Devanco Canada - Get The Right Garage Door Opener‎ and Parts

16-5L300

LiftMaster Cogged Vbelt 5L 30"

PPWR

LiftMaster Passport Receiver with Sec+ 2.0 Technology

LCD Menu Screen streamlines programming for easy set-up of facility codes and bit format.
Compatible with all Standard Wiegand Protocols providing control for the security and access of your property.
IP44 Rated Housing designed for outdoor environments.
Designed for outdoor environments
Can be programmed with 1- and 3-Button remote controls offering a variety of solutions to fit your specific application needs

Installation Manual Manuel d'Installation Sell Sheet

Z9220

Pocket Style Res / Com Combo Spring Gauge

Includes wire sizes .1875 thru .5
Double saw-tooth leaves for easy wire measuring
Stainless steel
Includes belt sheath

27220A

Genie Limit Switch Chain Drive

Compatible with the following operators: PMX700 GPS700-IC PMX1200 GPS1200-IC PMLD500 PMX500-IC/B PMX300-IC/B IC250/B PMX60-65-70-75-80-85-300IC-500IC-IC250 among others
For chain drive models with internal limits

1A4324-EZ

LiftMaster Steel Hood EZ Mount Bracket with Adaptor Plate (75-12362/ 001A4324)

Heavy-gauge steel bracket with EZ mount adapter plate mounting bolts nuts and washers.
Adapter plate holds mounting bolts in place for ease of mounting.
Cannot be used with Model GH 3HP.

GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

Includes CPS-U photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming Instructions

MK-00719

Micanan Replacement Antenna for On-Board & External Receiver

Approx. 8" long

776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

1/4" bolt has 7/16" head
Max torque = 6
Full thread
Grade 5

MOD081

Manaras Damp Environment Oil and Dust Tight Modification replaces N1 with Monitored N4 Eyes

For applications where dust water spray oil leaks or any other type of condensation is present.
Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well

K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

For models T APT SD & GH 1/2 HP - 2 HP models L5

CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4 or CPS-RPEN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

CH501L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

S2TR2641E2M

Erone 2-Channel Master Transmitter 433MHz

One master transmitter is required for each multi-user receiver for doing the programming.
Range in open space: 850ft or 250 m
One 12V lithium battery included
Bronze body with yellow buttons.

Sell Sheet Brochure Wireless System Chart

MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

P93501100013

Lux 2B Hydraulic Swing Gate Operator 120V UL/CSA

Leaf Weight: Up to 660 lbs (300 Kg)
Leaf Length: Up to 10ft (3 m)
Opening / Closing time: 17 seconds

CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
Polarized photo-eye design for a safe retro-reflective photo-eye system
Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
Range up to 30 ft - indoor use only
24VAC operation
Color: Yellow

.......more details

Installation Manual

K75-10177

LiftMaster Brake Hub Assembly

Assembly includes: Brake hub set screw push-on fastener and feather key

21-10298

Transformer 100VA

Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
Fused at 5A

ARK

LiftMaster Auto Reconnect Trolley Kit

Installation Manual

25-10301

Truck Door Heavy-Duty Cable Anchor Bracket Black for Whiting Roll-Up Doors

Steel construction
Allows proper rotation of cable head
Cross ref: Whiting 5803

CR-2000

EMX Keypad/Card Reader Waterproof 5401-1

Back-lit keys for nighttime operation
2000 users (card or passcode)
Rugged waterproof design and vandal resistant
9-24 VDC
Tamper alarm
Door call button

.......more details

Instruction Manual Spec Sheet

08-11013

LiftMaster Bevel Gear 3/4" ID

Fits the LiftMaster GH operator

MH00099

Micanan Bearing

Fits PRO-APT and PRO-HHD
Requires 2 per shaft
3/4" Bore

.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

20-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Red

2 strand 22 gauge tin-dipped copper hook-up wire
Color coded White & White/Red wires

71-B575

LiftMaster Interior Mount Brake Assembly 575V

Instruction Manual

24-24-6

Small Relay 24VAC 11-Pin 3 PDT

.312_6"-RH

Torsion Spring .312 x 6" x 12ft RH Yellow

Wire size: .312
Inside diameter: 6"
Length: 12 ft

T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
2-buttons provides control for 2 Lynx operators
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Will work with Lynx residential operators built from 2000 and up.

.......more details

Compatibility chart

VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

Used on MTH/MTBH APE APT models
Same as Doorlec 19030

RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 1 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).
Replaced by RADIO-RE900A

.......more details

Programming Instructions - ECB Programming Instructions - CONT

RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

Open/Close/Stop remote for 4 doors.
By selecting A B C or D on the rotary switch you can operate any of the four doors.
Comes with LED battery life indicator.
9V battery included.
Can be wall or post mounted.
Must be used with 4 MCR series receivers.

.......more details

Programming Instructions

831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

Three channels - three relay outputs
Textured aluminum case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

111645

Allstar MVP 1-Channel 4-Wire Gate Receiver 318 MHz ***Replaced by P-9931R-4F

One channel
4-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

8833T-OCS

Allstar 3-btn 1-Door O/C/S Transmitter 109372 318 MHz *** To Extent of Inventory

Open/Close/Stop remote for 1 door
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

HAE00002

Linear Safety Beam Set *** No Longer Available

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.

1104-7FT-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

25-42-60

Extension Spring 7' Door - 60 lbs Brown

Double - Loop
25" long 42" stretch 60 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

91-00402

Truck Door Rib Neck Carriage Bolt 1/4"-20 x 1.25" (9/16" head)

Zinc plated finish
Use rib neck carriage bolts with lock and keeper assemblies and hinge installations
Rib neck carriage bolt allows tamper proof installation with a rivet lock and eliminates the nut being installed externally for security.

28-32072

Truck Door 2" Horizontal Track with 8" Radius 107" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

Z9401

Coupler 1" Bore Non-Ajustable

Non-Adjustable Shaft Coupler Steel Zinc plated
1" Bore
L= 4.7" 3 screws and nuts
Tightening torque on shaft: 20lb-ft max

H11G05

Hinge #5 x 11 gauge

11 gauge # 5 hinge - 0.76 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

25-10250

Truck Door Bottom Fixture for Todco Roll-Up Doors

Steel construction Zinc plated finish
Cross Reference: T #69249 T #61352 W #4003 230000

SLT4-22

Rolling Steel 3" Crowned Slat 22-ga Galvanized

CONSD24V

Reversing Contactor Struthers Dunn 24V

Struthers-Dunn # A275KXX90

Z9004

Shaft Key Bent 3" x 1/4"

3" Bent Key
Zinc Plated Steel

ALUM-571

Aluminum 24" x 100' Spool Brownstone / Beige Antique # 571

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 571
Reverse side is #431 Bright White

Colour chart

CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

ETB-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener TEFC Motor

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
DC2000 Logic Controller
Comes with standard O/C/S push button station

HBS23LU

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Single End Stile Sold per Pair

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For Low-Headroom Track
For 2" or 3" Doors
Fits 2" or 3" Track
Single End Stile

.......more details

4X8SC50

Devanco Loop 4' x 8' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

Used on slide gate operators using #50 chain.
Also referred to as adjuster bolts

778

Fasteners Hex Head Bolt Gr 5 5/16-18 x 1"1000/Box

5/16" bolt has 1/2" head
Max torque = 12
Full thread
Grade 5

27-48-240

Extension Spring 8' Door - 240 lbs Blue

Single - Loop
27" long 48" stretch 240 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

86-925

Gel Connectors Red 19-26 AWG 100/Pkg

Internal moisture-resistant sealant protects wires from corrosion (indoor/outdoor use)
Quick one-step splicing – insert unstripped conductors and crimp
Use with solid copper single-conductor wire 19-26 AWG
Maximum insulated O.D. of .066 in. (1.68 mm)
Permanent connection- once crimped they cannot be reused
Use 12 or 3 ports as needed

.......more details

CLUTCH005

Manaras Friction Clutch 1-3/8" #50 MGH

For MGH 2/3/5HP

WRAES

Erone Raduim 2-in-1 AES128 Wireless Receiver 433MHz

The WRAES is a 2-in-1 AES128 encryption receiver.
It works either in stand-alone or connected to an access control system (Wiegand output).
Compatible with any high-security AES128 RADIUM wireless remotes it was designed to prevent remote cloning.
The code sent by the transmitter changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and remotes.
Stand-alone mode: 500 transmitters

.......more details

10TD900PB

BEA Wired Transmitter 900mhz Flagged Flag Connectors AAA Battery

Multi-colour LEDs on receiver provide installer with visual notification of signal strength and activation status.
Frequency: 908-918 MHz
Radio Control Type: Digital
Programmable Capacity (standard): 75/unlimited universal
Operating Temperature: -10-55C

10FT-BELT-LINEAR

Linear 10ft Belt Drive Rail for residential openers (HBT10C)

For use with Nice/Linear LDCO863B LDCO841 LDCO801 LCO75 LSO50 LDO50 and LDO33 garage door operators.
Fully-assembled and pre-tensioned 10-foot belt-drive T-rail
This “T-rail” can be converted to stronger “I-rail” with Nice/Linear’s bolt-on Carriage House Conversion Kit CHCR-10.

50181

Doorlec Brake Assembly 230/208V W/Double Pulley

Complete brake assembly

38000063

Tork Winch Electric Motor 1HP 115V 1Ph

Replacement electric motor for TW 1200

2500-1495

Linear Pushbutton Stop/Reset

P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

Allstar compatible
Three channel transmitter
8 dipswitches 318 MHz

Programming Instructions

IP-MDSF

CDVI Point of Entry Exterior Multi-Tenant Flush Mount Video Intercom System

Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
IP54 (recommended to be put under a canopy or covering)
Operating temperature: -10C to 50C
Stainless steel panel

.......more details

CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake optional **
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

041D8993

LiftMaster Cover Silver 8365W 83650-267

Replacement LiftMaster® Cover.
Compatible with various LiftMaster® 8365W Series WiFi® AC Chain Drive Garage Door Openers; powered by myQ

CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
Pre-Wiring included for postal lock device (not included).
Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
Dimensions: 14” x 6.5” x 1.4”

2110-236

Linear Shaft Output Assy HSLG Ups

178B45

LiftMaster Curved Door Arm (K10-10203)

Also known as: 1010203 105004 10-10203 K10-10203
For use with various LiftMaster® Medium Duty Commercial Door Operators

P-9931R

Pulsar 1-Channel Receiver 318 MHz

Allstar compatible
Single channel receiver
24V AC/DC
8 dipswitches 318 MHz

41151R

Genie Light Kit Wall Mount

Bluetooth Light Assembly for the Genie #6070 & 6170 Wall Mount garage door opener.
Replacement light kit for 39945R

VGD-RB-1/2T-10

VGD Red Beast Lever Hoist 1/2 Ton 10ft Chain ** Price by Quote

Compact design
Light weight robust construction
Fully machined lifting wheels
Grade 80 alloy load chain
Sealed bearings
Triple spur geared guarantees ef cient/reliable operation

.......more details

OPH-6533-M-N1-RH

Manaras Opera-H 3/4HP 600V 3Ph with Monitored ECB and N1 Photoeyes RH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

CHAIN061

Manaras #410 - 1R26P (Incl. 1 C/L) 13" Long

18205

Wiring Harness 66" long

For use with Rite-Hite dock levelers

E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

Used on the BL229 gate op.

OTBH-6113-AM06

Manaras Apt-Style Trolley Op 3/4HP 120V 1Ph Monitored w/N1 Eyes Silencio

The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
Dimensions: Back Room: door height + 4'5" (1350 mm)
Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel

GALV-234-2-144-L

Galvanized Torsion Spring .234 x 2" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

CGH753L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod 3/4 HP 208/230/460V 3P L5 - Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

LEDSTRIP006

LED Light Strip (1 Unit) Red/Green/Blue 120" 24VDC

An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option

Installation Manual

OSH-6533-M-N1-RH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

SPRAY-523

Aluminum Touch Up Spray Paint 350g Slate / Charbon #523

350g

GDI-HB340

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

GDI-HB310

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft UL-325 Photo Eyes Extra

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

41181R.S

Genie Main Control Board Kit 6070H 6170HB

Primary electrical and logic interface for Genie's 6070 and 6170 Garage Door Openers
DOES NOT include the Genie Aladdin Connect Control Board #41153R

MOD027B1

Manaras Universal Aux. Output Module B070 Red/Green 24V Modification

MOD027B1 modification only when bought with operator
Order MOD027B1 when ordered in conjunction with a commercial operator
Works with BOARD070

104-0011

TNR Chain Tensioner CT3201 ELS16-B1

Ansi #80

461-0004-12

Richard-Wilcox #31 Square Track 12ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

K79-13493-600

LiftMaster Logic Board Replacement FDC5021UR

Replacement board for fire door model FDC5021UL

DEV-RSSD-3000

Devanco Rolling Steel Service Door 3000 20GA Non Insulated Galvanized Slats **Made to Order

Model 3000 roll up door is complete with a curtain hood guides counterbalance and option for operation such as chain hoist manual lift electric operator.
Pricing varies according to size and options selected.

ZAP-8825-3

Zap 8825 Series-3 1HP 115V Medium Duty Jackshaft Op

Compatible door sizes: Up to 240 sq. ft./1200 lbs.
Contains the motor two pulleys & one belt
Requires 7” side clearance & 3 ½” clearance above center spring shaft
Features include auto close timer cycle counter and service due reminder
Auxiliary capabilities include interior/exterior lighting wall controls swipe card devices dock equipment motion sensors alarm systems & more
Simple installation of motor assembly to spring shaft

.......more details