Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

PRO-GH-5011U-L

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • .......more details
31375

Doorlec Coupling Sprocket 50B23

41A3588-1

LiftMaster Belt Idler Pulley and Bracket (Built Years Pre-2000)

  • €¢This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers.
  • Works on models 1270. 1280 & 1280R
.283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
SBX-N1-P-5011JH

Micanan Control Box PRO-H

  • Dimensions: 11" x 8" x 5" h
FD165C

Electric Motor Only 1.5 HP 110V 1Ph 56C Flange

TRACK-3"-RAW-24

Raw Vertical Track 3" 24'-0" Sold per Piece

12577

Doorlec Clutch Disc Fiber 1 1/2" (3.75 cm)

  • Fits model SGP
PPLK1PH-10

LiftMaster Passport Lite 1-Button Mini Proximity Remote with Sec+ 2.0 Technology 10/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0â„¢ Gate Operators
  • Keychain remote control sold in a 10 pack
  • .......more details
MK00708

Micanan Varistor Harness 230V with Blue Wires

CPS-UN4G

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4 Black

  • Waterproof photoeyes.
  • Monitored Thru Beam Photocell
  • For direct connect on HCT
MX00203

Micanan Complete Control Box Only for PRO-HHDU/TU Nema 1 110V

2376.177_27.850

Whiting Torsion assembly .177 wire size 27" spring length 85" shaft

.375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
36196A

Genie Sprocket Saddle

  • Sprocket Saddle for Genie PMX Chain Drive Openers With T Rail
  • Uses # 27191A.S Sprocket ( Not Included)
MX00137

Micanan PRO-APT Trolley Carriage with Auto Re-Engage Feature (MX00171) *** NLA

  • New part number is MX00171
MP00053

Micanan Track and #410 (#48) Chain for 7' h Door *Actual length 114"*

  • For 1/3 & 1/2 HP Micanan trolley operators
MP00087

Micanan Track and #41 Chain for 7' h Door *Actual length 114"*

  • For 3/4 & 1 HP Micanan trolley operators
02-103-FR

Push Button Station 3-btn Surface Mount French Nema 1 Metal Housing

  • PBS-3S
  • Ouvre-Ferme-Arret
  • Momentary contact
  • Metal enclosure
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
  • .......more details
MP-00037

Micanan Hand Crank for Gearhead Jackshafts PRO-GH PRO-GHC

  • Provides for hand crank operation in lieu of hand chain and pocket wheel
PRO-H-5011U-LH

Micanan 1/2HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL14COP
MD00020

Micanan Sprocket 50B40 X 1-1/4"

MT22-MON-Y-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
.273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Orange/Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MU22-2WIRE-E-G

Miller Edge MU22 2-Wire End Gray - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
PRO-H-5053U-LH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
12131

Doorlec Brake Disc 4" x 5/8" Keyway

  • Fits Doorlec model SGOH
K76-38732

LiftMaster Electric Motor 24VDC for HCT UL325

503267

PEEK Vehicle Loop Detector 24V with Harness Nema 1 ** Discontinued

  • Enclosed requires separate 24VAC power.
  • Wiring harness with plug for detector included.
  • OPEN only (all LiftMaster operators) or SAFETY/HOLD OPEN only (operators with type B2 T TS or T1 control wiring) when vehicle passes over loop wire
  • Requires a loop of wire embedded in the ground to connect to the detector.
  • Requires 2-wire output connection to door operator and 24VAC power
  • Also known as: G50625S24
  • .......more details
PRO-TB-7511-E

Micanan 3/4HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Non-Monitored board NO photoeyes
MOTOR274

Manaras Electric Motor 3/4HP 575V 3PH

  • €¢This item is compatible with BRAKE011
41A2780

LiftMaster Chain Pulley Bracket Kit

  • Also known as: 1B3214 1A2780 1C2762 41A2780 41B3214
  • Compatible with ATS 2595 3595 models
CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

28-30081

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Roadside (LH)

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
  • 6" radius for smooth door operation
  • Track coupler used for proper alignment at track joints
G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

  • Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
  • 24VAC/VDC
  • 10' Long
PP12X34.5

Base Plate 12" x 34 1/2"

  • 12"x34.5" Base Plate Stainless Steel
ME00035

Micanan Limit Shaft Light Duty 3/8-1/2 x 8-1/2"

G651209P

LiftMaster 10ft PVC Arm Square Yellow/Black Stripes **DISCONTINUED

  • Requires clamp model # G108019 sold separately
  • For use on barrier gate operator BG770
60-7241

Standard Caution Sign French 12" x 24"

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
MB-03204

Micanan Electric Motor Only 1 HP 575V 3PH C-Flange TEFC 56C

  • Fits GT GH GHC & GSD
38072020

Tie Down Chain Assembly GR 70 5/16" x 20' Hook / Hook

  • Boron manganese steel heat treated chain
  • Hook on both ends
  • WLL LBS : 4700
39914650

Hitch Pin Forged Wire Handle 7/8" x 6-1/2" Red

  • Usable length is measured between the shoulder and the cotter pin
38079001

Agri Safety Chain GR 70 3/8" x 69"

  • Min. strength: 20200 lbs
  • Includes hook joiner link & tag
92-00005

Truck Door Hex Nut 5/16"-18

  • Cross ref: W #10.1033.2 for both #2376 & #7176 balancers
LEVER051

Manaras Brake Lever MGH C-1 Galvanized

JDMG-LG-A030

GDI Jackshaft 24VDC Nema 4

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
  • Includes cycle counter timer-to-close 10ft motor wire harness
  • Battery backup optional (sold separately)
6X18PO50

