Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
ARK

LiftMaster Auto Reconnect Trolley Kit

Installation Manual
22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

  • Steel construction Zinc plated
  • Cross ref: Eberhard 4300
ED-1300

Devanco Citrus Degreaser & Cleaner 425g

  • This special blend of solvents is designed to quickly and effectively loosen and dissolve grease oil and dirt from metal parts
  • Leaves no residue
  • Pleasant citrus scent
Material Safety Data SheetFiche Signalétique
MJ7104

Doorlec Utility Switch 21800

  • Utility switch with a 'NO' and a 'NC' contact
  • Adjustable arm with roller
27096A

Genie Drive Gear *** To Extent of Inventory

  • Gear for Genie Chain Glide PMX Series and PCG Series
  • 3-1/2 inch diameter nylon gear with square center hole
  • Square center hole is 7/16"
BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

  • Pusher spring 27" long with a large 3" tip. Sold as a pair
  • 11lbs of initial pushing strength per spring+ 3lbs per inch per spring
MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

  • Pro-H requires 3 of these bearings
CABLE_1/8SS-500

Cable 1/8" 7x19 500' Stainless Steel

GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
BEARING005

Manaras Flange Bearing ID 5/8"

  • Flange bearing for 5/8" shaft
.218-134-L

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
2807.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Curbside

  • Replacement torsion spring with cones for Whiting Door Serial # 138631
  • Specs: .139 x 2-3/16" x 14" Long
  • Curbside
  • For Roadside order part #2806.139*140
10FT-RAIL-CHAIN

LiftMaster 10' chain drive rail 1710LMC - colour code: Red

  • #48 chain size
  • Price reflects cost if purchased with an opener
7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

  • I-Beam Chain Drive Rail for model 3595
41A5021-9G-315

LiftMaster Circuit Board Assembly

  • Board: Security+ 315 MHz
  • Aeesmbly includes: circuit board and end panel
  • Also includes 1 Multi-Function wall ctrl panel - 2 wire
  • For ATS2113X model
  • For older ATS operators use replacement board 41A5021-1ATS
TC2

Tri-Code Transmitter 2-btn Visor - DISCONTINUED

  • Tri-Code series 2 channel transmitter model TC-2
  • 300 & 310 MHz simultaneously
  • Each channel can be set on a seperate code format
  • Works with both 8 and 10 dip switch systems
  • Replacement: 380UT
CR2032

Maxcell/Renata 3V Lithium Button Cell

ME113-E

Miller Edge Black End Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
Programming InstructionsInstructions de programmation
71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

  • omplete disk brake assemble including 2-wire solenoid
Installation Manual
41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

  • Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003
Installation ManualManuel d'Installation
41DB002-2

LiftMaster Circuit Board Assembly *** To Extent of Inventory

  • Assembly includes: Circuit board end panel and light socket
  • For belt drive units with two lights such as 3850C
  • Same as 41A5685
19-3025

Roller Chain #50 Nickel Plated 25ft Length

T-639

FL-Allstar 3-btn 9-Door O/C/S Transmitter 107476-311 MHz

  • This remote can control (open-close-stop) up to nine doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 639T (190-107476)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8".
Programming Instructions
T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

  • This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833TC (190-109023)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

  • Sprocket for #41 chain
PRO-HHD-7511U-R

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation manualSpecification sheet
MJ00013

Micanan Brake Shoe and Drum Assembly

  • Fits Micanan models: TB APTB JB HB HHD LH LJ & SD
  • Assembly includes: Both right & left brake shoe and the drum
T3B-OCS

Lynx 3-btn O/C/S Transmitter 303 MHz

  • Ultra secure mid-size transmitter does not have dip switches.
  • 3 button (Open/Close/Stop)
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Must be used with Lynx OCS receiver for o/c/s functions
  • Visor clip and 12V battery included
Compatibility chart
OSH-6532-ECB

Manaras Opera-SH 1/2HP 600V 3Ph with Electronic Circuit Board ** To extent of Inventory

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

  • Double Angle Rails for doors up to 14' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 16' 11"
TRANSF143

Manaras Transformer 120/240-24V 40VA

  • Transformer 120-240V Primary 24V Secondary 40VA
VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

  • Used on MTH/MTBH APE APT models
  • Same as Doorlec 19030
298601

Linear Wireless Multi-Code Keypad 310 MHz

  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • 4-digit access code
  • Backlit keys
  • Easy access to battery
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Installation Manual
109410

Linear 2-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 per channel (set by dip switches)
    • .......more details
Programming Instructions
308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

  • 1-Channel Gate Receiver
  • High-sensitivity short-range radio receiver
  • Operates in conjunction with the 9-inch local antenna (supplied).
  • Designed for use with automatic gate operators or systems where a remote antenna is needed.
  • Same as: DNR00013P
Installation Manual
8833T-OCS

Allstar 3-btn 1-Door O/C/S Transmitter 109372 318 MHz *** To Extent of Inventory

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

  • Activates three 318 MHz MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
1209.1

Whiting Stainless Steel Truck Door Side Hinge with Roller Cover

4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
1006-2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
  • DIE # ES18009
RCB-2560

Roller Chain Break #25 thru #60

  • Replacement tip included.
18-RWB-PAIR

Winding Bars Round 18" Set of 2

  • Cold rolled hardened steel.
  • Machined to 7/16" at one end with 1/2" outside dia. on the other.
  • Sold as a pair.
9002-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long *** To Extent of Inventory

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle clip-on vinyl retainer.
  • Side use: clips onto steel jamb.
  • Also for residential use.
7001-8-WHITE

Commercial Side & Top Weather-Strip 8' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
32-48-180

Extension Spring 8' Door - 180 lbs Gold ** Replaced by 27-48-180

  • Double - Loop
  • 32" long 48" stretch 180 lb load
  • Springs sold individually
Spec Sheet
32-48-130

Extension Spring 8' Door - 130 lbs Yellow ** Replaced by 27-48-130

  • Double - Loop
  • 32" long 48" stretch 130 lb load
  • Springs sold individually
Spec Sheet
25-42-110

Extension Spring 7' Door - 110 lbs White

  • Double - Loop
  • 25" long 42" stretch 110 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
95-00114

Truck Door Rivet 1" Stainless Steel

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0032
27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White
27-20308

Truck Door Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2523 for #2376 balancer
27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2548
27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2547
Z9401

Coupler 1" Bore Non-Ajustable

  • Non-Adjustable Shaft Coupler Steel Zinc plated
  • 1" Bore
  • L= 4.7" 3 screws and nuts
  • Tightening torque on shaft: 20lb-ft max
Z9403

Coupler 1" Bore Adjustable Silver

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.35"
  • Painted silver
DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

  • 32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
  • Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Maximum Door Height: 32'-1".
  • Rated Lift per Drum: 1000 lbs.
  • Max Cable Diameter: 1/4".
    • .......more details
H11G05

Hinge #5 x 11 gauge

  • 11 gauge # 5 hinge - 0.76 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G02

Hinge #2 x 11 gauge

  • 11 gauge # 2 hinge - 0.69 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
EP2979

Exhaust Port 3" with latch long barrel

  • For use on insulated door panels up to 2" thick.
  • Inside diameter: 3" Includes fasteners & gaskets.
  • Polished aluminum finish.
RS1037

Roller 3" Steel 7" stem 10 ball

  • Steel Roller Wheel diameter: 3"
  • Working length: 6.5"
  • Overall length: 7.75"
  • Box qty: 75 Box weight: 34.2 lbs (3-7-10 Steel)
R5209

Cast Iron Pulley 4"

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Cast iron pulley mounted on two pressed sealed bearings
  • 300lb load rating
25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
  • Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
  • Box quantity: 25
6X20PO50

Devanco Loop 6' x 20' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
4X10PO50

Devanco Loop 4' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
24-24-6

Small Relay 24VAC 11-Pin 3 PDT

BK313

Jamb bracket J-13 #13 12 gauge

  • Sold by the piece
  • Height 5.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

  • Replacement arm only - no stripes old style
1104-7FT-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
SF200

Spring Fitting 2" Pair

  • Unviversal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding and (1) stationary.
  • Maximum wire size diameter: .3065".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft
  • Winding bar hole 1/2"
    • .......more details
20386R

Genie Sequencer Board AC Screw Drive

  • For Genie Screw Drive garage door opener models: PRO95 CM8600 CM7600 Series II ISL950A IS550
  • Replaces part number 31184R
MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

CPS-EI

LiftMaster 4-Wire Sensing Edge Interface

  • Designed to provide advanced safety and security to the door system in commercial environments.
  • This device is intended for use with LiftMaster Logic Commercial door operators and compatible with 4-wire monitored sensing edges.
  • This is a stand-alone reversing system and is not intend to be used in conjunction with any additional entrapment protection devices.
  • A junction box not provided is recommend to protect exposed wiring.
  • Compatible with Logic 5.0 Logic 4.0 Medium Duty Operators and Fire Door Operators.
H751L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by the RBH751-RH

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

  • 3/8" bolt has 9/16" head
  • Max torque = 22
  • Full thread
  • Grade 5
15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

27-20401

Truck Door Bracket for Torsion Assembly Curbside (RH) for Todco Roll-Up Doors

  • Steel construction
  • Zinc plated finish
  • Cross Reference: T #51036-1 W #4029 360100
T-833

FL-Allstar 3-btn 3-Door Transmitter 108817-311 MHz

  • This three channel transmitter controls up to three doors (open-close) or one door (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833T (190-108817)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
MODKIT065D

Manaras Trolley Hoist #41 Brake Release Kit No Shaft Field Install

  • Modification kit for in-field upgrades
  • Hand chain sold separately
PRO-GHC-10011U-L

Micanan 1 HP 120V 1P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
EL1-SS

LiftMaster Telephone Entry System Stainless ** NLA

  • A Telephone Intercom and Access Control System which provides wired telephone intercom communication and secure access control at the gate or door.
  • Connects directly to the existing residential home phone line so no additional monthly expenses are incurred.
  • Stainless steel faceplate with black powder coated housing is attractive and tough.
  • 200 (4-digit) unique programmable entry codes provide convenient assigned access.
  • Optional power supply transformer not included: K002B0821-1
Programming InstructionsInstructions de programmationSell Sheet
5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

  • Most common side seal for Whiting Dry Freight doors.
  • 115 inches will fit almost every size door.
104255

Allstar Clip only for 8833TC

  • Clip only
MK-00031

Micanan Transformer 230V-24V-40VA

MK-00005

Micanan Cut-Out Limit Switch

ER100

Carlo Gavazzi Reflector 4" (100mm) Square

  • High quality reflector for retro-reflective photoelectric switches
  • Dimensions: 100 mm x 100 mm 9.2 mm thick
7096

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Curbside (RH)

  • A Whiting original
  • Cable drum and bearing
7-6100

RW Hanger 160B2 Sold per Unit

  • Hanger used on #333 track
  • For door thichness: 2-1/4" to 3-1/2"
MM00078

Micanan Solenoid Lever Limited Duty MSI0094

MGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
41A8910

LiftMaster Chain Idler Pulley

OSH-6813-M-N1-RH

Manaras Opera-SH 3/4 HP 208V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
BGARM

LiftMaster 10' Arm only for Techna Barrier Gate

  • For use on Techna gate operator
LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details