Devanco Canada - Get The Right Garage Door Opener‎ and Parts

26-94522

Truck Door Intermediate Panel (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

.234_1-3/4"-LH

Torsion Spring .234 x 1-3/4" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 1-3/4"
Length: 12 ft

972LMC*

LiftMaster 2-btn Security+ Transmitter 390 MHz ***Discontinued

Both buttons feature Security+ rolling code technology
Compatible with models manufactured from 2005
Second button can learn other shared Liftmaster radio-controlled devices.
Includes visor clip and Lithium battery CR2032

SOLID_SHAFT_10'

Solid Shaft 1" Keyed 10 ft Galvanized

Actual length is approx. 10'-1"

8331.96

Whiting Brush Top Seal assembly 96"

Fits Coldsaver and Tempguard

.207-134-R

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.218_2-5/8"-LH

Torsion Spring .218 x 2-5/8" x 12ft LH Yellow/Orange

Wire size: .218
Inside diameter: 2-5/8"
Length: 12 ft

SSZP11-6

Solid Shaft 1" Keyed Zinc Plated 11'-6"

.243_2-5/8"-LH

Torsion Spring .243 x 2-5/8" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft

32-48-60

Extension Spring 8' Door - 60 lbs Brown ** check for availability

Double - Loop
32" long 48" stretch 60 lb load
Springs sold individually

1404-16FT-BLK-XL

Residential Side & Top PVC Weather-Strip with cap 16' Long - X-Wide Black

Extra Wide Profile 2-1/2" wide
Flexible co-extruded cap to hide screws
Dual Fin PVC that seals against the door
Material: Rigid PVC / Flexible PVC Co- Extruded
Colors: Black Brown Bronze Cream Sandstone White
Lengths: 7′ 8′ 9′ 10′ 12′ 16′ 18′

.......more details

1326-112-BLK-PLEXI

Elton Commercial Window 1-1/2" thick 1326 Black Frame Sealed Plexi Glass

Screw together window kit
Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
Cut-out size: 25-1/16" x 12-9/16"
Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
Different glass options and frame colours are available upon request

GALV-331-6-144-R

Torsion Spring .331 x 6" x 12ft RH Galvanized Red/White

Wire size: .331
Inside diameter: 6"
Length: 12 ft
Galvanized

K94-36992

LiftMaster Brake Cable Harness 1PH L5

Compatible with various LiftMaster® Logic 5.0 Commercial Gate Operators

CYL-3BXLT

Replacement Cylinder Only for 3BXLT Comes with 2 Keys

GHX-383-3/4HP-RH

Doorlec Explosion Proof Gear Head 3/4 HP 208V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

MX001100

HySecurity Crankshaft w/Crank Bearing Zerk for StrongArm

Compatible with StrongArm systems
Includes crank pin bearing and zerk fitting
Two key stock for secure arm mounting
Supports smooth and efficient gate operation

1-0418

RW Bow Handle Black Steel

Size: 191
Steel drilled for 1/2" dia bolt
Overall size: 13-1/2" h x 2" w. Handle projects 2-3/4" from doorface
Length of Grip: 8"
Depth: 1-7/8"

111-1899

RW End Blind/Cover 31 track Sold Individually

Covers the end of the track to help keep out dirt and debris

PDC300-12-1-40-20

Pulse300 Direct Drive Opener 1/2 HP 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

the PULSE 300 Series is recommended for large high-cycle sectional doors rolling steel doors and light springless applications.
It’s an ideal solution for balanced doors up to 1580 lb./500 ft²
The 40:1 ratio is recommended for most balanced commercial applications.
90V horsepower rated DC motor
If power fails the included 9Ah batteries takeover for continued door function
The built-in battery backup system eliminates the need for a chain-hoist but one can still be ordered as an option if desired.

.......more details

MT21-2M-BLACK-RH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

7176.218*28.85

Whiting Heavy Duty Torsion Assembly .218 x 2" shaft 85"

2376.206.35.940

Whiting Torsion assembly .206 wire size 35" spring length 94" shaft

2376.200.35.930

Whiting Torsion assembly .200 wire size 35" spring length 93" shaft

5423.105

Whiting Side Seal 105" 5/16" Track Spacing

Quote required prior to sale to ensure correct fit

112357.0002

Overhead Logic Board for RSX 1/2HP 1PH

Fits OPRSXH75015BR

BPPN1758

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 96" (8')

GAREX-24X12-BLK

Garex Thermo Window Clear 24" x 12" Black Frame

An original Garex window
Fits 1-3/4" thick door R16

GALV-343-6-144-L

Torsion Spring .343 x 6" x 12ft LH Galvanized Blue/Red

Wire size: .343
Inside diameter: 6"
Length: 12 ft
Galvanized

086565.1013.S

Overhead Door Chain RLR #25 x 62P Loop

GALV-312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

K80-5001

LiftMaster Keyway 3/16 x 3/16 x 1-3/4"

For use with various LiftMaster® Gate Operators and Perimeter Access Solutions

2376.162.19.770

Whiting Torsion assembly .162 wire size 19" spring length 77" shaft

GALV-331-258-144-L

Torsion Spring .331 x 2-5/8" x 12ft LH Galvanized Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

9003-200-17-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

2376.162.18.920

Whiting Torsion assembly .162 wire size 18" spring length 92" shaft

2376.187*29.900

Whiting Torsion assembly .187 wire size 29" spring length 90" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

AW14K500-18-RF

Miller Edge Air Wave Edge System Trans/Recvr 18ft Non-Monitored

AW14-RF MRF-01 RAH-500 (18') P50 P-50H 218-27-18
AW14-RF-K10 end plug connector plug 1/2”-18 ft. hose

Q079

LiftMaster Trolley Body Kit K75-50137

For Liftmaster trolley operator HCT

DHJ751L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Right Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

GDI-TML31

GDI Trolley Bracket Only

Add on feature for JDMG-LG op

GH303L5-RH

LiftMaster Gearhead with Brake 3 HP 208/230/460V 3-Phase Logic 5

Includes CPS-U photoeyes

K74-39295-2

LiftMaster E-Box UL325 SL585

K74-39295-2MC is a Electrical Box Replacement Kit with UL325 Safety Standards and Compliance Regulations
For models SL585503UL SL585103UL

20.5359

BEA Harness IXIO with Relay 30ft

2528.084

Whiting Dual-Spring Shaft 84" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes pre-drilled
Cross Reference: For Whiting # 2376 balancer

K41-0259-000

LiftMaster Chain Guard IHSL/ INSL24UL

K77-10473

LiftMaster Hardware Kit SD GSD

Also known as: 305PBSDGSD
Replacement Single Slide Door Hardware Kit.
Compatible with LiftMaster® Models SD and GSD Commercial Door Operators

2704.156_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Curbside order part # 2705.156*180

HA-112-14G-22

Horizontal Angle 1-1/2 x 1-1/2 x 22" Flag Angle 14-Ga

CA-107-412

Continuous Angle 1-1/2" x 4-1/2" x 107" L Sold per Piece

69987.3072

Todco Original Bottom Seal Reefer Cut to Size ** Special Order Item Price by Quote Only

Fits Serial #30662431-1

69988.3072

Todco Original Bottom Seal Retainer Reefer Cut to Size ** Special Order Item Price by Quote Only

Fits Serial #30662431-1

102-0048

TNR Flexam EM 4/1 0+05 Black Weave Repair Sold per Inch

K75-36875-3

LiftMaster Gear Housing Kit GH 3PH L5

Compatible with Three Phase LiftMaster® GH Model Logic 5.0 Commercial Door Operators.
Complete kit includes: Housing Support Bracket Pads and Pressure Plate Housing with Cover Disconnect Kit Hand Chain Shaft Brake Kit and Installation Hardware.

2376.192.34.930

Whiting Torsion assembly .192 wire size 34" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

EHJ-343-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 460V-3Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

33103

Overload 1.40 to 2.30A

Setting range 1.8-2.5A

2806.200.340

Whiting .200 x 2-3/16 x 34" Roadside with Cones

LEVER092

Manaras Close Limit Actuator

K79-13493-2-600

LiftMaster Logic Board Replacement Kit FDCL Firmware Version 600

Replacement board for fire door model FDCL

41D8257

LiftMaster Cover Only for 8550W

One piece cover is compatible with LiftMaster Model 8550W Elite Series

WD-24X6-112-W

Thermal Window 24" x 6" for 1-1/2" Door White

For 1-1/2" thick door

41D9044

LiftMaster Battery/ Logic Board Cover RJO

Compatible with 8500 and 8500W

MI00018

Micanan Motor Pulley LD 4L 1.5" x 5/8" ID

Used on the motor shaft for a 4L v-belt.

K77-37856

LiftMaster Front Cover Grey RSW12U CSL/CSW24U

Front cover only
HEIGHT: 18-1/4 Inches
WIDTH: 15 Inches
DEPTH: 13 Inches

41D8198

LiftMaster End Panel with all Labels and Light Socket

End panel works with various models

CGH203L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 208/230/460V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

GAL.262-258-144L

delete

K76-37667-2

LiftMaster Limit Box Kit

Compatible with model SL585 Slide Gate Operators.

K72-13912

LiftMaster Clutch Shaft Kit T GH

2807.148.200

Whiting .148 x 2-3/16 x 20" Curbside with Cones

CM30E

Push-to-Exit Button Green

111421.0004

Overhead Limit Module

.343-514-R-C

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

.306-334-R-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.243-258-L-C

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-GH-5043U-R

Micanan 1/2HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-H-7538-U-RH

Micanan 3/4HP 380V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

K72-19974-RB

LiftMaster Output Shaft & Sprocket

Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers

MK-00009

Micanan 9-Pole Control Terminal Strip

MP00226

Micanan Track and #41 Waterproof Chain for 10' h Door

For 3/4 & 1 HP Micanan trolley operators

PRO-J-7511-U-RH

Micanan 3/4HP 115V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-GT-10053-U

Micanan 1HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-APT-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-APT-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

MM00447

Micanan Idler Wheel PRO-APTC

TVB636-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

AC636

Aluminium Threshold AC6 x 36" (3')

126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

Designed to reduce the risk of the door falling in the event of spring breakage
3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
For 1" shaft (1-1/4" shaft available for special order)
Fits 1-3/4"-6" Torsion Springs
One device per spring is required
Not for use with duplex springs

.......more details