Devanco Loop 6' x 18' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
.331-514-R

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
  • For spring filler use part no. SPRING-FILLER
.343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
3011-1-25

Aluminum Flat Slat Adapter 25 ft

ALUM-547

Aluminum 24" x 100' Spool Sable / Sablon # 547

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 547
  • Reverse side is #431 Bright White
COAX-5-RG6

Coax Cable Assembly 5 ft

  • Assembly includes union
790919

FAAC Control Board 115V for 455D

MIRM-T2-50

Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
  • .......more details
26-943255

Truck Door Bottom Panel with Seal (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

  • Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
  • All hardware is heavy-duty 12 ga material
  • Kits are configured for up to 2" door thickness. Other door thickness are available by request.
7001-9-CHARCOAL

Commercial Side & Top Weather-Strip 9' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
7001-7-CHARCOAL

Commercial Side & Top Weather-Strip 7' Long - Charcoal 7001-HH (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
MK00661

Micanan Varistor for Circuit Board 110V *** NLA Use MK00707

CB-1.097

Whiting Stainless Steel Cable 97" L with Plain Grommet 5/16" Eye

COOKSON-45-GREY

Rolling Steel Slat 3" Cookson Insulated with Wind Locks

  • Special order
5001-8-BLACK

Residential Side & Top Weather-Strip 8' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
EHJ-383-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 208V-3Ph

  • Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
1104-16'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 7' Long - Light Bronze (F). ***NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K12-8033

LiftMaster Female Rod End RH

  • Lower rod end for BG770 BG790
  • same as part # 12-8033
BT503L5

LiftMaster 1/2 HP 208-230V/460V 3p Commercial Trolley Operator with a Brake Logic 5 ***No Longer Available

  • Low profile trolley operator with brake installed
  • Comes with #48 roller chain
.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

  • Spring wire only. Cones and Filler extra
LM21XPBBVB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup and Voice Board ** No Longer Available

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
  • .......more details
5001-WG-18-MOAK

Residential Side & Top Weather-Strip 18' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Special order
  • Sold by full case quantity (20)
  • .......more details
1104-16FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 8' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
GL-12-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 13.5" long Sold as a Pair *Discontinued*

  • LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
  • Robust housing resists impact and corrosion.
  • Slim discrete design ensures little risk of damage due to accidental impact.
  • Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
  • Boards coated in water-resistant polymer for optimal protection from water and humidity.
  • 12 LEDs per guide light
  • .......more details
28-03090

Truck Door 1" Vert. Track and Right Angle Assbly Curbside (RH) 96.5" Todco Style**To extent of inventory

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes right angle frame 1" track and operator bracket
  • Fits doors 72" - 90" high
BK028/PR

Commercial Light Duty Bottom Bracket 2" Track 13-g BB-90 Sold as a Pair

  • For 2" track with 7/16" diameter stem rollers
  • Milford pin cable attachment
  • For 1-3/4" doors
  • Size: 8" tall x 3" wide
  • Includes 1 left and 1 right hand bracket
  • BB-90 MPL
  • .......more details
PRO-HBH-10023U-R

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
PMR10RIT

Carlo Gavazzi Retro-Reflective Sensor with Imperial Connector

  • PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
  • Immune to ambient light Selectable output function.
  • The plastic housing is IP 67 rated and allows cable or screw terminal connections.
  • Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
  • 24-240 VAC or 12~240 VDC
  • Relay Output
  • .......more details
VFD-MOD

Micanan Variable Speed Modification Up-Charge for VFD Operators

  • Variable Frequency Drive modification for commercial operators
  • Whenever the primary power is 575V must add MX00164 panel
PBTL3-RED

Replacement Button Only - N/C Stop Red

  • Stop switch and rubber cover for PBTL-3
12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

  • Fits model LJ / LJH
6944.1

Whiting Top Closure Assembly Stainless Steel Dry Freight

  • This is a Whiting original part
5735.96

Whiting Bottom Seal Grey 96"

  • For Dry Freight and Truss Doors
16094

Whiting Premium Plate Bottom Channel 96"

  • With end hole removed - replacement for serial # 165462
MK-00042

Micanan Overload Reset 1-Phase 13 Amps

6X16SC50

Devanco Loop 6' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
KH-3.5

Magnetic Key Hole 3-1/2" Tall

  • Decorative key hole only
  • Black flexible magnetic material with deep embossed design
5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

  • Pierced track
TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

  • Priced per each
80-2103

LiftMaster Tinnerman Nut **DISCONTINUED

  • Black Plastic Knob
  • Formerly 802103 G802103
  • For SW470 with GL or S3 Board
TL-50ML-BLUE

Threadlocker Blue 50ML *** Price by Quote

  • Medium strength
  • This product cures fully in 24 hours and can be dissembled with hand tools.
  • This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
  • For metal to metal applications only
CHI-SPECIAL

C.H.I. Special Order Door

  • Special order as per customer's requirements
MCT-1

Linear 1-btn MegaCode Visor Transmitter 318 MHz ** To Extent of Inventory

  • Activates one 318MHz MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
  • .......more details
374UT

LiftMaster Universal 2-btn Mini Transmitter

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • This mini remote is NOT compatible with DIP switch remotes or receivers
1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
19-5812-NP

LiftMaster Trolley Chain Pack #48 for 12ft Door Nickel Plated

  • Chain pack only
22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

  • Three button wall station Open/Close/Stop
  • NO contacts on the Open and Close buttons
  • NC contact on the Stop button
  • Stainless steel surface plate
  • Flush mount
Q400E-HCT

LiftMaster Control Board HCT

  • Replaced Q400D-HCT