Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
OSH-6434-M-N1-RH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

TDC1222-10

Liftmaster Comm. 10FT Trolley Angle set (10-5810-P x 2) and #41 chain pack (TDC41-10) ***Actual length 155"***

  • Double Angle Rails for doors up to 8'6" high
  • Includes #41 chain pack
S50E

LiftMaster Small Profile Ends Kit 10 Sets of 2

  • Fast easy to install and cost effective system no glue is required
  • One end for output wire other end with resistor for monitoring
  • Compatible with S50 Small Profile Edge
  • Includes: (10) sets of 2
GALV-295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-319-258-144-L

Torsion Spring .319 x 2-5/8" x 12ft LH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-306-258-144-R

Torsion Spring .306 x 2-5/8" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-334-144-L

Torsion Spring .273 x 3-3/4" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-334-144-R

Torsion Spring .262 x 3-3/4" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-258-144-L

Torsion Spring .250 x 2-5/8" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-234-258-144-L

Galvanized Torsion Spring .234 x 2-5/8" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2-5/8"
  • Length: 12 ft
GALV-225-2-144-RH

Torsion Spring .225 x 2" x 12ft RH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized
OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
K23-3001

LiftMaster On/Off Switch 125/277VAC 20A

  • Also known as: G233001 233001 23-3001
  • For use with various LiftMaster® Commercial Gate Operators
2807.192.320

Whiting .192 x 2-3/16 x 32" Curbside with Cones

15-50B16LGH

Sprocket 16 Teeth 1" Bore 1/4" Keyway w/SS

SB257B2

NICE Filter Board w/T3.15A Fuse

2376.187*29.900

Whiting Torsion assembly .187 wire size 29" spring length 90" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
GALV-225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" LHW Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" RHW Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Galvanized Brown Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
AW14K500-18-RF

Miller Edge Air Wave Edge System Trans/Recvr 18ft Non-Monitored

  • AW14-RF MRF-01 RAH-500 (18') P50 P-50H 218-27-18
  • AW14-RF-K10 end plug connector plug 1/2”-18 ft. hose
2704.148_140

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 14" Long
  • For Curbside order part # 2705.148*140
MINI-218-3-10-RH-W

Mini Storage Spring .218 x 3" x 10" RH Wagner End ***Price on Request

  • Special Order. Price valid on in stock springs only
MV00164

Nice AB 42GRL 9000-THRU-BEAM PHOTO Emitter 24V

GDI-LG940

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 Non Monitored

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
89029.0040

Todco Carriage Bolt SS 1/4-20 x 1-1/4" Splined

K11-8061

LiftMaster Main Shaft (1)

  • Also known as: 11-8061 118061 G118061
  • For use with various LiftMaster® Commercial Gate and Barrier Gate Operators
2528.084

Whiting Dual-Spring Shaft 84" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes pre-drilled
  • Cross Reference: For Whiting # 2376 balancer
1440-1-3/8"-WHT

Elton Residential Window for Flush Doors 1-3/8" thick 1440 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 42 5/16” x 14 1/4"
  • Cut-out size: 41 11/16” x 13 11/16”
  • Vision area: 39 11/16” x 11 5/8”
  • Different glass options and frame colours are available upon request
    • .......more details
2376.206.325.890

Whiting Torsion assembly .206 wire size 32-1/2" spring length 89" shaft

111031.0001.S

Overhead Door Link Hoist Release RSX

  • Hoist link for the Overhead Door RSX (rolling steel - hoist) commercial operator
HA-112-14G-22

Horizontal Angle 1-1/2 x 1-1/2 x 22" Flag Angle 14-Ga

CA-107-412

Continuous Angle 1-1/2" x 4-1/2" x 107" L Sold per Piece

10.1002.36

Truck Door Rivet 1/4 x 1-1/8 - 3/4 HD for #7515 Keeper Sold per Unit

  • Standard rivet used for installing #7515 Keeper
  • 3 rivets are required per keeper
102-0048

TNR Flexam EM 4/1 0+05 Black Weave Repair Sold per Inch

2704.187_30

Whiting Roadside Torsion Spring.187 wire 2-3/16" ID 30" Long

  • Torsion spring wire only
  • .187 wire size
O042010

AirLift Bracket Horizontal 90 Degree Lift Bar

K75-16512

LiftMaster FDC Brake Kit

  • For use with various LiftMaster® FDC Commercial Fire Door Operators
SSZP14-6-114

Solid Shaft 1-1/4" Keyed 14' 6" Zinc Plated

  • Actual length is approx. 14'-6"
8280.99

Whiting Aluminum U-Channel 99 IN Dry Freight

  • An original Whiting product
  • Use with Whiting seal # 5735
3228.6

Whiting 2" Nylon Roller 3" Shaft Sealed Both Sides Upgrade Option w/Door Package

  • This is a Whiting original roller upgrade package on a complete door
50685

Doorlec Clutch Assembly for EHJ Incl. Pillow / Speed Bearings with Metal Housing

MG020-Y-2E-P/FT

Miller Edge Sensing Edge Yellow 2-Wire End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
EHJ-353-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 575V-3Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
MM00050

Micanan 1-1/2" Collar Bracket #8 FDG MSI0054

O19R3000

AirLift Timer Macromatic with Socket

75-12362

LiftMaster Adaptor Plate with Fasteners

  • Also known as: 7512362 K75-12362
P40-10PFO

Hand Crank Reducer 107174

610.5600.3

Whiting Panel Option for Stainless Steel 5600.3 HD Bottom Roller Brackets

  • This is an upgrade option when purchasing a door or bottom panel
K75-30737

LiftMaster Disconnect Kit for GH

  • Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
  • Compatible with LiftMaster® Model GH Commercial Door Operators.
O22R1002

AirLift Airline 3/8" Sold per Foot

GAREX-PVC-W-8

Residential Side & Top PVC Weather-Strip with cap 8' Long (97") - White

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with snap-on cap to hide screws.
K86-RP10-208

LiftMaster Roll Pin 5/16" x 2-1/2"

  • Also known as: G86RP10208 86RP10208 86-RP10-208
71-6532448

LiftMaster Heater Kit Mod. 230V Field Install

  • Compatible with LiftMaster® Models SL585GL and SL595GL Slide Gate Operators
19-60ML-NP

Master Link #60 Nickel Plated

  • For #60 chain
2376.192.325.930

Whiting Torsion assembly .192 wire size 32-1/2" spring length 93" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
XBA4

NICE Indicator Lights for M3/M5BAR 13.1ft

  • The Apollo XBA4 is a 13.1 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the M3BAR and M5BAR barrier gate openers.
2376.200.30.850

Whiting Torsion assembly .200 wire size 30" spring length 85" shaft

684-33-104-A

Universal Bracket 2.25" x 2.5" x 12" w/1" x 12" Plate

.262_6"-LH

Torsion Spring .262 x 6" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 6"
  • Length: 12 ft
  • Special Order Minimum lead time 3 weeks
41D8257

LiftMaster Cover Only for 8550W

  • One piece cover is compatible with LiftMaster Model 8550W Elite Series
41B7418

LiftMaster Wire Harness Dual Light

  • Wire Harness Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® Garage Door Openers; manufactured 2005 to 2013 that feature a dual light system
PORT-ROYAL-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Port Royal design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
URBAN-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
1013-1-1/4-18'

Rigid Vinyl Bottom Retainer L-Shaped 18' Long

  • For door thickness: 1-1/4"
K77-37856

LiftMaster Front Cover Grey RSW12U CSL/CSW24U

  • Front cover only
  • HEIGHT: 18-1/4 Inches
  • WIDTH: 15 Inches
  • DEPTH: 13 Inches
P-0129/RH

Autogate Retro Bracket Right Handed System

  • This is needed to change over to their current motor
7001-9-ANODIZED

Commercial Side & Top Weather-Strip 9' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
C-24-12-2-BLK-TINT

Thermal Window 24"w x 12"h for 2" Door Black Tinted Grey Glass

  • For 2" thick door
7207

Whiting Balancer Bracket Center for Whiting Roll-Up Doors For #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
SPR41B14A410B32

Sprocket 41B14-410A32 x 3/4 K0 0S w/Ollite Bushing

GAL.262-258-144L

delete

41A7618

LiftMaster End Panel with Battery Cover and Light Socket 8550W

BCSI-PM10

Pivin Drapeau Clutch Plate for BCSI Gate Operator ** Price by Quote Only

  • Friction Plate
10.1002.23

Truck Door Rivet with Splines 1/4" x 1-1/32" Stainless Steel

  • Stainless steel construction
  • Round head design 11/16" head
SSZP8-6-114

Solid Shaft 1-1/4" Keyed Zinc Plated 8'-6"

PRO-GH-10021U-R

Micanan 1 HP 220V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
CM30E

Push-to-Exit Button Green

2807.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Curbside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 20" Long
  • For Roadside order part # 2806.171.200
.343-514-R-C

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
.312-334-L-C

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.306-334-R-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.262-2-R-C

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.262-134-L-C

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
PRO-GH-7583U-L

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
2807.148.180

Whiting .148 x 2-3/16 x 18" Curbside with Cones

PRO-GH-5053U-R

Micanan 1/2HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-5043U-R

Micanan 1/2HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-5081U-R

Micanan 1/2HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-H-7543-U-RH

Micanan 3/4HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
K72-19974-RB

LiftMaster Output Shaft & Sprocket

  • Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers
MK-00703

Micanan Harness 1-Phase 5-Relay Board

MK-00009

Micanan 9-Pole Control Terminal Strip

MK-00045

Micanan Overload Reset 1-Phase 18 Amps

MK-00036

Micanan Overload Reset 1-Phase 7 Amps

MK-00058

Micanan Dual Timer 24V Module APT

HAML-SHAFT-ADAPTR

GDI Shaft Adaptor 1" w/Sprocket Vertical Mount Application

ME110-2W-BLK-R

Miller Edge 2-Wire Black Right Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling that allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Worksheet
PRO-J-10083-U-RH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet