Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

CABLE_532SS5000

Cable 5/32" 7x19 5000' Stainless Steel ** Price on request

LEVER051

Manaras Brake Lever MGH C-1 Galvanized

029-98105

T-Style Replacement Door White Stainless Steel Package 029-98105

  • Replacement door size between 72"- 98" wide x 100.25-105" high
  • Painted white
  • Stainless steel package
  • Includes Hinges Rollers and Cable
MIRM-T2-50

Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
  • .......more details
26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
23-20088

LiftMaster On/Off Switch 120V 15A

  • Also known as: SN5530039 MA019
C-514-INSTALLED

Cones 5-1/4" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF514U
SLC-221

Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
  • .......more details
2650-112-05

Linear Cold Weather Package 230V SLC gate Op. Only

  • Cold weather package includes: Arctic oil Heater Cogged V-belt
7001-7-CHARCOAL

Commercial Side & Top Weather-Strip 7' Long - Charcoal 7001-HH (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
37314

Doorlec Relay Mini 120V

  • For overrun pre-wired 25 Amp
CB-1.097

Whiting Stainless Steel Cable 97" L with Plain Grommet 5/16" Eye

EHJ-383-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 208V-3Ph

  • Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
1104-10'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 10' Long - Light Bronze (F). **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 7' Long - Light Bronze (F). ***NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K20-3050B-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 Contactor

  • Standard 1/2 hp motor
  • Same as 20-3033-1
.319-6-LH

Cut-to-Length Torsion Spring .319 x 6" Left Hand Blue/Green

  • Spring wire only. Cones and Filler extra
5001-WG-16-MOAK

Residential Side & Top Weather-Strip 16' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
5001-WG-10-MOAK

Residential Side & Top Weather-Strip 10' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
1104-8FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 8' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 7' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
6X16SC50

Devanco Loop 6' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
28020010-500

Cable Stainless 5/32" 1x19 500' Inox ** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
H12G11-SS

Hinge #11 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
80-2103

LiftMaster Tinnerman Nut **DISCONTINUED

  • Black Plastic Knob
  • Formerly 802103 G802103
  • For SW470 with GL or S3 Board
V3563-00-W-200

Vinyl Seal 3" Bottom Bead End 198" Bead Grey 200' Spool

  • Bead diameter 3/16"-7/32" +/- tolerance
ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
26CW94325-CUT

Truck Door Bottom Panel with Seal (15" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
  • .......more details
9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

Q400E-HCT

LiftMaster Control Board HCT

  • Replaced Q400D-HCT
MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
  • .......more details
19-5118-NP

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door Nickel Plated

  • For 3/4 & 1 HP trolley operators
CABLE_1/8SS5000

Cable 1/8" 7x19 5000' Stainless Steel ** Price on request

HBS3U

Stainless Steel Bottom Fixture 3" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For 3" Doors
  • Fits 2" or 3" Track
  • Single End Stile
  • Pins and Cotters included
  • .......more details
CP-BRG-58

Lynx Bearing 5/8"

  • 6 in total on a MCJH
510.3228.07

Whiting Double End Hinges DF Mild/Nylon - 7 Panel Door Add-On Option

  • dd-on option when ordering door.
MALEDCW

LiftMaster Counterweight for 17ft LED Arm

  • For use with MALED17 17 ft. LED Arm for MA/MAT
MX00145

Micanan Brake Assembly for PRO-APT Solenoid NOT included ** DISC

  • Discontinued. Use part number MX00140
H105L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Left Hand W/Brake

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • .......more details
H101L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Left Hand W/Brake ***No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • .......more details
MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

MM00011

Micanan Brake Solenoid Cover

1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
7001-WG-7-CO

Residential Wood Grain Side & Top W/S Cherry Oak 7' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
  • .......more details
COVER048

Manaras Plated Solenoid Cover for OSH

  • Cover only
CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

  • Galvanized cable 1/8" 7x7 500ft spool.
  • A higher quality cable than the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
5001-8-CHARCOAL

Residential Side & Top Weather-Strip 8' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
25-4003-K

LiftMaster 2.6-3.7 Amp Overload Fuse

  • For models: SL595-200-53
T012

Manaras Trolley Track 12ft for 1/2HP models *Actual length 174"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
26-40029

Truck Door U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors ** To Extent of Inventory

  • Aluminum extrusion construction
  • For use with Bottom Seal #26-40027
26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40045
MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
HSCFV112

Hinge Full Vision Hinge Clopay Style "B" 12-ga Stainless Steel *** NLA

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Use on Clopay Brand Full Vision Products
GH4416-09-L

