Devanco Canada - Get The Right Garage Door Opener‎ and Parts

29140

Doorlec Transformer 230V pr 120V sec 50VA

230V primary 120V secondary 50VA

CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

K41-0372-999

LiftMaster Drive Sprocket Chain Repair Kit

Repair Kit to correct quality issue with TDC1200 & 2200 Maxum trolley openers
MAXUM CDO SKUs affected TDC7S1BMC TDC7S4BMC TDC12S1BMC TDC12S4BMC TDC12X1BMC TDC12X4BMC

OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

BOARD076R

Manaras Replacement Power Board

Used on all Manaras circuit board type operators

29201

Doorlec Transformer 460V pr 120V sec 35VA

460V prImary 120V secondary 35VA

CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake optional **
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

GALV-273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-375-334-R

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-375-334-L

Cut-to-Length Torsion Spring .375 x 3-3/4" Left Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

CLM125-H

Linear Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

LA400XL20W

LiftMaster Single Arm Solar Package for LA400 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA400DC)

Kit Includes: LA400DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA400DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016

99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

99119671-PER-FOOT

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Amarr Residential Open Back Doors and Classica models

GALV-250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

GALV-250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

GALV-243-334-R

Cut-to-Length Torsion Spring .243 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

2806.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 29" Long
Roadside
For Curbside order part # 2807.177*290

CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws

CPT215-END-KIT-T2

Miller Edge End Kit for CPT215 10K Ohm Resistor (T2) Configuration

Kit contains: (2) Caps (2) cages (1) wired plug (1) 10K plug (1) non-mon. plug (2) screws
No glue is required

CPT215-PER-FOOT

Miller Edge Field Configurable Sensing Edge Cut-to-Length

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Minimum Length: 3ft

.......more details

CPT-215-50

Miller Edge Field Configurable Sensing Edge 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Lead Wire 12 in. 22 gauge SJTO

.......more details

T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
For use with specific Torque Force chain hoists ie 200R (244687)
This chain will NOT work in the hoists that use the 30.7-19-5 chain
works with Micanan / Nice Commercial operators

GALV-273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

This is a Whiting original roller

K23-34822

LiftMaster Open/Close Switch

For use with various LiftMaster® Commercial Slide Gate Operator Control Boxes

10FALCON-EXW100

BEA Falcon Wide Explosion Proof HSG 100ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX Wide can be mounted from 11 ½ – 21’ to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX W: 30’ × 11’ @ 21’
Operating termperature: -22-140F

.......more details

MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: 70 milliseconds

.......more details

Installation Instructions MWT12B Spec Sheet MWT12B FAQ MWT12B

DOCK-SEAL-R100

Dock Seal R-100 Fixed Header Seal Price by Quote Only

Made to order - Price varies according to specifics
This model is ideal for door openings of 8′ wide x 8′ high
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time

.......more details

DOCK-SEAL-R600

Dock Seal R-600 Adjustable Curtain Seal Price by Quote Only

Made to order - Price varies according to specifics
This model is ideal for door openings of 8′ wide x 10′ high
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time

.......more details

R-600 Order Form Catalogue

210339

Skylink Belt Gear with Holder LQ-803

GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

42GRR-9002

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 70-264VDC/AC

GALV-343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

10LZR-FLATSCAN-SWB

BEA LZRFLATSCAN Kit Black 2 Sensors + Cables & Accessories

Time-of-flight presence sensor for use as a stand alone safety sensor on automatic pedestrian swing doors.
Can be used as a reactivation sensor on the approach side of low energy doors.
Generates 170 detection points across a single curtain allowing for coverage over the entire face of a single door leaf including the hinge area.
Finger Detection Technology™ utilizes 100 detection points within the hinge area of the door protecting hands and fingers while the door is in motion.
Max. detection range: 13' with a reflectivity of 2%
IP54

.......more details

041-0400-000

LiftMaster Door Shaft Collar

Fits with LiftMaster model #98032

Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

Compatible with various LiftMaster® Swing Gate Perimeter Access Systems

LZR-H100

BEA LZR Gold-Black BLK-02 H100

Laser scanner for gate and barrier applications.
Provides four laser-based curtains offering a three dimensional detection zone.
Detection curtains are highly configurable and can be set up for activation and presence detection in vehicle sensing applications.
Effective alternative to induction loops.
Max detection range: 32'x32'
Cable length: 33'

.......more details

LZR-H100 User Guide (EN)LZR-H100 Cut Sheet (EN)LZR-H100 User Guide (FR)LZR-H100 Cut Sheet (FR)

LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

Laser-based sensor system for automatic swing doors.
Time-of-flight technology used to eliminate the limitations of infrared-based devices.
Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
Provides asjustable pattern depth.
Min/max door width: 20"-48" from leading edge of sensor LED
Mounting height: 75"-98" from finished floor to sensor LED

.......more details

BL229-EX1929-D45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Right Hand

2110-700

Linear Idler Assy Large Gate

GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

K41-0380-000

LiftMaster Bridge Rectifier 700/1200

For Maxum ops

K41-0381-000

LiftMaster Toroidal Transformer 700lb / 120VAC-240VAC

For Maxum ops

K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC)

For Maxum op

K41-0409-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Trolley

For Maxum Trolley 1200 Op

K41-0378-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 1200)

Maxum T-1200

K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

Maxum J-1200

K41-0377-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 700)

Maxum T-700

MI00034

Micanan Pulley 9" OD c/w Bushing 3/4" ID

GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

GT103L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 208/230/460VAC 3PH

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

CP-PU-AWNING-1

Lynx Awning Pulley 1" MCJH

19-40010-SS

LiftMaster Roller Chain #40 Stainless Steel 10ft/pk

10ft length

19-40ML-SS

Master Link #40 Stainless Steel

For #40 chain

GX-200

Garex Ready to Install Door Grooved Special Order

Panel height 18* 21 and 24 inches (45 53 and 60 cm)
Panel width 1 ⅜": Up to 18 feet (548 m) 1 ¾": Up to 28 feet (853 m)
Door Thickness 1 ⅜" (3493 mm) / RSI 211 (R-12) 1 ¾" (4445 mm) / RSI 281 (R-16)
Windows 1 ⅜": Standard injected frame (1520 or 1542) 1 ¾": Standard injected frame (24x12 or 40x13)
Metal Thickness 26 ga Steel : 047 mm (00185 in) 23 ga Aluminum : 061 mm (0024 in)
Insulation: High-density polyurethane meeting the highest environmental standards

.......more details

GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

21" panel = 4 grooves 24" panel= 5 grooves
COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
Minimize the heat transfer between the inside and outside of your garage.
LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
WOOD END BLOCKS Suitable to receive steel end caps
HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor

.......more details

CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
Chain Spreader for Maxum for 1" door shaft

SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

BEARING048

Manaras Flange 2-Bolt Flange Bearing ID 3/4" Black

GALEOW

Erone 26-bit Wiegand Backlit Keypad

Compatible with ATRIUM CENTAUR and any 26-bit Wiegand system
Heavy-duty Zamak® cast alloy
Indoor/outdoor application
Blue backlit keypad
Weather resistant and vandal proof
PIN code: 4 to 8 digits

.......more details

Wireless System Chart

A22K

Erone Krypto 2-Door IP Controller

The ATRIUM A22K two door IP controller works perfectly with the most popular Wiegand card readers or with the embedded KRYPTO high-security solution providing the best of both worlds in access control.
KRYPTO is the easiest solution to manage DESFire® EV2/EV3 smart credentials on the market making worries of card cloning a thing of the past.
The auto restore of encryption keys upon power failure ensures an effortless system start up and management.
Additionally the A22K can easily be converted to an Elevator Controller (A22KEC) Schlage Door Handle Controller (ADH2K) or Aperio Door Handle Controller (A2PK) as needed.
Controls 2 doors / 4 readers (entry/exit per reader port)
Add more A22Ks to expand your system up to 500 doors

.......more details

Wireless System Chart

2376.156.17.730

Whiting Torsion assembly .156 wire size 17" spring length 73" shaft