Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
R5221

Sheave Strap 4"

  • Sheave strap also known as fork only
2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
K75-34828

LiftMaster Idler Shaft Kit

  • Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
  • For SL575 SL585 with GL Board
K74-34821

LiftMaster Reset Switch

  • Complete with reset button and mounting bracket
K75-34791

LiftMaster Clutch Kit for SL585

  • Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring
65-32449

LiftMaster Thermostat Control Heater 115V & 575V Fin Type ** Discontinued

  • Designed to automatically maintain a suitable temperature inside a control enclosure down to -40 degrees F.
  • Uses a high surface area aluminum heat emitter to eliminate the need for a fan
  • Provides low-radiation and high-convection heating in the enclosure
  • Adjustable from 30 degrees to 120 degrees F. (0 to 50 degrees C.) 208V - 460V
  • Compatible with operators SL575 SL585 and SL595
7001-8-CHARCOAL

Commercial Side & Top Weather-Strip 8' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
37313

Doorlec Relay Flat Pins 2 Pole 24V

COOKSON-45-GREY

Rolling Steel Slat 3" Cookson Insulated with Wind Locks

  • Special order
510.7302.07

Whiting Stainless Steel Interior Hdwr Pkg DEH Steel 7-Panel Door Up-grade Option

  • Double end hinge option
41D8181

LiftMaster Cover

1104-9FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 9' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
PPLV1

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Block coded
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochure
POCKETWHEEL005

Manaras Pocketwheel Opera

ACT-34D

Linear 4-Channel Block Coded MegaCode Key Ring Trans Prox Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Built-in 26-bit Wiegand proximity tag
  • Eliminates need for separate proximity card or tags and transmitter
  • Supplied with quick-disconnect key ring
  • Same facility and ID codes for transmitter and proximity tag
  • Sold in lots of 10
    • .......more details
K20-1050B-1RL

LiftMaster Electric Motor 1/2 HP 115V 1Ph BM

  • 1/2HP 115V 1 PH resilient base mount motor with one drive shaft key.
  • Check the manual for your specific model number before ordering to ensure compatibility.
2B639

LiftMaster Speaker for EL25 (41B0639)

  • 1B0639
PRO-HBH-10023U-R

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** NLA

27-24402

Truck Door Dual Torsion Spring Assembly 87/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 87" Spring Length: 35" Wire diameter: .187 -
  • Winding cone color: White
3-26-1

Half Hinge Type S Service Type Door ** Available to Extent of Inventory

  • Half hinge type "S"
  • 16-gauge
K75-10259

LiftMaster Track Spacer Assembly

  • Standard duty trolley operator part
NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

  • Used on old MJH
5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

  • Pierced track
28020024-500

Cable Stainless 3/8" 1x19 500' Inox ** Price on request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
28020010-500

Cable Stainless 5/32" 1x19 500' Inox ** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

  • Shoulder Bolt
  • For SW470-S3
  • Formerly 82SB5008 G82SB5008
9372263800

Square Torsion Spring .375 x 6 x 38" with Cones LHW 1-1/4" Bore

CHI-SPECIAL

C.H.I. Special Order Door

  • Special order as per customer's requirements
PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

  • Three button wall station Open/Close/Stop
  • NO contacts on the Open and Close buttons
  • NC contact on the Stop button
  • Stainless steel surface plate
  • Flush mount
.437-6-L

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
ZT37028235

Firestar Shutter 540 Galv with Lock & Key

.306-.250-DUPLX

Duplex Assembly .306 x 6" x 39" and .250 x 3-3/4" x 39" with Cones Right Hand

  • Assembled by manufacturer
745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

  • Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
  • Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
  • 4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC
OSH-6533-ECB-LH

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation manualSell sheet
9301644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones RHW

MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

ME111-E

Miller Edge Black End Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz

  • UL325
  • Works on the new Lynx operators
  • For 3 doors
Programming InstructionsCompatibility chart
1104-9'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K001A5251-4

LiftMaster LGO Replacement Board 315 MHz **DISCONTINUED

MX00145

Micanan Brake Assembly for PRO-APT Solenoid NOT included ** DISC

  • Discontinued. Use part number MX00140
PBS3-GREEN

Replacement Button Only - Green

  • Replacement button for 02-403P
PBS3-BLACK

Replacement Button Only - Black

  • Replacement button for 02-403P
OSH-6233-CONT-R

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual Sell Sheet
8086.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Roadside with Cones

  • An original Whiting assembly
1001-18-GREY

Commercial Side & Top Weather-Strip 18' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
K79-13493-2

LiftMaster Logic Board Replacement Kit FDCL

  • Replacement board for fire door model FDCL
TC134-16

Top Cap 1-3/4" 16 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
PB-BE101BP

Contact Block N/O Contact

  • Base mount
  • For use with RC P enclosures. IP65
MK-00098

Micanan Boot for Cut-Out Switch

T012

Manaras Trolley Track 12ft for 1/2HP models *Actual length 174"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
26-40029

Truck Door U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors ** To Extent of Inventory

  • Aluminum extrusion construction
  • For use with Bottom Seal #26-40027
MAW123-BLK-RH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
4-11-7R

Roller 3" 10-Ball 7" Stem Nylon

  • Sealed bearing for long life in dusty conditions
  • 7" stem (working length = 6 1/8")
HSCFV112

Hinge Full Vision Hinge Clopay Style "B" 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Use on Clopay Brand Full Vision Products
MK00799

Micanan Smart 10.0 Full Feature Circuit Board Non- Monitored with H.D Relays (MK00701-NM)

  • For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
  • The board does NOT have P1 & P2 terminals
Instructions Manual
MD-00057

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

GH4416-09-L

Green Hinge #9 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-01-R

Green Hinge #1 12-ga Right Hand ***No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
COUPLING002

Manaras Disconnect Coupling for MJH ** NLA Sold in Kit only** Use MOUNTSHAFT010 or 010A **

  • If MJH is manufactured prior to 1998 4 x PIN016 are required
  • If MJH is manufactured after 1998 2 x PIN016 are required
  • PIN016 sold separately
IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

  • 1 ft L x 2" H x 3" W
27-48-280

Extension Spring 8' Door - 280 lbs Gold

  • Single - Loop
  • 27" long 48" stretch 280 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

  • For use with LiftMaster LA500 Series swing gate operators
  • Includes ID resistor kit
  • Includes LA500 product ID
K77-36541

LiftMaster Antenna

  • For various gate operators
1224-GLASS-ONLY

Elton Sealed Glass for frame 1224-1-3/4"

  • Thermal replacement glass only
K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

  • For models MT BMT MJ mechanical operators
  • Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring
616001404

Rolling Steel 900 Series Guide Channel Sold per Foot

  • Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.
SLT4-18P

Rolling Steel 3" Crowned Slat 18-ga Primed

ST316COP

Copper Stop 3/16" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL316COP
.363-6-RH-C

Torsion Spring .363 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 6" Length: 12 ft
.319-3-3/4-LH-C

Torsion Spring .319 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 3-3/4" Length: 12 ft
.319-2-5/8-RH-C

Torsion Spring .319 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 2-5/8" Length: 12 ft
.312-3-3/4-LH-C

Torsion Spring .312 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 3-3/4" Length: 12 ft
.312-2-5/8-LH-C

Torsion Spring .312 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 2-5/8" Length: 12 ft
.306-5-1/4-LH-C

Torsion Spring .306 x 5-1/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 5-1/4" Length: 12 ft
.306-3-3/4-LH-C

Torsion Spring .306 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 3-3/4" Length: 12 ft
.273-2-RH-C

Torsion Spring .273 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2" Length: 12 ft
.262-3-3/4-LH-C

Torsion Spring .262 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 3-3/4" Length: 12 ft
.262-1-3/4-LH-C

Torsion Spring .262 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 1-3/4" Length: 12 ft
.234-2-5/8-RH-C

Torsion Spring .234 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2-5/8" Length: 12 ft
.218-2-LH-C

Torsion Spring .218 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .218 ID: 2" Length: 12 ft
.225-1-3/4-RH-C

Torsion Spring .225 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 1-3/4" Length: 12 ft
.207-2-LH-C

Torsion Spring .207 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .207 ID: 2" Length: 12 ft
.207-1-3/4-LH-C

Torsion Spring .207 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .207 ID: 1-3/4" Length: 12 ft
.192-1-3/4-LH-C

Torsion Spring .192 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .192 ID: 1-3/4" Length: 12 ft
.192-1-3/4-RH-C

Torsion Spring .192 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .192 ID: 1-3/4" Length: 12 ft
44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 240 lb load
1715.20

Whiting Stainless Steel 2-Hole Grab Handle

Q300

LiftMaster Traveler Carriage for Miracle-One**Discontinued

  • Replacement traveler carriage for Liftmaster Elite Miracle-1 model
  • Same as part no. K75-50341
K33-51206-315

LiftMaster Radio Receiver Board Elite **DISCONTINUED

  • Fits the Miracle-One gate operator
Q311

LiftMaster Surge Protection for Master / Second *** No Longer Available

  • For the Miracle-One two arm gate operator - master/ slave
  • Same as part no. K74-50329
BK306

Jamb bracket J-06 #6 12 gauge

  • Sold by the piece
  • Height 3.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK304

Jamb bracket J-04 #4 12 gauge

  • Sold by the piece
  • Height 3.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK301

Jamb bracket J-01 #1 12 gauge

  • Sold by the piece
  • Height 2.40" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.