Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MI00007

Micanan Front Idler Assembly for PRO-APT/T

For model PRO-APT / T
3/4" x 5.79" LG

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

F539.90000

Bircher Infrared Programming Remote RC Duo 2 Red

Conveniently program all parameters from ground level
Backlighting of specific buttons provide instant confirmation of programmed parameter & value
Configure any Hercules 2 Hercules 2s Reflex 2 or UniScan sensor with the same remote
Multiple address feature allows programming of a single sensor even in close proximity to other sensors
Large highly visible buttons
Automatic off feature conserves battery life

.......more details

Programming Instructions F539.90000 Sell Sheet

50-104-1

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

197LM

LiftMaster Wire Channel for T-Rail 5ft Replaces 27LM

Plastic channel attaches to the T-rail
Hides up to 3 pairs of wire
Each piece is 5ft long
Box quantity of 100

27-20004

Truck Door Dual-Spring Shaft 93" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

MK-00060

Micanan Timer Plug-In Type 0-10min 24V 8-Pin (MK00481)

Programming Instructions Adding a timer

3AG1

Miniature Fast Acting Glass Fuse 1 Amp 250V (5/pkg) - 766120

50-450

LiftMaster Interlock Switch for Sectional Door Nema 4 (Same as 50-13529)

Interlock switch is engaged by the door side lock and disables operator control.

TUBE_SHAFT_8FT

Hollow Shaft 1" x 8'-10" Galvanized 16 gauge

QUICK_CLOSE

Commercial Quick Close Device / Universal Timer V8

This device will automatically close the door as soon as the vehicle passes through the safety beams.

Wiring Instructions Monitored connection Non-monitored connection

MX00147-NEW

Micanan Complete Clutch Kit for PRO-TB New Style Frame (MX00211)

After January 2006
8" Diameter pulley
Feb 2017 - new part number MX00211

.234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.207-258-R

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

10FT-I-BEAM

LiftMaster 10' chain drive rail 3710CH / CD1010

I-Beam chain rail for 3595 & ATS
Space required: 2" above heighest point of travel of the door

12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

41A7562

LiftMaster Light Lens for 8360 8550 8355

Replacement light lens

C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF175

PS31L-NS11R1M00

Carlo Gavazzi Utility Switch

Switch DPST-NO/NC Chassis Mount
Actuator Type: Side Rotary Adjustable Roller
Termination Style: Screw Terminal
Ingress Protection: IP66 - Dust Tight Water Resistant
Switch Function: On-Mom Off-Mom
Current Rating (Amps): 5.5A (AC) 2.8A (DC)

.......more details

Installation Manual

.283-134-R

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.283-134-L

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-134-R

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.243-134-R

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.218-134-R

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

86LMC

LiftMaster Antenna Extension Kit

For use with 312HMC 412HMC 422LMC and 423LMC
Kit contains 15ft of cable

37220R

Genie Replacement Safety Beam Set

Works on all Genie model openers including Legacy with 2-pin connector safety beams
Not compatible with openers made before 1995
Brackets and wiring included
Will work with all Genie and Overhead Residential openers that were manufactured with photo-eyes

GK-BX

Genie Dual Frequency Wireless Keypad 37224R

Temporary PIN codes to allow for one time special access needs
Able to operate up to three Genie Intellicode garage door openers
Auto-seek dual frequency technology automatically transmits in both 315 and 390 MHz
Compatible with Intellicode 1 and Code Dodger series

Programming Instructions

387LMC

LiftMaster Universal Wireless Keyless Entry

Universal Keyless Entry works with garage doors made by LiftMaster Genie Stanley Overhead Door Wayne-Dalton Craftsman Chamberlain and Linear/Moor-o-Matic.
Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
Wireless – powered by one 9V battery (included)
Weatherproof slide-up protective cover
Open or close the garage door without using a remote
Backlit keypad

.......more details

Programming Instructions Instructions de programmation Sell Sheet

19-10929

LiftMaster Hoist Chain Sold by the Foot

and Chain for LiftMaster commercial hoist operators

.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

HD-15

Reflector Hood for 3" Round Reflector

Black/Charcoal

PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

Suitable for exterior applications NEMA 4
Multi-supply voltage 12-240VDC 24-240VAC
LED indication for power supply and target detected
Not recommended for carwash applications
Operating temperature -25 to +55 C
Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3

.......more details

Installation Manual

ER100

Carlo Gavazzi Reflector 4" (100mm) Square

High quality reflector for retro-reflective photoelectric switches
Dimensions: 100 mm x 100 mm 9.2 mm thick

IS-2

Interlock Switch for Sectional Doors

Mounts on the door track to prevent the use of the operator when door is locked
Can be wired to a three button station
Demensions: 3" h x 3" w x 1-1/2" d

MV00077

Interlock Switch for Sectional Doors

Mounts on the door track to prevent the use of the operator when the door is locked

CPS-U

LiftMaster Commercial Protector System Eyes

For LiftMaster Logic 2 3 4 & 5 commercial operators only
NOT for outdoor applications
Allows activation of the timer-to-close
Mounting hardware included
Sensing distance of 30 feet
CDO 2010 Ready

.......more details

Installation Manual Manuel d'Installation Sell Sheet

45ACT

LiftMaster Circuit Board

Board: Tri-band Security+ 2.0
AC Belt and Chain Drive models
Fits models LC500EVC HD420EVC PD622EVC
Same as 41D7675 1D7675 7675 45ACBL1 45ACBL2 45ACBL3 45ACBL4 45ACBL5 45ACCL1 45ACCL2 45ACCL3 45ACCL4 45ACCL5 45ACBR1 45ACBR2 45ACBR3 45ACBR4 45ACBR5 45ACCR1 45ACCR2 45ACCR3 45ACCR4 45ACCR5 045ACT 041D7675

41DJ002

LiftMaster Circuit Board with Plate for 8500

Board: Security+ 2.0 for DC Jackshaft Model 8500
5 year warranty

02-103

Push Button Station 3-btn Surface Mount Metal Housing

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

50-106

Take-Up Reel 2-Wire Metal 18-ga 20ft

18-gauge
20 ft extended
Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
Also called Reel cord

475LMC

LiftMaster DC Battery Backup *** To Extent of Inventory

For use in Liftmaster 3500 3800 and 8500 models
1 year warranty

Installation Manual Manuel d'Installation

7001-16-W/B

Commercial Side & Top Weather-Strip 16' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

DTKP

Linear Delta-3 Wireless Keyless Entry 310 MHz

Activates multiple Delta-3 receivers
1-8 digit PIN
Backlit keys for easy viewing
Mounting hardware supplied
Power: 9-volt battery
Codes: 256

.......more details

Programming instructions

10FT-RAIL-BELT

LiftMaster 10' belt drive rail 2770BD - colour code: Blue

Price reflects cost if purchased with an opener

CR2450

Maxcell/Renata 3V Lithium Button Cell

355LMC

LiftMaster Universal Radio Control Receiver 315 MHz **NLA

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up to 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the purple learn button (ERT format)
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

Programming Instructions Instructions de programmation

CR2016

Maxcell/Renata 3V Lithium Button Cell

NIR

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5200-2)

Watertight packaging
Detection range: 30 feet
6 foot cord
Reflector Bracket and mounting hardware Included
2 LED indicators
Sensitivity adjustment

.......more details

Installation Manual Sell Sheet

ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details