Green Hinge #9 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-07-R

Green Hinge #7 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-01-R

Green Hinge #1 12-ga Right Hand ***No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
MB-02102

Micanan Electric Motor Only 3/4HP 230/460V 3PH

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD
MP00019

Micanan Up-Charge Track and #410 (#48) chain for 20' h Door *Actual length 270"*

  • For 1/3 HP and 1/2 HP operators only
MP00018

Micanan Up-Charge Track and #41 chain for 18' h Door *Actual length 246"*

  • For 3/4 HP and 1 HP operators only
MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

  • Allows for operation of a door by an auxiliary chain hoist.
  • Hoist mechanism is coupled to front end of drawbar
  • MUST specify door width and position of hoist (left or right)
11-10987

LiftMaster Clutch Shaft for MH

K72-33872-1

LiftMaster Limit Switch Shaft Kit

  • For models MT BMT MJ MH and MHS logic control
  • Kit includes: limit shaft limit nuts limit bearings limit sprocket washers compression ring roll pin and e-ring
7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

  • A Whiting original
342.115-CUT

Whiting Intermediate Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer must specify exact length required
.343-5-1/4-LH-C

Torsion Spring .343 x 5-1/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 5-1/4" Length: 12 ft
.343-3-3/4-RH-C

Torsion Spring .343 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 3-3/4" Length: 12 ft
.331-5-1/4-RH-C

Torsion Spring .331 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 5-1/4" Length: 12 ft
.331-2-5/8-LH-C

Torsion Spring .331 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 2-5/8" Length: 12 ft
.319-6-RH-C

Torsion Spring .319 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 6" Length: 12 ft
.312-3-3/4-LH-C

Torsion Spring .312 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 3-3/4" Length: 12 ft
.306-6-RH-C

Torsion Spring .306 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 6" Length: 12 ft
.295-2-5/8-LH-C

Torsion Spring .295 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 2-5/8" Length: 12 ft
.295-1-3/4-LH-C

Torsion Spring .295 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 1-3/4" Length: 12 ft
.283-2-5/8-RH-C

Torsion Spring .283 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 2-5/8" Length: 12 ft
.283-1-3/4-RH-C

Torsion Spring .283 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 1-3/4" Length: 12 ft
.273-3-3/4-LH-C

Torsion Spring .273 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 3-3/4" Length: 12 ft
.273-1-3/4-LH-C

Torsion Spring .273 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 1-3/4" Length: 12 ft
.273-2-RH-C

Torsion Spring .273 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2" Length: 12 ft
.262-2-LH-C

Torsion Spring .262 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 2" Length: 12 ft
.262-1-3/4-RH-C

Torsion Spring .262 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 1-3/4" Length: 12 ft
.243-1-3/4-RH-C

Torsion Spring .243 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .243 ID: 1-3/4" Length: 12 ft
.234-2-RH-C

Torsion Spring .234 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2" Length: 12 ft
.225-2-LH-C

Torsion Spring .225 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2" Length: 12 ft
Q310

LiftMaster Surge Protection for MIR-1 ( K74-50271) ** DISCONTINUED

  • For the Miracle-One single arm gate operator
  • Same as part no. K74-50271
SOLID_SHAFT_24'

Solid Shaft 1" Keyed 24 ft Galvanized

  • Maximum length for a solid shaft is 24ft
  • Actual length is approx. 24'-1"
SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

  • Actual length is approx. 12'-1"
19-5816-NP

LiftMaster Trolley Chain Pack #48 for 16ft Door Nickel Plated

  • Chain pack only
CHAIN058

Manaras #410 chain 48 Pitch (24" long)

MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
PPLK1-10

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 10/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Keychain remote control sold in a 10 pack
  • .......more details
41A5615

LiftMaster Chain Spreader

  • For models 2575 3575 3275 PD752 PD758 and others
.343-3-1/8-SQ-R

Cut-to-Length Square Wire Torsion Spring 24.75" long NO Cones Right Hand

7001-8-W/B

Commercial Side & Top Weather-Strip 8' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
801

Fasteners Sleeve Anchor 5/16" x 1-1/2" 100/Box

  • Secure anchoring into concrete brick or block
18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

  • Gearbox for GH operator
LEVER065

Manaras Brake Lever

MH00015

Pillow Block Bearing 1" UCFL 205-16

K77-12486

LiftMaster Parts Box for Model MT/ BMT

C-600-INSTALLED

Cones 6" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF600