Devanco Canada - Get The Right Garage Door Opener‎ and Parts

LB1012-12

Laminated Bumper Standard Black 12" x 12" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MK-00019

Micanan 3-Phase Overload Base

Base only

MIRF-Z2

Miller Edge Patriot 2 Photo Eye Fail Safe 30ft Non-Contact

Meets current UL325 standards for commercial door and gate operators*
Thru Beam technology minimizes false reflective signals
Travels with the door
Easy to Align
No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
Convenient - Assemble and install in the field

.......more details

2950-0003

3/64" Sleeve ONLY 100/pkg

Aluminum sleeves only 100 per pack
Stops are not available in this size

SL-310T-2

Skylink 2-Btn Visor Mount Transmitter 310 MHz ** No Longer Available

Easy to carry or clip on sun visor.
Works in conjunction with Skylink Universal Receiver: Model SL-310R.
Operating range of 100 feet and more.
12V alkaline battery included.

ALUM-5P4

Aluminum 24" x 100' Spool Metallic Gray / Gris Metallique # 5P4

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P4
Reverse side is #431 Bright White

Colour chart

MX-00033

Micanan Trolley Arm Assembly

Kit includes: MM-00031 wall L-bracket (1) MM-00032 trolley arm 105 degrees (1) MM-00033 trolley extension arm (1) MM-00034 trolley arm sliding bracket (1) MO-00004 trolley arm compression spring (1) and MR-00009 red rope c/w handle and warning label (2)

029C98205

W-Style Complete Replacement Door White Stainless Steel Pkg 029C98205

Manufactured to exact size fully assembled tracking and spring assembly included.
98" w x 105" h
Price varies according to size

CRBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

.218-325-DS75

Mini Storage Spring for DS75 4x7 Door

Spring only with loop ends

IRB-MON-RX

EMX Monitored Receiver Board Only

Receiver board only for IRB-MON

BELT-GEAR

Skylink Belt Gear for EQ Operators 210131 ***NLA

New model # 210131 no cover is needed
Metal Gear

WOR

Linear Wiegand Output Receiver 318 MHz

Designed for use as an access control interface for Linear’s block coded digital transmitters.
The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
Ideal way to facilitate handicapped access
Multi-button transmitters can double as personal emergency devices for triggering security alarms
RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding

.......more details

41D0843

LiftMaster Replacement Motor and Sensor 12VDC

For Craftsman garage door opener

85870WL

LiftMaster Elite Series 3/4HP AC Chain Drive Wi-Fi Lock Garage Door Opener **discontinued** replaced by 4690L

MyQ® Technology now with Wi-Fi enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
P3™ Motors provide proven reliability and durability.
¾ HP AC Motor Chain Drive System is built to provide maximum power to lift the heaviest doors including carriage house and solid wood.
I-Beam Rail System and reinforced chassis with chain drive provides maximum support.
Security+ 2.0® safeguards garage access – with every click a new code is sent to the garage door opener ensuring the door does not inadvertently open.
Timer-to-Close automatically closes the door after a pre-programmed number of minutes.

.......more details

Receiver Logic Board Conversion List Comparison Chart

124844

1" Nylon Bushing

BIG-METRO-1PKG

NICE Big-Metro Single Arm Kit

For swing gates with leaves up to 5 m
Underground installation.
BM5024 Motor: Irreversible 24 Vdc with magnetic encoder complete with connecting lever and mechanical stop for the closing manoeuvre.
Compatible with 2 foundation metro boxes externally chamfered with mechanical stop on opening: in stainless steel (BMBOXI) ideal for use in extreme conditions and with the new cataphoresis paint finish (BMBOX) highly resistant to corrosion.
Maximum freedom of choice: release from inside or outside two key or lever operated models freely combinable and easy to operate with just one hand.
Recommended control unit: Moonclever MC824H Features: Simple programming by means of a single key;

.......more details

VBELT_4L400

Lynx VBelt 4L 40"

Fits Lynx MCJH operator

MK00701

Micanan Smart 10.0 Full Feature Circuit Board Monitored with Heavy Duty Relays

For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
The board has P1 & P2 terminals

Instructions Manual

8030196

Marantec Belt Connector Kit

Works for all Marantec Belt Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

BOARD070ER

Manaras Replacement Control Board (No Monitoring)

On-board 390MHz radio receiver accepts 50 remote controls

Replacement Chart Guide de remplacement

T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

20418R

Genie Limit Switch Lead Wire Brown

Brown - Used to connect down limit to sequensor
For Screw drive models

797

Fasteners Clevis Pin 5/16" x 1" 100/Bag

LA500DC

LiftMaster Primary 24VDC Actuator Arm for Single Gate Applications New Model

Replacement actuator arm for single gate applications

Installation Manual Manuel d'installation Sell Sheet Brochure

DR-312

Linear 1-Channel Delta3 Receiver 312 MHz - DISCONTINUED

312 MHz frequency 8 dip switches for coding 256 possible codes
24V AC/DC input power 3 terminal connection
Activates one device
Dimensions: 5.5" W x 4" H x 1.25" D
Same as: DNR00001

Programming Instructions

AIRSWITCH007

Manaras Exterior Adjustable Air Switch SPDT

To be used with metal case part # AIRSWITCH008

41A6104

LiftMaster Cable Tension Monitor

Used on jackshaft model residential garage door openers

RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

Replacement reflector for the CPS-RPEN4 photo-eyes

SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

20-1100C-2P

LiftMaster Electric Motor 1HP 115/230V 1P

Replacement motor for SL595

36179R

Genie Traveler Assembly for Screw Drive

Fits model 3060 L/M
Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R

50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

Nema 4
3-wire air switch; 1-NO and 1-NC contact
Mosley
NO contact on Yellow and Green

.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

Price reflects cost if purchased with an opener

71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
Works on LiftMaster trolley garage door openers

Instruction Manual

T-53-S

FL-Allstar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

This remote can control (open-close-stop) up to 27 doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 535T (190-107475)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8"

Programming Instructions

PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

New version board works on operators with a red cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built June 2008 or later (date code 0806 or newer)
This board does not have a transformer.

RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card (factory installed)
16 transmitters maximun per receiver.
Use part # RADIO-KIT004 when adding or replacing on-site.
This is now standard equipment on all Circuit board operators

831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

Three channels - three relay outputs
Oil-tight JIC ABS case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

Activates two Delta-3 receivers independently
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

26-40402

Truck Door Reefer Side Seal 98" Long for Whiting Coldsaver

Co-extruded using PVC backing with flexible PVC seal against the door.
Cross Reference: W #7470

H11G04

Hinge #4 x 11 gauge

11 gauge # 4 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G03

Hinge #3 x 11 gauge

11 gauge # 3 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

6" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

EP2979

Exhaust Port 3" with latch long barrel

For use on insulated door panels up to 2" thick.
Inside diameter: 3" Includes fasteners & gaskets.
Polished aluminum finish.

02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

Swivel end
Nema 1
Same as Pull Cord

.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

25-60503

Truck Door T-Style Ramp Handles Curbside (Right)

Black plastic construction
Cross ref.: 39504-2

37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)

UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

Grey cast iron painted.
Comes with 2x set-screws
Football style 2 bolt
5-1/8" hole center to hole center distance
3500 lbs load rating

8030234

Marantec Chain Connector Kit

Works for all Marantec Chain Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

BSG115-LED

Devanco Stop and Go Light Black Housing 115V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
Made in Canada

.......more details

Installation Instructions Instructions d'installation Sell Sheet

28412

Doorlec Flange Bearing 5/8" Bore Oilite Bushing

Works on GH/GHX

HTR120NC

LiftMaster Heater Kit for Maxum

Allows for operation in extreme cold environments effective for ambient temperatures down to -31°F (-35°C)
120volt input power. standard 120V outlet required
Can be added easily in the field
Not for damp/wet environments

MA200

LiftMaster K1 Relay option for MA MAT and MAST Barrier Gate Operators

used with Mega Arm Barrier gate operators to control traffic lights etc

487132

Bircher Easy Loop D Vehicle Detection Microwave Motion Sensor ***TEST LOOP ONLY

Complementing loops with versatility for all applications
No need of ground loops - no construction work
Advanced 79 GHz radar technology with static object detection
Reliable activation presence and anti collision
Quick to install easy to configure via appy
Operating voltage: 9-24V DC

.......more details

1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

BEA-35-1555

BEA 50' of Cable Only for LZR Widescan

Optional 50 ft cable for use with the LZR-WIDESCAN

HSLG-111

Linear Commercial Slide Gate Operator 1 HP 115V 1 Ph - Heater not Included

Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
Integrated warning beeper during gate movement
15 diagnostic LEDs on board for ease of setup and troubleshooting
Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
On-board APeX Controller three-button control station

.......more details

RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
Control Board: model 780D

150BL

1-1/2" Light Brush Insert 6ft Long

Polypropylene bristles
Box quantity 50 pcs

41C2762

LiftMaster Chain Assembly Kit 7' (041D3484)

Also known as: 41D3484 41A3484 41C2762
For use with various chain drive garage door openers that utilize a T-rail and have a 7' garage door

NIR-50-325-KIT

EMX Retro Reflective Photoeye Kit UL325 NC/10K Across NO Contact EMX-5255-K

Kit includes photoeye with hood reflector with hood and mounting bracket
Retroreflective configuration
NC and 10K monitoring
50 ft. operating range
Sensitivity adjustment
Wide range operating voltage

.......more details

Installation Manual Specification Sheet

LA412DC

LiftMaster replacement 12VDC Solar Actuator Arm

he LA412 Arm runs on 12V and connot be subbed for LA400 Arm

CP-LX900

Lynx Control Board with Cover for MDJ models

works only on MDJ (medium -Duty Jackshaft) models
UL325 compliant with B2 C2 modes
includes on-board Timer-To-Close
On-Board 372MHz radio receiver accepts 20 remotes

MDJ Installation manual

MV-00025-NEW

Micanan 32-Door O/C/S Transmitter CT-32 313 MHz New Style with Flat Buttons

Commercial / Industrial transmitter

GH-383-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 208V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

5009-559-PAINT

Aluminum Touch Up Paint Nail Polish Style Pebble / Kaki # 559

Glass bottle and brush applicator

1184HD

Whiting Hold Open Device 1184 Heavy-Duty Track Mount

This is a field install accessory.
Also known as: Positive Stop Assembly
This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
The door will stay open above the header to eliminated the door being damaged.

BCSI-PM31

Pivin Drapeau Disconnect Lever BCSI ** Price by Quote Only

For industrial slide gate operator

12-12004

LiftMaster 1" Ball Bearing

For use with various LiftMaster® Heavy Industrial-Duty Commercial Door Operators
Drive shaft bearing used on RBH
Same as K12-12004

SG-13-NO/NC

Telco Light Curtain with Rectifier w/ Normally Open/Normally Closed Contact 72"

1-10 metre sensing range
16 to 56 parallel scanning beams
Active height of 720 mm to 2520 mm
Length of 868 to 2668 mm
3 different channel placement models
Cable or plug connection

.......more details

.177_2"-RH

Torsion Spring .177 x 2" x 12ft RH Gold

Wire size: .177
Inside diameter: 2"
Length: 12 ft

EHJW-311-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 115V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

SL595103UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325 ***NLA

UL 325 compliant system.
Power: 208/230/460/575 VAC. 3 Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.

.......more details

02-403N4-XALD

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Black Black Red

Open/Close/Stop allows complete control of the door.
Compatible with all commercial door operators.
NEMA 4 4X 12 13
Outdoor surface mount station with polycarbonate enclosure Part # XALD03H7
Dimensions: 2.0" x 5.27" x 2.68" (H x L x W)

ERN

Erone 4-Channel Transmitter 433MHz

Innovantive and extreme crashworthiness
Casing: aluminum and black polycarbonate
Range (line of sight): up to 250 m (820 ft).
Dimensions: 70 mm x 40 mm x 10 mm (2.75 in. x 1.57 in. x 0.4 in.)
Comes with: One lithium battery (2032)
Optional 26-bit Wiegand proximity tag built-in: ERN (old #S7TR2641E4T (HID) old # S7TR2641E4M (Mifare)

.......more details

Wireless System Chart

17350

Doorlec Cable 5ft with Antenna

30001

Doorlec Brake Solenoid 575V with wire leads

SM101

Miller Edge Signature Module for T3 Monitored Plugs w/ JB-03

Commercial signature module for use in commercial door and gate operators built after August 29 2010.
Engineered to emulate monitored pulse signal required by some commercial door operators.
LED light indicates device power or fault conditions.
Nema 4
Temperature range: -31F to 158F
5 to 40V DC

.......more details

PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

K001D8397-1

LiftMaster Power Board 3ph 575V L5

This is a 3PH/L5 Power Board 575V Replacement Kit. Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; equipped with current sense

LIMIT023

Manaras Single Limit Switch with 46 degree Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

MOD060-14FT

Manaras Auxiliary Trolley #41 Chain Modification Only

Provides drawbar operation of a standard lift door with the use of a jackshaft operator
Includes tracks for doors up to 12' high. Additional fee for over 12'
Maximum door width 22'

19-41119M

LiftMaster Roller Chain #41 with Master Links 59-1/2" Long

Same as: 195105 19-41119MB 19-4119M 1941119M

50-ALMARM-DOT

LiftMaster 15 ft Aluminum Barrier Arm Square White Aluminum with Red/White Retro-Reflective DOT Tape

Used on BG770
Arm adaptor included
15' x 2.5" square arm
Replaces 50ALUMARM

60-5441

Standard LED Dock Light 40" Yellow DL40-PLED

Use 80% less energy than incandescent or halogen bulbs
LED bulb included

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LITH-9V

Battery 9 Volt Lithium

27191A

Genie Opener Sprocket 10 Tooth

10 Tooth Sprocket.
For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.

SEF2410

Erone Ultra Flat Infrared Photocell 10M (33ft)

Fixed orientation 1 sender and 1 receiver
Range 10M (33ft) in all conditions
Adjustable Sensitivity
1 "NO" and "NC" contact
Power supply 12/24 Vac/dc
Will work with all commercial operators

.......more details

Wireless System Chart

K32-10540

LiftMaster Gear Reducer 20:1 SL595

Same as 32-10540 32-55011 32-5501-1 G3255011

CHAIN031

Manaras Jackshaft Drive Chain #50 5' with Link

CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** NLA

Replaces the 4 wire AO Smith electric motor

110550

Allstar MVP 3 Channel 24V 3 Terminal 4 Wire Receiver 318 MHz *** NLA

3 channels 4-wire 3-terminal operator connection
Wire antenna included
Compatible with Allstar Classic Allistar and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683
RF frequency: 318 MHz

.......more details

Programming instructions