Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

SETR2681AM2K

Erone 2-Channel Mini Transmitter 868MHz

MK-00099

Micanan Utility Limit Switch w/Roller (Telemecanique # XCKL115H7)

MM-00334

Micanan Bearing Support Plate for 5HP PRO-GH (Reducer 120)

MW-00057

Micanan Splash Proof Cover Light Duty Fully Assembled

  • Splash proof cover for models: PRO-LJ J LH LHA and GJ
  • Same as MP-00253
ALUM-509

Aluminum 24" x 100' Spool Midnight Surf / Vagues de Minuit # 509

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 509
  • Reverse side is #431 Bright White
.312-514-L

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
PRO-J-5043-U-RH

Micanan 1/2HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
  • .......more details
SPRAY-468

Aluminum Touch Up Spray Paint 350g Nutmeg / Brun Muscade #468

  • 350g can
ALUM-513

Aluminum 24" x 100' Spool Moonlit Moss / Poussiere de Lune # 513

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 513
  • Reverse side is #431 Bright White
TB-20

Molded Rubber Bumper Black 3 1/2" L x 6" W 3 1/2" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Molded Truck Bumper molded in one piece and will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 3 1/2" L x 6" W 3 1/2" Projection
DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 10" L x 4 1/2" W 3" Projection
  • .......more details
LB1010-36

Laminated Bumper Standard Black 10" x 36" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • .......more details
LB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • .......more details
PO17

Overhead Door Bottom Astrigal Rubber for Rolling Steel Doors Sold by the Foot

LA500XL20W

LiftMaster Single Arm Solar Package for LA500 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA500DC)

  • Kit Includes: LA500DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
  • For dual gates order extra LA500DCS secondary arm
  • Updated unit complies with new UL325 code revised Jan 2016
  • Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
A8833-PB

Allstar Replacement Square Push Button Only White Sold Individually

  • Square white button fits Allstar remotes # 8833 8833TC 8833T-OCS
BI-004

Astragal Bottom Cloth Black PVC Sold by the Foot

9004-10

Excalibur Threshold Kit 10'2" x 4" W Solid Aluminum *** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
  • .......more details
MX00034-575V

Micanan Brake Assembly for PRO-HHD with 575V Solenoid (MX00206-575)

  • Complete brake assembly including 575V solenoid - solenoid cover sold separately part #MM00011
6X24SC50

Devanco Loop 6' x 24' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
MK00542

Micanan Emerson Motor Capacitor 1/2HP 110V 324-389uf with Resistor *** No Longer Available

  • For 1/2 Hp 110V operators
PRO-HHD10021U-L

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
TRACK-GUARD-36

Track Guard 36" Tall Safety Yellow With Base Sold as a Pair *** To Extent of Inventory

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5092 (right) and 60-5093 (left) sides
  • .......more details
38C

Skylink 1-Button Universal Remote ***NLA

  • Easy to carry or clip on sun visor.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
MX00137

Micanan PRO-APT Trolley Carriage with Auto Re-Engage Feature (MX00171) *** NLA

  • New part number is MX00171
MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: nominal 30msec.
  • .......more details
MOV001

Manaras MOV Surge Protector

  • For 3-phase commercial operators
  • 680V 1800V CL.V
D22

Allen Bradley 110V Reversing Contactor

9723-48

Whiting Pull Strap 48" with Steel Retainer

  • 48" long
110925

Allstar MVP-QC 3-Btn Quick Code Transmitter 318 MHz *** Discontinued

  • Compatible with all MVP receivers and operators
  • Quik-code programming no dip switches
  • Operate LED
  • Visor clip included
  • Power: Two 2032 batteries
  • Codes: 19683
  • .......more details
G651209P

LiftMaster 10ft PVC Arm Square Yellow/Black Stripes **DISCONTINUED

  • Requires clamp model # G108019 sold separately
  • For use on barrier gate operator BG770
4007-14FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
27-24200

Truck Door Single Torsion Spring Assembly 96/60 for Todco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 96" Spring Length: 60" Wire Size: .243
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
  • Heavy-duty cast aluminum cable drums hold up to 130" of cable
  • .......more details
JY-10

Devanco Solvent & Degreaser 400g

  • General purpose solvent and degreaser
  • Contains natural citrus oils. Cleans oily greasy and dirty surfaces.
  • Dries quickly and leaves no residue.
  • Approved by CFIA.
GD-STEND-21D

End Cap Steel 18G 21" Double 1-3/4"

SP20W12V

LiftMaster Solar Panel Kit 12V 20 Watt

  • Includes mounting bracket and hardware with 10' cable
720118

FAAC Latching Plastic Enclosure

  • Dimensions: 4.65" x 8.38" x 0.6"
TRANSF037

Manaras Transformer 240/208-24VAC 40VA

  • Transformer 240-208V Primary 24VAC Secondary 40VA
WD-309884

Wayne Dalton 3-Btn Transmitter 303 MHz 3910

  • Visor Style (comes with visor clip)
  • Green Indicator Light
  • Size: 2-1/4"" x 3-1/2"
  • Works with Wayne-Dalton Models: Classic Drive: 3012 3016 3512; Quantum: 3211 3212 3213 3313 3412 3413
  • Same as models: 3910 02-3047-3BUH 297132
226-9312

Lithium AA 1.5V Battery

  • Used in IG2 photo eyes
BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

  • Used on old MJH
C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

  • Stamped bearing for lighter loads
  • For a heavier duty machined bearing use R5114
ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
50180

Doorlec Brake Assembly 120V

OSH-6112-CONT-L

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

  • Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
  • 304L rust-resistant stainless steel
  • 12 gauge
109441.0002

Overhead Complete Limit Switch Assembly JST

  • Replaces part number 109441.0001
  • Replacement has 3 limit switches
MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

  • Provides LED visibility on both sides to 17 ft. arm.
CP-LX100

Lynx Control Board with Cover for UL325 models

  • For all voltages
OTH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

  • The OTH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
CP-LX225

Lynx Enhanced Relay Board

MK-00005

Micanan Hoist Disconnect Switch

  • lso know as Cut-Out Switch
S2TR2641E1

Erone 1-Channel Mini Transmitter 433MHz

  • Open/Close remote for 1 door
  • Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
  • Learn button programming
  • Ergonomic stylish design Rugged & durable
  • Light grey base with yellow buttons
  • unobstructed range: 820 ft (250m)
  • .......more details
BK022/PR

Commercial 3" Aluminum Bottom Bracket with Cable Adjustment Sold as a Pair

  • Rating: 2200 lbs max per door
  • Use with: 3" straight track
  • Aluminum bracket with zinc plated hardware
  • Sold as a pair (includes one left and one right).
50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

  • Five feet long.
  • OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
  • The weight of the vehicle compresses an electric switch which sends an open signal to the door.
  • Requires a 2-wire connection to the operator but does not require power to function
ME123-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
1104-8FT-CLAYST

Residential Side & Top PVC Weather-Strip with cap 8' Long - Claystone

  • Claystone rigid vinyl retainer with claystone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
27-48-100

Extension Spring 8' Door - 100 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 100 lb load
  • Sold individually
  • Rated for 10000 cycles
H12G04-SS

Hinge #4 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

SLT17-20

Rolling Steel 2" Flat Slat 20-ga Galvanized

LD-11B

EMX Base Socket 11-Pin DIN Rail Mountable Black Block Style

  • For use with D-TEK detectors
  • Special Order Only
  • Narrow profile
GH203-L5

LiftMaster Gearhead with Brake 2 HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
.363-3-3/4-RH-C

Torsion Spring .363 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 3-3/4" Length: 12 ft
.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 3-3/4" Length: 12 ft
.234-2-5/8-LH-C

Torsion Spring .234 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2-5/8" Length: 12 ft
.225-2-LH-C

Torsion Spring .225 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2" Length: 12 ft
BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

  • Universal spring anchor brackets - Residential/Commercial
  • Centerline adjustment: 3-5/16" to 6-3/4"
  • Bright zinc plated 8 gauge steel
  • No bearing
  • Bearing R5110 sold separately
OSH-6533-CONT-R

Manaras Opera-SH 3/4 HP 600V 3 Ph with Mechanical Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
BK310

Jamb bracket J-10 #10 12 gauge

  • Sold by the piece
  • Height 4.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

  • Actual length is approx. 16'-1"
OGH-6432-ECB

Manaras 1/2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
SHAFT017

Manaras Spacer for Trolley Tracks

16-5L300

LiftMaster Cogged Vbelt 5L 30"

PPWR

LiftMaster Passport Receiver with Sec+ 2.0 Technology

  • LCD Menu Screen streamlines programming for easy set-up of facility codes and bit format.
  • Compatible with all Standard Wiegand Protocols providing control for the security and access of your property.
  • IP44 Rated Housing designed for outdoor environments.
  • Designed for outdoor environments
  • Can be programmed with 1- and 3-Button remote controls offering a variety of solutions to fit your specific application needs
Z9220

Pocket Style Res / Com Combo Spring Gauge

  • Includes wire sizes .1875 thru .5
  • Double saw-tooth leaves for easy wire measuring
  • Stainless steel
  • Includes belt sheath
27220A

Genie Limit Switch Chain Drive

  • Compatible with the following operators: PMX700 GPS700-IC PMX1200 GPS1200-IC PMLD500 PMX500-IC/B PMX300-IC/B IC250/B PMX60-65-70-75-80-85-300IC-500IC-IC250 among others
  • For chain drive models with internal limits
GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

  • Includes CPS-U photoeyes
831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • .......more details
MK-00719

Micanan Replacement Antenna for On-Board & External Receiver

  • Approx. 8" long
776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

  • 1/4" bolt has 7/16" head
  • Max torque = 6
  • Full thread
  • Grade 5
CBS-338

Center Bearing Support 3-3/8" 8-gauge with Bearing Sold per Piece

  • Heavier gauge allows for use in both 2" commercial or 3" industrial applications
  • Sold per piece
  • For 1" shaft
  • Double clipped ends
K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

  • For models T APT SD & GH 1/2 HP - 2 HP models L5
CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
MOFR-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Receiver

  • Maximum sensing range is 20 meters
  • 11-Pin
  • 8 inch optical beam angle.
  • Waterproof for harsh environments i.e. water dust steam etc.
  • To be used with amplifier series S142
  • Supplied with 15 m of shielded cable.
  • .......more details
K75-10177

LiftMaster Brake Hub Assembly

  • Assembly includes: Brake hub set screw push-on fastener and feather key
21-10298

Transformer 100VA

  • Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
  • Fused at 5A
TH827-12V

Erone 7-Day Timer 12V

  • 12V AC/DC input voltage with battery back-up
  • Form 'C' relay
  • Easy to read LCD Display
  • Manual override button
  • Ideal to keep a gate open during the day
ARK

LiftMaster Auto Reconnect Trolley Kit

25-10301

Truck Door Heavy-Duty Cable Anchor Bracket Black for Whiting Roll-Up Doors

  • Steel construction
  • Allows proper rotation of cable head
  • Cross ref: Whiting 5803
CR-2000

EMX Keypad/Card Reader Waterproof 5401-1

  • Back-lit keys for nighttime operation
  • 2000 users (card or passcode)
  • Rugged waterproof design and vandal resistant
  • 9-24 VDC
  • Tamper alarm
  • Door call button
  • .......more details
RS1029

Roller 2" Steel 9" stem- WL 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 9.5" Overall Length: 10.5"
  • Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)
MH00099

Micanan Bearing

  • Fits PRO-APT and PRO-HHD
  • Requires 2 per shaft
  • 3/4" Bore
.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED