available only as an upgrade with the purchase of a commercial op.
41A7278

LiftMaster Sprocket Kit 12-Tooth

  • Includes sprocket and screws
SPR41B44-1

Sprocket 41B44-1" shaft

SABLOP/12X

Automatic Systems Red LED Lighting Module for Arm

K10-10166

LiftMaster Clutch Plate

  • Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230
BEARING006

Manaras Flange Sealed Bearing 5/8"

  • Flange sealed bearing for 5/8" shaft
2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

SELECTOR-8L5

Devanco replacement rotating 8 position switch selector for 8L5-OCS

  • replacement rotating encoded 8 position selector for 8L5-OCS
BTN-8L5-RD

Devanco red replacement button for 8L5-OCS

  • red replacement button for 8L5-OCS
MX00128

Micanan Clutch Assembly for PRO-GOHD

WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

  • Fits model ETBHW/ETHW
DHJ501L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Right Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
BCSI-PM10

Pivin Drapeau Clutch Plate for BCSI Gate Operator ** Price by Quote Only

  • Friction Plate
MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • NOTE: Operator must be supplied with reverse limits
  • If purchasing for field install the limits on the operator would need to be reversed
MT22-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MT22-GRAY-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
50690

Doorlec Clutch Assembly for ETBH

RP-BRK-WALL

Lynx Wall Bracket RSI

K72-12591

LiftMaster Clutch Shaft Kit HMJ

GATE_RN3.5

Nylon Gate Roller for Cantilever Gate

1004-2-12'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 12 ft***Actual Length 12'2"***

  • For door thickness 2"
Q210

LiftMaster Gear Box Kit #70 K75-50224

  • For use with various LiftMaster® Commercial Swing Gate Operators manufactured after 1997
K76-37667-2

LiftMaster Limit Box Kit

  • Compatible with model SL585 Slide Gate Operators.
H-0168

Autogate VBelt Banded B-66

  • New Style Double Reduction
3BXL

Control Station Exterior Surface Mount O/C/S N4 with Key Lockout

  • Metal Enclosure
  • Buttons aligned in a triangular pattern
  • H=4-3/8" W=4-1/8" D=2-5/8"
3BXL
MP-00010-U

Micanan Auxiliary Limit Switch for Monitored ECB

  • Installed to control auxiliary device
MD-00252

Micanan Connecting Link #50

39360R.S

Genie Optical Encoder Assembly for Belt/Chain Drive

  • Compatible with many of the newer Genie chain and belt drive openers.
  • New DC Optical Encoder Assembly for Chain and Belt Drive Garage Door Openers.
  • Also Compatible with Overhead Door Odyssey Series #7030 and Destiny Series #8030 Chain and Belt Drive Garage Door Openers.
1005-1-1/2-14'

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-1/2"
FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

  • Must specify if L-retainer is required
27020

Doorlec Electric Motor TEFC 1/3 HP 115/230V DC301

MOTOR009

Manaras Electric Motor1/2HP 120/240V 1PH

  • Instant reverse intermittent-duty electric motor only for MTBL MJ MJH MTH & MTBH models
  • 1725 rpm built-in reset
C-6X48-2-BLK

Thermal Window 6" x 48" for 2" Door Black

  • For 2" thick door
2376.177_25.900

Whiting Torsion assembly .177 wire size 25" spring length 90" shaft

2806.148.200

Whiting .148 x 2-3/16 x 20" Roadside with Cones

MODKIT012B

Manaras Non-Reset Cycle Counter Kit - Boards

  • Field install kit
  • When activated counts one complete cycle of the door
  • Hardwired
MGH-6535-ECB-LH

Manaras 1.5 HP 600V 3P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection