Devanco Canada - Get The Right Garage Door Opener‎ and Parts

38072020

Tie Down Chain Assembly GR 70 5/16" x 20' Hook / Hook

Boron manganese steel heat treated chain
Hook on both ends
WLL LBS : 4700

MT-2B

Linear 2-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery

.......more details

PBT-3

Exterior 3-Btn O/C/S Control Station Nema 4 Metal Enclosure

Surface mount
Metal enclosure
Not CSA approved
Dimensions: 6" H x 2-3/4" W x 3-1/2" D

92-00005

Truck Door Hex Nut 5/16"-18

Cross ref: W #10.1033.2 for both #2376 & #7176 balancers

LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

.331-514-L

Cut-to-Length Torsion Spring .331 x 5-1/4" Left Hand Wound Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

.331-514-R

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

5-36-7

2" Vertical Track 14-GA 12'-4" (13' door) Sold per Pair *** NLA

732

Fasteners Flat Washer 3/8" SAE 1" OD Zinc 1000/Box

7/16" ID x 1" OD x 5/64" thickness (ID: 0.4375’’ OD: 1’’ THK: 0.084’’)

2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

SOLID_SHAFT_13'

Solid Shaft 1" Keyed 13 ft Galvanized

Actual length is approx. 13'-1"

FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
All hardware is heavy-duty 12 ga material
Kits are configured for up to 2" door thickness. Other door thickness are available by request.

346

Cable Clamps Galvanized 3/16" Sold per piece

Galvanized malleable cable clip

5001-7-BLACK

Residential Side & Top Weather-Strip 7' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

1104-9FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 9' Long - Light Bronze (F)

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-10'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 10' Long - Light Bronze (F)

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-8FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 8' Long - Light Bronze (F)

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

07-8058

LiftMaster Crank Link BG790

HTR-460

LiftMaster Heater Kit for AC Pad Mount Gate Operators 460V Only

Heater kit for pad mount 460V AC gate operators.
Includes transformer
Battery bracket NOT included.
Protects system to -40° F and installs on operator frame

Q084

LiftMaster Cam Lock and Keys HCT K80-50142

Same as K80-50142
Fits model HCT
Comes with 2 keys

GL-12-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 13.5" long Sold as a Pair *Discontinued*

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
12 LEDs per guide light

.......more details

BK028/PR

Commercial Light Duty Bottom Bracket 2" Track 13-g BB-90 Sold as a Pair

For 2" track with 7/16" diameter stem rollers
Milford pin cable attachment
For 1-3/4" doors
Size: 8" tall x 3" wide
Includes 1 left and 1 right hand bracket
BB-90 MPL

.......more details

WD-309884

Wayne Dalton 3-Btn Transmitter 303 MHz 3910

Visor Style (comes with visor clip)
Green Indicator Light
Size: 2-1/4"" x 3-1/2"
Works with Wayne-Dalton Models: Classic Drive: 3012 3016 3512; Quantum: 3211 3212 3213 3313 3412 3413
Same as models: 3910 02-3047-3BUH 297132

Programming Instructions

PBTL3-RED

Replacement Button Only - N/C Stop Red

Stop switch and rubber cover for PBTL-3

3228.1

Whiting 2" Nylon Roller 3" Shaft Stainless Steel *** To Extent of Inventory

This is a Whiting original roller

K75-10259

LiftMaster Track Spacer Assembly

Standard duty trolley operator part

41A6569

LiftMaster Safety Sensor Mounting Kit

Replacement brackets only for 41A4373A safety eyes

1003-4-DF-CUT

Bottom U-Rubber 4" Dual Fin Black Sold per Foot

Sold in cut lengths per foot.
Dual fin

HBS2UD

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Double End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (4) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 1-5/8"-2" Doors
Fits 2" or 3" Track
Double End Stile
Pins and Cotters

.......more details

82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

Shoulder Bolt
For SW470-S3
Formerly 82SB5008 G82SB5008

TL-50ML-BLUE

Threadlocker Blue 50ML *** Price by Quote

Medium strength
This product cures fully in 24 hours and can be dissembled with hand tools.
This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
For metal to metal applications only

MM-00057

Micanan Wall Mounting Bracket (GH reducer 50/70)

02-108

Push Button Station 3-btn O/C/S Flush Mount Stainless Steel Faceplate

Nema 1
Standard 2X4 electrical junction box with stainless steel faceplate
OPEN/CLOSE/STOP allows complete control of the door

MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

Designed for use on rolling sheet doors.
It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
Floor level disconnect
24V NEC Class 2
Wiring is factory present to C2 mode

.......more details

Installation manual Sell sheet

7019195

FAAC 400 Screw Long Carte

7220355

FAAC 400 Front Fitting

65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

11202

Doorlec Cap Screw 1/4"-20 x 4"

BRACKET003

Manaras Disconnect Lever Bracket MJ

MGS20-B-2U-05

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

9291644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones LHW

PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
304L rust-resistant stainless steel
12 gauge

S142BRNN924

Carlo Gavazzi Amplifier 24V

Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
11-pin circular plug for easy connection.
8A SPDT relay output NPN/ PNP transistor output or alarm output.
Diagnostics for sensor test during operation.
Alignment help via LED or alternation of alarm output.
Level indication for dirt accumulation.

.......more details

41A2770-17

LiftMaster Hardware Kit for 8550 8160W

Universal Hardware bag for LiftMaster 8550 8160W Operator.

K20-1050B2LPH24

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 5

Standard 1/2 hp motor for new L5 operators

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

An original Whiting assembly

8087.225.310

Whiting .225 x 2-5/8 IN x 31" Curbside with Cones

An original Whiting assembly

ST-PROFILE

Soft Touch Profile Sold per Foot

Yellow air-wave edge
Fits most standard 1-5/8" retainers
300 feet in a roll

601332.0001

Overhead Sprocket 14T 1/4P x 3/8D

Fits Overhead JST drawbar model
Sprocket attaches to the limit shaft

072017.0001.S

Overhead Travel Nut for RCH

Teflon travel nut

26966A

Genie Idler Pulley for Stealth Chain Drive

Fits Genie Stealth model
1/4” bore
Channel style rails

PBS3-RED

Replacement Button Only - Red

Replacement button for 02-403P

H101L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Left Hand W/Brake ***No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

MI00003

Micanan Pocket Wheel for PRO-H/HB/LH

Comes with 3/4" bushing and 2 1/4" spring pins

10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

MOD064C

Manaras Trolley Hoist Kit #410 Chain for OTH

Modification when purchased with an operator
#410 CHAIN WITH FRONTIDLER ASSY
CHAIN HOIST ASSY
HOIST KIT FOR TROLLEY HOIST CHAIN

Drawing

OSH-6233-CONT-R

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

OSH-6112-CONT-R

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
Compatible with DJ J operators

9150000620

3/32" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

K20-1050B-2P

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for BG770 BG790
Same as 20-1050B-2

1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

1007-1-5/8-10

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 10'1"

For door thickness of 1-5/8" to 1-3/4"

7001-WG-16-MO

Residential Wood Grain Side & Top W/S Medium Oak 16' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-9-MO

Residential Wood Grain Side & Top W/S Medium Oak 9' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

6X20SC50

Devanco Loop 6' x 20' Saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

PLATE084

Manaras Plated Brake Plate for OSH

Plate only

.295-134-L

Cut-to-Length Torsion Spring .295 x 1-3/4" Left Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MB-01102

Micanan Electric Motor Only 1/2HP 230/460V 3PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

5001-10-CHARCOA

Residential Side & Top Weather-Strip 10' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

SBPFL205-16

Pillow Block Flange Bearing Football Style 1" Bore SBPFL205-16

MAW123-BLK-RH

Miller Edge Air-Wave Edge Black Sold per Foot

This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.

MJ00004

Micanan Clutch Plate Aluminum 3/4" ID

50346

Doorlec Electric Switch and housing for Mechanical Edge

27-20114

Truck Door W-Style Spring Assembly Curbside RHW 35" Long

Wire thickness: .187
Assembled Spring length: 35 inches long
Inside diameter: 2 3/16"
Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.

1003-3"-PER-FT

Bottom U-Rubber 3" Black Sold per Foot

GH4416-06-L

Green Hinge #6 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-03-L

Green Hinge #3 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-04-R

Green Hinge #4 12-ga Right Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-01-L

Green Hinge #1 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

500 users (proximity badges and/or codes)
3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C door relay output (3A/125V)

.......more details

Programming Instructions Instructions de programmation Sell Sheet Wireless System Chart

41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

With end-panel
Also known as 41A5507 41A5507B

27-48-300

Extension Spring 8' Door - 300 lbs Tan

Single - Loop
27" long 48" stretch 300 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-160

Extension Spring 8' Door - 160 lbs Brown

Single - Loop
27" long 48" stretch 160 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-170

Extension Spring 8' Door - 170 lbs Orange

Single - Loop
27" long 48" stretch 170 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-120

Extension Spring 8' Door - 120 lbs Green

Single - Loop
27" long 48" stretch 120 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-110

Extension Spring 8' Door - 110 lbs White

Single - Loop
27" long 48" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

K94-36411

LiftMaster Piezo Alarm

For LA400DC

MOTOR255-WIRED

Manaras Electric Motor 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator has electronic circuit board or if it is hard-wired •This item is compatible with BRAKE011

MP00020

Micanan Up-Charge Track and #41 chain for 20' h Door *Actual length 270"*

For 3/4 HP and 1 HP operators only

MP00016

Micanan Up-Charge Track and #41 chain for 16' h Door *Actual length 222"*

For 3/4 HP and 1 HP operators only

SL532-ZP-COPPER

Zinc Plated Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST532COP. Stops are not zinc plated

SN1600341-K

LiftMaster Sentex Bypass PCB for TAC1 EL25

BY PASS Board for 1150051
Same as KSN1600341B

MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

.......more details

Installation Manual Sell Sheet

H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

H753L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Right Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details