Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
33950S

Genie Down Limit Switch Assembly 138 " Wire

  • Magnetic limit switch for down direction.
  • The limit wire is moulded into the limit.
  • For Genie Excelerator Screw Drive garage door opener models: PRO99-IC CMD9900-IC ISD990-1 ISD990-2 ISD1000-2
773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
19792B

Genie Replacement Door Bracket Zinc

  • Universal door bracket to connect door to door arm
  • Same as 19792A04
375UT

LiftMaster Universal 2-btn Transmitter Next Generation

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • Visor clip and battery CR2032 included
Programming InstructionsInstructions de programmationSell Sheet
SN1150050

LiftMaster Main Processor Board for MiniKey

797

Fasteners Clevis Pin 5/16" x 1" 100/Bag

802

Fasteners Sleeve Anchor 3/8" x 1-7/8" 100/Box

  • Secure anchoring into concrete brick or block
801

Fasteners Sleeve Anchor 5/16" x 1-1/2" 100/Box

  • Secure anchoring into concrete brick or block
18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

  • Gearbox for GH operator
LA500DC

LiftMaster Primary 24VDC Actuator Arm for Single Gate Applications New Model

  • Replacement actuator arm for single gate applications
Installation ManualManuel d'installationSell SheetBrochure
OPH-6112-CONT-R

Manaras Opera-H 1/2HP 120V 1Ph with Mechanical Contactor Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
109099

LiftMaster Flat Wall Plate Mounting Bracket

  • Heavy 1/4" steel plate bracket used for wall mounting of side-mount operators.
  • Slots in back allow for tensioning of drive chain.
  • Mouting studs match up with mounting holes of LiftMaster Models DJ DH J MGJ H and GH operators.
1A4324-EZ

LiftMaster Steel Hood EZ Mount Bracket with Adaptor Plate (75-12362/ 001A4324)

  • Heavy-gauge steel bracket with EZ mount adapter plate mounting bolts nuts and washers.
  • Adapter plate holds mounting bolts in place for ease of mounting.
  • Cannot be used with Model GH 3HP.
37408

Doorlec Reversing Contactor BF9 120VAC

MA022

LiftMaster Arm Bolt

  • For use on Mega-Arm gate operator
  • Sold individually
  • 5/16-18 x 29" hex head
MA025

LiftMaster Padded Barrier Arm Yellow 12ft

  • For use on Mega-Arm gate operator
Additional arm accessories
831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming Instructions
Q404

LiftMaster Omni Siren K29-50279 **to extent of inventory

754

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" (#4PT) 1000/Box ** NLA Offer 108207

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
IPAC

LiftMaster Internet Enabled Outdoor Access Control System with VoIP Technology

  • LiftMaster® IPAC (Internet Protocol Access Control) is the first Internet-enabled outdoor access control system with Voice-over Internet Protocol (VoIP).
  • By harnessing the power of a high-speed connection IPAC’s innovative technology allows you to work smarter and more efficiently and its contemporary design features a durable enclosure which enhances your property’s image.
  • Make updates 24/7 through an IP address (no software to install) so you never have to take IPAC offline.
  • Manage resident info from any browser on your LAN so you do not physically visit the unit.
  • VOIP technology eliminates long distance fees and will be replacing old analog phone lines.
  • 50000-resident capacity so you’ll never run out of system memory.
    • .......more details
Installation ManualSell Sheet
3X6SC50

Devanco Loop 3' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
BT505L5

LiftMaster 1/2 HP 575V 3p Commercial Trolley Operator with a Brake Logic 5

  • Low profile trolley operator with brake installed
  • Comes with #48 roller chain
Installation ManualManuel d'InstallationSell sheetBrochure
7001-9-BLACK

Commercial Side & Top Weather-Strip 9' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

  • 7/16" head
7001-7-BLACK

Commercial Side & Top Weather-Strip 7' Long - Black 7001-BB (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

  • Full length thread
  • Max torque = 6
756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

  • Knurled shank
  • Max torque = 6
786

Fasteners Hex Nut 1/4-20 1000/Box

788

Fasteners Hex Nut 5/16-18 1000/Box

794

Fasteners Keps Nut 5/16-18 1000/Box

  • Lockwasher & nut combination
784

Fasteners Serrated Flange Nut 1/4-20 1000/Box

  • Serrated flange face to provide locking
776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

  • 1/4" bolt has 7/16" head
  • Max torque = 6
  • Full thread
  • Grade 5
774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 2/Grade 5 depending on availability
23-2016

LiftMaster Limit Switch

  • Limit Switch for the VSL595
41A5389-1E

LiftMaster Receiver Logic Board

  • For low profile screw drive models with one light
  • Fits models 2110 2220
Replacement Instructions
Q400MAU

LiftMaster Relay Module

5X10SC50

Devanco Loop 5' x 10' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
SSZP17-1

Solid Shaft 1" Keyed Zinc Plated 17'-1" ** to extent of inventory

SSZP5-6

Solid Shaft 1" Keyed Zinc Plated 5'-6"

SSZP6-6

Solid Shaft 1" Keyed Zinc Plated 6'-6" ** to extent of inventory

029C98200-PRIMR

W-Style Complete Repl. Door Primer only

  • Primer only no stainless steel package.
  • For doors upto 98" wide x 100" h
  • Fully assembled door manufactured to exact size with all tracking and spring operator assembly
  • Price varies according to size
19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

  • Chain pack only
75-10174

LiftMaster Trolley- Front Idler Assembly

  • Also known as: 7510174 305115018 711150181 175017 71115211 75-10174
751

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) 1000/Box

  • 7/16" Head
  • Indented hex washer head
  • Max RPM = 2000
772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
K72-12515-1

LiftMaster Limit Switch Kit

  • For models T H Logic 5 and various L3 L4 commercial operators
  • Also known as: K75-12515-1 K75-12514
178B34

LiftMaster Straight Door Arm

  • Will work with most residential garage door openers
  • Also known as: 012385041783 178B33 178B34 4178B0034B
ME123-BLK-END

Miller Edge Black End Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
719323

FAAC Steel Rack for Model 844 Operator

OTBH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
IS-3

Interlock Switch for Rolling Steel Doors / Grills

  • Prevents the control of the operator when the door is locked.
  • The switch is a normally closed contact which is connected to the operator interlock terminal.
165-B

Fusible Link For Loads 1 to 10 lbs

  • Length is 1.4328" width is .563"
  • Distance between center is .938"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
37024R

Genie Rail Extension Kit for 8' Doors GBLX-8***No longer available***

  • Compatible with Quiet Lift 800 DC Belt Drive models.
  • To be used in addition to a 7' (3-piece) rail to accommodate an 8' high door.
CONSD24V

Reversing Contactor Struthers Dunn 24V

  • Struthers-Dunn # A275KXX90
TLS1CARD

LiftMaster Option Board for L4 L5

  • Works in conjunction with Logic 4 & Logic 5 to provide seven field-selectable modifications
  • Including six door traffic control options
  • A means to connect External Open & Close limits by using a selectable DIP switch
  • Controls both 24V & 110V traffic lights
  • Formally known as RDGRNCARD
Installation Manual
71-REDGRN-HCT

LiftMaster Red/Green Warning Light Box **DISCONTINUED

  • Signals if door is moving or stationary
  • Compatible with model HCT
Installation Manual
SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

  • Red and Green LED traffic light
  • Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
  • 24 volt DC input voltage only
  • Long lasting low power consumption
  • A simple reliable and cost-effective way to reduce accidents around the loading dock.
  • Available in two colors: safety yellow or black.
    • .......more details
Installation InstructionsInstructions d'installationWiring DiagramSchéma de connexion
8FT-BELT-LDO

Linear 8ft Belt Drive Rail for LD050/LS050/LDCO (HBT8C)

  • 8ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
8FT-CHAIN-LDO

Linear 8ft Chain Rail for LD050/LS050/LDCO (HCT8C)

  • 8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
7FT-BELT-LDO

Linear 7ft Belt Drive Rail for LD050/LS050/LDCO (HBT7C)

  • 7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
7FT-CHAIN-LDO

Linear 7ft Chain Rail for LD050/LS050/LDCO (HCT7C)

  • 7ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

  • Fits all HDC operators - waterproof or not.
423LMC

LiftMaster 3-Channel Co-Axial Receiver 390 MHz

  • 8" coaxial antenna included
  • Used for open/stop/close on commercial motors
  • N/O and N/C selectable
  • Compatible remote: 33LM
Installation ManualManuel d'Installation
65853

Marantec Programming Wire - Old ML to New M3

  • Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.
MU22-2WIRE-RH-B

Miller Edge MU22 2-Wire Right Hand Black - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
MU22-2WIRE-LH-Y

Miller Edge MU22 2-Wire Left Hand Yellow - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
MU22-2WIRE-RH-Y

Miller Edge MU22 2-Wire Right Hand Yellow - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
990LM

LiftMaster Surge Protector ** NLA

Installation ManualManuel d'Installation
11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

  • Used on slide gate operators using #50 chain.
  • Also referred to as adjuster bolts
MK00736

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored ** use MK00641-NM

  • For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
  • Board has 5 relays
Instructions Manual
CR-2000

EMX Keypad/Card Reader Waterproof 5401-1

  • Back-lit keys for nighttime operation
  • 2000 users (card or passcode)
  • Rugged waterproof design and vandal resistant
  • 9-24 VDC
  • Tamper alarm
  • Door call button
    • .......more details
Instruction ManualSpec Sheet
CB18A0500

Cable 1/8" 7x7 500' Galvanized

  • Galvanized cable 1/8" 7x7 500ft spool.
Comparison charts
SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

  • Actual length is approx. 9'-1"
SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

  • Actual length is approx. 7'-1"
M18

LiftMaster Remote Control Tester ** NLA

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

  • Same as part number K75-50097
302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

  • The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
  • The 300 MHz frequency is compatible with standard Multi-Code transmitters
  • The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
  • Operates on 12-24 volts AC or DC power
  • Two channels
  • Whip antenna
    • .......more details
Programming Instructions
GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
10-10355

LiftMaster Solenoid Link

TUBE_SHAFT_18FT

Hollow Shaft 1" x 18'-10" Galvanized 14 gauge

TUBE_SHAFT_8FT

Hollow Shaft 1" x 8'-10" Galvanized 16 gauge

109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
    • .......more details
Programming Instructions
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.207-134-L

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
855LM

LiftMaster HomeLink Repeater Kit

  • This kit contains a repeater and a transmitter
  • The HomeLink repeater is only compatible with HomeLink equipped vehicles
Programming Instructions
CB14B0500

Cable 1/4" 7x19 500' Galvanized

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
ER4

Carlo Gavazzi Reflector 3-1/4" (84mm) Round

  • Can be used with the PMP12RI retro-reflective detector
  • Can be used with the reflector hood
  • Dimensions: 84 mm wide 7.4 mm thick
ME123-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
TUBE_SHAFT_17-STL

Hollow Shaft 1" x 17'-0" Steel 13 gauge

  • When ordering order one foot longer than actual door width.
813LM

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0 ** To extent of inventory

  • Encrypted DIP style three-button remote control with Security+2.0 technology
  • Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
  • Easy to code 12-position DIP switch offers up to 4096 codes
  • May also be programmed for Open/Close/Stop functionality
  • Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
  • Compatible only with Security+ 2.0â„¢ commercial receivers and operators
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

  • This innovative monitor lets you check and close the garage door or gate from any room in the house.
  • Green and Red LED lights indicate whether the garage door or gate is open or closed.
  • Volume controlled audible alert lets you know when the garage door or gate is being opened.
  • Able to monitor and close up to four garage doors or gates.
  • Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.
Programming InstructionsInstructions de programmation
825LM

LiftMaster Remote Light Control Sec+ 2.0 ** To Extent of Inventory

  • Operate any lamp with your garage door opener remote control.
  • Operate from your computer or smartphone by using the Liftmaster Internet Gateway.
  • Compatible only with Security+2.0 garage door openers and MyQ technology accessories.
Programming InstructionsInstructions de programmation
71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

  • omplete disk brake assemble including 2-wire solenoid
Installation Manual
71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
  • Includes solenoid
Instruction Manual
71-B240H

LiftMaster Interior Brake Kit with Cable 230-460V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
Instruction Manual
41AC075-2S

LiftMaster Circuit Board Assembly for Single and Double Capacitor Models 315Mhz

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
23-2017

LiftMaster Limit Switch SPDT

24-24-2

LiftMaster Relay 24VAC 8-Pin DPDT