Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

  • Wireless RF Digicode® keypad.
  • Frequency: 433.92 MHz.
  • For automatic door opening in sequential mode.
  • 6 channels to control 6 different relays or 6 different RF receivers.
Programming InstructionsWireless System Chart
M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

  • Same as part # 65893 and 97244
  • Visor mount
  • Includes battery CR2032
  • Made in Germany
Instructions
41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

  • Fits 3265 PD612C
  • Replaces 41AC150-2 (board only - need to install on exisiting panel)
  • Also known as 41AC050 41AC050-2M
28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

  • Galvanized steel 14 gauge construction
  • Holes drilled to allow for faster plug weld installation to frame
  • For use with 1" rollers
11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

  • Used on slide gate operators using #50 chain.
  • Also referred to as adjuster bolts
EL25KEY

LiftMaster Replacement Key for EL25 (041B0012)

  • One (1) key for the EL25
  • Same as 041B0012
OES-SD16

LiftMaster Optical Edge System 16ft

  • Sectional door edge kit 16ft (4.9M)
Installation ManualManuel d'InstallationSell Sheet
41D7742-7

LiftMaster Travel Module

  • Fits models 8165 8355 & 8155W
305-153613

LiftMaster Idler Sprocket Assembly (K305-153613)

  • Fits SL595
SOLID_SHAFT_8FT

Solid Shaft 1" Keyed 8 ft Galvanized

  • actual length is approx. 8'-1"
736

Fasteners Round Head Carriage Bolt 5/16-18 x 3/4" Gr 2 1000/Box

  • Full length thread
  • Max torque = 12
Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
CPS-3

LiftMaster Option Card with CPS-L Eyes

  • For applications requiring two sets of photoeyes ( CPS-III)
Installation Manual
MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 1000000+ (MegaCode format)
  • RF frequency: 318 MHz
    • .......more details
Installation Manual
MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No cables or coiled wires
    • .......more details
Programming Instructions
V300-TS

Top Seal Weather Strip 100 ft per Roll

  • For use with bottom retainers installed on top of door.
  • Vinyl: Black
K75-18364

LiftMaster Arm Assembly Kit for SW470

  • Complete arm kit for SW470 gate operator
AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
  • Ambient temperature range: -49F to 180F
    • .......more details
Instructions ManualSell Sheet
41A7619-4

LiftMaster Cover for 8557

41A7756

LiftMaster End Panel with Light Socket for 8557

MU00001

Micanan Swivel Pulley

  • For models PRO-H / HB
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
.234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
25-60050

Truck Door Latch Plate for Todco Roll-Up Doors

  • Steel construction Zinc plated finish
  • Contoured for proper lock engagement
  • Cross Reference: T #70093 W #4021 270700
25E10220

Truck Door Top Closure Plate & Slide Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Included: Base plate slide bolt & flanged nut
  • Improved heavy-duty reinforced slide
  • Adjusts top panel for firm seal
  • Cross Reference: W #6944
26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
26-14521

Truck Door Intermediate Panel (11" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-14522

Truck Door Intermediate Panel (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

  • Allows for easy door operation.
  • Seal protects cargo area from dirt and moisture
  • Will not bunch up as bottom panel goes around top curve.
  • Co-extruded using rigid PVC backing with flexible PVC seal against the door.
  • For use with right angle vertical track
  • Fits only right angle vertical track assembly.
    • .......more details
PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

  • Reflector (ER4) not included
Installation Manual
.234-134-L

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
19-10929

LiftMaster Hoist Chain Sold by the Foot

  • and Chain for LiftMaster commercial hoist operators
HD-15

Reflector Hood for 3" Round Reflector

  • Black/Charcoal
7001-16-W/B

Commercial Side & Top Weather-Strip 16' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
.375_6"-LH

Torsion Spring .375 x 6" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 6"
  • Length: 12 ft
.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.306_2-5/8"-LH

Torsion Spring .306 x 2-5/8" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.218_2-5/8"-LH

Torsion Spring .218 x 2-5/8" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.262_2"-LH

Torsion Spring .262 x 2" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
.192_1-3/4"-LH

Torsion Spring .192 x 1-3/4" x 12ft LH Silver

  • Wire size: .192
  • Inside diameter: 1-3/4"
  • Length: 12 ft
LSGRY

Loop Sealant Cartridge Grey 29oz

  • Also available in black (LSBLK)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
LSBLK

Loop Sealant Cartridge Black 29oz

  • Also available in grey (LSGRY)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
380LMC

LiftMaster Remote Work Light

  • For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
  • Provides 200 watts of light with adjustable light time delay
  • Lights are controlled by opener activation or control panel light button
  • Add as many lights as you wish – perfect for brightening up a dark garage or workspace
Installation ManualManuel d'InstallationTroubleshooting
41B5669

LiftMaster Belt Clip and Link Kit

  • Used for splicing "New-Syle" belt
41A4252-6G

LiftMaster Circuit Board Assembly ** Discontinued

  • Assembly includes: circuit board end panel and light socket
  • Also includes: 1 Multi-Function wall control panel - 2 wire
  • For chain drive units with two lights
  • Fits 1250 1260 1270 1280 220WD 320WD 5100 7200 & 8100
41A5483-1C

LiftMaster Circuit Board Assembly *** Discontinued

  • Assembly includes: Circuit board and end panel
  • For chain drive units with one light
  • Fits models 2245 & 2255
  • Last letter of the part # indicates revision date the most recent product will be sent out
  • Also known as 41A5483-1 41A5483-1B
T-733

FL-Allstar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

  • This transmitter can control (open-close-stop) up to three doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 733T (190-107477)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8".
Programming Instructions
.437_6"-RH

Torsion Spring .437 x 6" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 6"
  • Length: 12 ft
.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.468_3-3/4"-RH

Torsion Spring .468 x 3-3/4" x 12ft RH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
.262_2"-RH

Torsion Spring .262 x 2" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
.250_1-3/4"-RH

Torsion Spring .250 x 1-3/4" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 1-3/4"
  • Length: 12 ft
MJ00005

Micanan Clutch Pad 3/4" ID

  • Used on all Micanan commercial operators & PRO-GO gate operator
  • 3/4" inside diameter 4" outside diameter
MJ00013

Micanan Brake Shoe and Drum Assembly

  • Fits Micanan models: TB APTB JB HB HHD LH LJ & SD
  • Assembly includes: Both right & left brake shoe and the drum
CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

  • Brake shoes for all Lynx operators
  • Assembly includes the shoes
  • release spring and bolt included
CP-CRG-NEW

Lynx Auto Re-Connect Carriage 14-1/2" Arm Sold Separately

  • Will work on most brands of commercial trolley operators using 2" angle tracks.
H14G04

Hinge #4 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #4 position
  • Use between sections 4 and 5
  • Same as part number 244
    • .......more details
SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 2 NO relay + 2 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output Relay number 4 can be setup to latched output
  • Can be used for O/S/C
  • Power requirements: 12/24Vac/dc
    • .......more details
Sell SheetBrochureWireless System Chart
MOUNTSHAFT014

Manaras Clutch Shaft Kit for Opera-H (OPH)

  • Input / clutch shaft kit for Manaras Opera-H
Drawing
TRANSF142

Manaras Transformer 575-24V 40VA

  • Transformer 575V Primary 24V Secondary 40VA
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 4 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
Programming Instructions - ECBProgramming Instructions - CONT
1336.1

Whiting Curbside Top Panel Closure Bracket for 10" radius

HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

1001-14-GREY

Commercial Side & Top Weather-Strip 14' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
RV-112

1-1/2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
138BL

1-3/8" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1702
4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4005-16FT

Aluminum Retainer only for Heavy Brush 16' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
4009-6FT

Aluminum Retainer only for Light Brush 6' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree *** to extent of inventory

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1003-5"-150FT

Bottom U-Rubber 5" Black 150' Long

  • 150ft spool of vinyl insert.
1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

  • Black - for door thickness of 1-3/8"
1007-1-5/8-24'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 24'4"

  • For door thickness of 1-5/8" to 1-3/4"
  • die # A-25388
1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

  • For door thickness of 1-5/8" to 1-3/4"
1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/8-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1006-1-1/2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1005-1-3/4-24'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
1005-1-1/2-24'

Aluminum Bottom Retainer U-Shaped 24' Long

  • For door thickness 1-1/2"
1003-2-14'

Aluminum Bottom Retainer L-Shaped 14' Long

  • For 2" thick doors.
1003-1-3/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
1003-1-3/8-8'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
7001-7-BROWN

Commercial Side & Top Weather-Strip 7' Long - Commercial Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1104-10FT-DK-BR

Residential Side & Top PVC Weather-Strip with cap 10' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
RCB-2560

Roller Chain Break #25 thru #60

  • Replacement tip included.
18-RWB-PAIR

Winding Bars Round 18" Set of 2

  • Cold rolled hardened steel.
  • Machined to 7/16" at one end with 1/2" outside dia. on the other.
  • Sold as a pair.