Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
13-10024

LiftMaster Limit Nut

  • Limit nut / cam for commercial door and gate operators
19-41ML

Master Link #41

  • For #41 chain
  • ANSI Standard Carbon Steel
19-50ML

Master Link #50

  • For #50 chain
  • ANSI Standard Carbon Steel
15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

  • Sprocket for #41 chain
50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

  • For models; EHJ ETBH and ETH
  • Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.
12562

Doorlec Lower Brake Shoe - Left

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
PRO-HHD-7511U-R

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation manualSpecification sheet
CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

  • Brake shoes for all Lynx operators
  • Assembly includes the shoes
  • release spring and bolt included
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
H14G02

Hinge #2 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #2 position
  • Use between sections 2 and 3
  • Same as part number 242
    • .......more details
H14G01

Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #1 position
  • Use between sections 1 and 2 or in the center position
  • Same as part number 241
    • .......more details
SEA433

Erone Tuned Antenna 433MHz

  • Increase reception and/or range
  • 11.5ft (3.5m) coaxial cable (RG 58) included
  • L-Shaped bracket for wall-mounting
Wireless System Chart
OSH-6113-ECB

Manaras Opera-SH 3/4HP 120V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
OPH-6112-ECB

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

  • Reversing contactor with 24V coil
  • Same as part # LC2K12107B7
  • Demensions: 3.5" long x 2.25" wide x 2.25" high
  • Use 03-8024K as possible replacement
MOUNTSHAFT014

Manaras Clutch Shaft Kit for Opera-H (OPH)

  • Input / clutch shaft kit for Manaras Opera-H
Drawing
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

  • Used on MTH/MTBH APE APT models
  • Same as Doorlec 19030
LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

  • Fits old medium-duty Manaras operators such as MDJ
  • SPDT - Cherry
Limit Switch Chart
LIMIT018

Manaras Double Limit Switch without Lever

  • Double limit switch (DPDT) - Cherry
  • The extra contact is used to control auxiliary equipment
  • Applies to all current operators
Limit Switch Chart
DRUM006

Manaras Steel Brake Drum Flat Track - replaces DRUM001

  • Replaces DRUM001
  • Brake drum for all operators except Gear Head models prior to 1999.
  • Use with BRAKEPART018
RADIO-28

Manaras MTM-1000 1-btn mini transmitter 313 MHz ** To extent of inv*** Repl. by RADIO-EM901

  • Open/Close mini remote for 1 door
  • Comes with LED battery life indicator
  • Mini 12V battery included
  • Key chain holder included
2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick max 96" wide
  • Includes Lock and keeper
AK-11

Linear Exterior Digital Keypad (ACP00748)

  • Self-contained keyless entry system ideal for airports hospitals warehouses office buildings parking lots and many other commercial facilities
  • Rugged cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
  • Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
  • Up to 480 programmable input codes of one to six digits each for activating either or both relays
  • Two LED indicators show system status
  • Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout
    • .......more details
Programming InstructionsInstructions de programmation
110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

  • Three channels - three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

  • Open/Close remote for 3 doors
  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 6561 (set by trinary dip switches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

  • Activates two Delta-3 receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

HAE00049

Linear Drive Sprocket Holder and Belt Clamp

218189-01

Linear Trolley Assembly

HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

HAE00004

Linear Limit Switch Assembly

  • For LSO LDO LCO
HAE00040

Linear Control Logic/Receiver Board

  • Replaces HAE00039
  • Control board for LSO LDO LCO models
5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

1336.8

Whiting Stainless Steel Roadside Top Closure Bracket for 8" radius

1209.1

Whiting Stainless Steel Truck Door Side Hinge with Roller Cover

15.1

Whiting Truck Door Stainless Steel Center Hinge

3002-200FT

Gum Hose 1/2" ID 200' Spool

  • 1/2" inside diameter
  • Installed in bottom "U" rubber for use as a safety edge
200BL

2" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1703
4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4007-8FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4006-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4007-6FT

Aluminum Retainer only for Light Brush 90 degree***Actual Length 6'1"

  • For angle application (90 degree).
  • For use with Light Brush or Vinyl Insert.
4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1015-1-3/4-10'

Rigid Vinyl Bottom Retainer Raised Centre 10' Long

  • Black - for door thickness of 1-3/4"
1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

  • For door thickness of 1-5/8" to 1-3/4"
1006-1-3/4-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1005-1-3/4-24'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4" • DIE # ES18191
PATCH_6X12

Truck Door Aluminum Trailer Patch 6" x 12"

  • Adhesive back adheres to a wide variety of material easily covering holes or other blemishes on trailers.
  • Forms a shock resistant watertight seal.
  • Painted white
371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz

  • Visor clip and 3V lithium button cell (CR2032) battery included.
371LMC Manual
DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

  • Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
  • Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
  • 8-dip switch 64 selectable codes
  • Same as: DNT00027B or DT4A
  • 310 MHz frequency
Programming Instructions
1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

  • For 2" thick doors.
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
1104-8FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 8' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-14FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .2187 - .3065
24-HWB-PAIR

Winding Bars Hex 24" Set of 2

  • Cold rolled hardened steel.
  • Hex shape keeps the bar from rolling away.
  • Machined to 1/2" at one end with a 5/8" outside dia. on the other end
  • Sold as a pair.
18-HWB-PAIR

Winding Bars Hex 18" Set of 2

  • Cold rolled hardened steel.
  • Hex shape keeps the bar from rolling away.
  • Machined to 7/16" at one end with a 1/2" outside dia. on the other end
  • Sold as a pair.
1104-18FT-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-12FT-SAND

Residential Side & Top PVC Weather-Strip with cap 12' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-8FT-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-18FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 18' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Sold by full case quantity (12)
1104-14FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 14' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
7001-10-WHITE

Commercial Side & Top Weather-Strip 10' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1106-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

  • Aluminum retainer with black dual fin vinyl
1102-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1102-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
32-48-180

Extension Spring 8' Door - 180 lbs Gold ** Replaced by 27-48-180

  • Double - Loop
  • 32" long 48" stretch 180 lb load
  • Springs sold individually
Spec Sheet
32-48-200

Extension Spring 8' Door - 200 lbs Tan ** Replaced by 27-48-200

  • Double - Loop
  • 32" long 48" stretch 200 lb load
  • Springs sold individually
Spec Sheet
32-48-220

Extension Spring 8' Door - 220 lbs Green ** Replaced by 27-48-220

  • Double - Loop
  • 32" long 48" stretch 220 lb load
  • Springs sold individually
Spec Sheet
32-48-140

Extension Spring 8' Door - 140 lbs Blue ** Replaced by 27-48-140

  • Double - Loop
  • 32" long 48" stretch 140 lb load
  • Springs sold individually
Spec Sheet
32-48-130

Extension Spring 8' Door - 130 lbs Yellow ** Replaced by 27-48-130

  • Double - Loop
  • 32" long 48" stretch 130 lb load
  • Springs sold individually
Spec Sheet
32-48-120

Extension Spring 8' Door - 120 lbs Green *** Replaced by 27-48-120

  • Double - Loop
  • 32" long 48" stretch 120 lb load
  • Springs sold individually
Spec Sheet
25-42-140

Extension Spring 7' Door - 140 lbs Blue

  • Double - Loop
  • 25" long 42" stretch 140 lb load
  • Sold individually
  • Same as part number 114
  • Rated for 10000 cycles
Spec Sheet
25-42-120

Extension Spring 7' Door - 120 lbs Green

  • Double - Loop
  • 25" long 42" stretch 120 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-60

Extension Spring 7' Door - 60 lbs Brown

  • Double - Loop
  • 25" long 42" stretch 60 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
412HMC

LiftMaster Single Channel Co-axial Radio Receiver 4 Wire 390MHz

  • 390MHz universal coaxial receiver for Open/Close
  • Will accept 15 remotes on "High Security" or 31 remotes on "Normal security"
  • 8" wire antenna included (part #41C3196)
  • Input voltage 12-24V AC/DC
Programming InstructionsInstructions de programmation
973LMC*

LiftMaster 3-btn Security+ Transmitter 390MHz - DISCONTINUED

  • 390 MHz Secruty+ three button visor tranmsitter
  • Compatible with Security+ systems including Chamberlain Sears Craftsman and Raynor Openers (Safety Signal) manufactured 1997-2005
  • Visor clip and battery included (part # CR2032)
  • Same as 973LM 96LM 953CB 956CB
  • Discontinued 12/31/13 - Replacement options 375LMC 890MAX 893MAX 892LT 894LT
94-00002

Truck Door Clevis Pin 1/4" x 7/8"

  • Zinc Plated finish
  • 1/4" x 7/8"
28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-3
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-1
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White
DM11VL

Cable Drum Vertical Lift 11' 850-11 Pair

  • 11' Vertical Lift aluminum die cast alloy.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
  • Rated Lift per Drum: 425 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1" solid shaft with 1/4" keyway.
    • .......more details
27-20305

Truck Door Balancer Bracket Center for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2525
27-20200

Truck Door Winding Plug for Todco Roll-Up Doors

  • Cast aluminum construction.
  • Provides easy method to adjusting spring tension.
  • Cross Reference: T #59158 T #51041 W #4050 340100
27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

  • Zinc die cast construction.
  • Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
  • Cross Reference: W #2518
  • 2-3/16" I.D.
26-94525

Truck Door Intermediate Panel (15" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-94521

Truck Door Intermediate Panel (11" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

  • Retainer extrusion is constructed of high quality aluminum.
  • Panel mounted retainer
  • Cross Reference: T #69790 500000
26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40040
  • Cross Reference: W #8280
26-14321

Truck Door Bottom Panel with Seal (11" x 98") for Todco Dryfreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
25E10271

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Stud plate for 1 stud
  • Cross Reference: W #1370
25E10051

Truck Door Center Hinge Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Cross Reference: W #15 T #70159
  • Box quantity: 50