Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
GALV-283-258-144-R

Torsion Spring .283 x 2-5/8" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-334-144-R

Torsion Spring .262 x 3-3/4" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
2376.162.18.960

Whiting Torsion assembly .162 wire size 18" spring length 96" shaft

MAGCRD-25

Linear Magnetic Striped Cards Sold in Pkg 25 *** To Extent of Inventory

  • Magnetic striped cards
  • Track II encoded
  • Low-CO magnetic stripe
  • Sold in lots of 25
  • Same as: 0-200025
2200-207

Linear Double Pulley 2" 5/8" Bore HSLG

K72-12510

LiftMaster Limit Shaft Kit T commercial operators

  • Service kit for standard T commercial operators
15-50B16LGH

Sprocket 16 Teeth 1" Bore 1/4" Keyway w/SS

2100-529

Linear Woodruff Key #15 1/4 x 1"

2400-407

Linear Ste Screw Brass Tip 5/16-18x5/16

GH4416-50

Green Hinge 5-Panel Commercial System Set

  • The Green Hinge System provides a close tight seal of your door to your building eliminating gaps and saving energy and money!
  • Patented spring-loaded garage door hinge system that allows automatic adjustment of the overhead garage door closing up to 1/4in side gap
  • Reduces dirt dust bugs rain & moisture
  • Quick and Simple installation
  • Fits Residential & Commercial Doors
  • 100% Made & Assembled in the USA
    • .......more details
ADAPTER008

Manaras XPL-P16 Thread Bushing

SHAFT064

Manaras Limit Shaft 5/8"-24x12.5

MA024-10RDOT

LiftMaster Articulating Aluminum Arm 10ft x 3in w/Reflective DOT Tape (Hardware Kit NOT Included)

  • For use on Mega-Arm gate operator
  • Hardware kit MA033 NOT included
  • Red & White Retro-Reflectorized DOT Tape
15055

Doorlec Electronic Thermostat 330V B1 Metal

2100-669-UPS

Linear Hub Clutch Cast Ir Pinned UPS HSLG

GH-353-3

Doorlec Industrial Gearhead Door Operator 3HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
MT21-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Yellow Left Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
15591

Doorlec "C" Clip 5/8"

26141

Doorlec Cam Shaft 9-1/4" x 5/8" (24 x 1.59cm)

  • Fits the older smaller boxes
2BXT

Exterior 2-btn O/C Nema-4 Pushbutton Control Station Non-Metallic

  • Surface mount
  • Non-Metallic
  • Open / Close
CCTD-04

Fuse 600VAC/300VDC Class CC Time Delay 4AMP Sold per Fuse

  • Sold per fuse
K94-37849-1

LiftMaster Electric Motor 1HP 3-phase

  • Replacement motor for SL595103U and SL595103UL
GALV-312-334-144-R

Torsion Spring .312 x 3-3/4" x 12ft RH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" RHW Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-225-258-144-L

Torsion Spring .225 x 2-5/8" x 12ft LH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-363-6-144-L

Torsion Spring .363 x 6" x 12ft LH Galvanized Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-334-144-L

Torsion Spring .295 x 3-3/4" x 12ft LH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-363-6-L

Cut-to-Length Torsion Spring .363 x 6" Left Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-363-334-R

Cut-to-Length Torsion Spring .363 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound Galvanized White/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Galvanized Yellow/Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K29-PB125

LiftMaster Reversing Motor Controller 115V KBPB-1

TRACK004

Manaras 1 Piece Galv Track 2x2x14'6 ** 1 pc Only

  • 2 pices are required to make 1 set of tracks
  • Does NOT include the chain
O02R2401

AirLift Op. Retaining Rod Complete 8ft Std Op. ** Price by Quote Only

OSH-6212-M-N1-RH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
XLSOLARCONTUL

LiftMaster Solar XL Control Box Battery/Harness Not Included

  • Includes LMRRUL Retro-Reflective Monitored Photoeye
  • Compatible with LA400 LA412 LA500
  • Does NOT include the battery or harness. A12330SGPLK sold separately
7-6111

RW Hanger 323S Truck & Pendant Sold Individually

  • Size: 323S
  • Truck: Same as 323 Hamger
  • Pendant: 1/2" diameter Steel Zinc Plated
  • Fasteners: (1) 5/8" washer (1) 1/2" hex nut (1) 1/2" locking nut
  • Capacity: 1 pair for maximum door weight of 400 lbs
  • Shipping weight: 1-1/2" lbs
    • .......more details
E/BLOP/121

Automatic Systems Option 1 Kit 2 LED Lights on Arm

  • Increases visibility of the arm on BL229 gate operator
50690-2

Doorlec Clutch Assembly for ETBH w/Double V-Belt

GALV-234-2-144-L

Galvanized Torsion Spring .234 x 2" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2"
  • Length: 12 ft
NO_REFLECTOR

Garlo Gavazzi No Reflector Required

NO_HAR-11

EMX Detector Only No Wiring Harness Included

DHJ751L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Left Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
CG-HOIST-DBLE-114

ControlGard Chain Hoist Double Compound 1-1/4" Bore

  • Cornell Double Compound hoists are designed for larger doors
  • Features an integral braking system that only moves when the user is actively pulling the chain
CGH753L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod 3/4 HP 208/230/460V 3P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
LEDSTRIP006

LED Light Strip (1 Unit) Red/Green/Blue 120" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
Installation Manual
CB14-KOR-PER-FT

Cable 1/4" 7x19 Galvanized Supreme Sold per Foot

  • Galvanized Cable 1/4" 7x19.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
  • Sold per foot anything over 2" is rounded up to the next foot.
    • .......more details
OSH-6533-M-N1-RH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
PHOTO-076

Manaras Reflector 2" x 2" For Use w/ PHOTO-075

GDI-LG920

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
PD1614B000

NICE Aluminum Flange Bar 300MM Insert For MBAR up to 7M

DISCONNECT008

Manaras HDW Brake Release MTBH

OTBH-6112-M-N1

Manaras Trolley Operator 1/2HP 120V 1Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
  • Includes PHOTO-070
    • .......more details
89029.0040

Todco Carriage Bolt SS 1/4-20 x 1-1/4" Splined

P-8866TC-OCS

Pulsar 6-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • OPEN-CLOSE-STOP 6 doors
  • 8 dipswitches 318 MHz
Programming instructions
K07-8063

LiftMaster Upper Crank BG790

  • Also known as: 07-8063 078063 G078063
BCSI-PM14

Pivin Drapeau Belleville Washer ** Price by Quote Only

  • Belleville Washer acts as a spring to keep pressure on the Clutch disk
K41-0259-000

LiftMaster Chain Guard IHSL/ INSL24UL

K94-34778

LiftMaster Board to Board Wire Harness 24V

  • For use with various LiftMaster® Swing and Slide Gate Operators and Perimeter Access Solutions
4580-304-KYNAR/GY

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Kynar Grey 458-97 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
HD8460-REPL-KEY

Replacement Keys for HD8460 Random Code 00-99 Sold per Pack of 100

  • 100 key pack numbered 00 thru 99
K41-0073-000

LiftMaster HD Main Control Board

  • Compatible with the following models: HDSL24UL HDSL24ULMC HDSW24UL HDSW24ULMC
2376.182.275.930

Whiting Torsion assembly .182 wire size 27-1/2" spring length 93" shaft ** price by quote only

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
GHX-383-3/4HP-LH

Doorlec Explosion Proof Gear Head 3/4 HP 208V 3PH ECB Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
ME120-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
7-37-11

Barlock Bars and Center Only for 10ft Wide Door No Hardware Bag

  • Includes center and bars (61-1/2") only
  • DOES NOT include the hardware bag
69988.3072

Todco Original Bottom Seal Retainer Reefer Cut to Size ** Special Order Item Price by Quote Only

  • Fits Serial #30662431-1
GAREX-PAINT-BLK

Garex Touch-Up Paint Black

  • 0.5 OZ
5416-2

EMX RAVEN Programming Remote

  • Makes it easy to set up and make adjustments to all key parameters of the RAVEN motion detector while at ground level
  • Remote sold separately
Quick Start Guide
MQ00007

Micanan Spring Pin 1/4" x 2" Long

OGH-6112-MON-RH

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Monitored Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
SMR7620TP5

Telco Thru Beam Receiver M18

  • Supply voltage: 10 - 30 V dc
  • Control Feature: Sensitivity pot. and light/dark switch
  • Sensing range: 20 m
  • Output Status: N.C./N.O.
  • Housing: 18 x 1 Plastic
  • 5M cable
    • .......more details
176282

Replacement Blade only for 3" Safety Bottom Bracket Sold per Blade

  • Replacement Blade only fits models SBB-3 and BK021
  • Sold individually
  • 2 blades are required per pair
24114

Doorlec Pocket Wheel (Hoist) Chain Sold per Foot

  • For various Doorlec ops
MF00044

Micanan Hex Head Bolt 1/4-20UNCx4" Not Full Thread

  • Used on various Micanan operators
  • 1 required per operator
1420-134-WHITE

Elton Commercial Window for Flush Doors 1-3/4" thick 1420 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 19 1/2” x 14 5/16”
  • Cut-out size: 18 3/4” x 13 5/8”
  • Vision area: 16 15/16” x 11 5/8“
  • Different glass options and frame colours are available upon request
    • .......more details
MAREDLED12

LiftMaster Red LED Light Strip 12 ft Long

  • Red LED light strip for MALED12
OSH-6213-CONT-LH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
RGH-6114-MON-LH

Manaras 1 HP 120V 1Ph Rapido Gear Head Op. Monitored ECB Left Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
19-41HL-SS

Half (Offset) Link #41 Stainless Steel

  • For #41 chain
19-60HL-SS

Half (Offset) Link #60 Stainless Steel

  • For #60 chain
50170

Doorlec Adjustable Torque Limiter GT/GH Models 3/4HP up to 2HP Ops

  • Also known as Friction Clutch
EHJX-311-1/2

Doorlec Industrial Jackshaft Op. Explosion Proof 1/2 HP 120V-1Ph

  • Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse.
  • Solenoid Brake prevents coasting and secures the door when closed
  • Explosion-proof (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
C-1520-134-W

Thermal Window 19-1/2" x 14-5/16" Cut-Out for 1-3/4" Cedo Door White

  • For 1-3/4" thick door
  • Model: 1520
  • Frame Size: 20 9/16” x 15 7/16” Cut-Out Size: 19 1/2” x 14 5/16”
  • Cedo replacement frame
167212

Decorative Dummy Solid L-Handle Black Sold per piece

  • Zinc painted black powder coated with crinkle finish
  • No rotation
  • Blind mount
MG020-Y-2E-P/FT

Miller Edge Sensing Edge Yellow 2-Wire End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
GH-353-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
GH-343-3/4

Doorlec Industrial Jackshaft Door Operator 3/4 HP 460V 3-Phase

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
GH-311-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 115V 1-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
19-5816

LiftMaster Trolley Chain Pack #48 for 16ft Door

  • Chain pack only
GT-100A

Skylink Garage One Receiver Rolling Code ***To Extent of Inventory

  • Automatic door closer: Never forget to close your garage door again.
  • Built-in timer from 2 minutes to 20 minutes will close the door automatically.
  • Audio warning when door is about to close.
  • Kit includes: Monitor Sensor model: GS-101 and Reciever GC-433R
  • Advanced Rolling Code Technology
  • Replaces your traditional wall button with Wall Console
    • .......more details
SHAFT072

Manaras Input Shaft for MLH 5/8"-18

684-33-102

Universal Bracket 2.25" x 2.5" x 144" w/ Plate 12"x12"

CAPXLTK

LiftMaster Trim Kit and Back Kit

  • Trim ring and back box for CAPXL.
  • Conceal openings left from other systems in flush-mount Infinity L and Icon installations.
  • Dimensions: Outer Trim – 23.75” x 19.375”
BCH751L5R-BZ

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
OTBH-6232-AM-ECB

Manaras Trolley Operator 1/2 HP 208V 3Ph Monitored Elect. Circuit Board Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain