Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
H12G11-SS

Hinge #11 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G10-SS

Hinge #10 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
PS243F

Adjustable DC Power Supply 6V/12/24V 3 AMP

  • 3 preset output voltages : 6/12 and 24VDC (an adjustable mode is also available with a jumper setting)
  • Full adjustment from 2 to 24VDC if required
  • Maximum 3 amp (Output at 70 deg. F and free air)
  • Regulation:97.5%
  • Maximum input voltage 36 volts
  • Fuse protected
    • .......more details
Wiring Diagram / Diagramme de raccordementSpecifications / Spécifications
V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

  • Bead diameter 3/16" - 7/32" +/- tolerance
PS324

Nice Battery Backup

  • Kit of 24 V batteries complete with battery charger for powering automations for automatic gates and doors in the event of a mains power failure
  • Ambient Operating Temperature: from - 20 to + 55°C (battery efficiency is reduced in proportion to a decrease in temperature at -10°C efficiency is 30%; the battery lifetime decreases on an increase in temperature; at 40°C lifetime may be reduced to 2 years)
26CW94325

Truck Door Bottom Panel with Seal (15" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
9372263800

Square Torsion Spring .375 x 6 x 38" with Cones LHW 1-1/4" Bore

PULLEY007

Manaras Clutch Pulley 8" x 1" bore

1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
02-108

Push Button Station 3-btn O/C/S Flush Mount Stainless Steel Faceplate

  • Nema 1
  • Standard 2X4 electrical junction box with stainless steel faceplate
  • OPEN/CLOSE/STOP allows complete control of the door
1224-2-WHITE

Elton Commercial Window for Flush Doors 2" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

20-1050B-2RLP

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

  • Replacement motor for APT
  • Also known as 20-1050B-2RL 20-1050B-2R K20-1050B2R
  • For L3 and L4
C-600-114-INSTL

Cones 6" 1-1/4" bore Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF600-114
.437-6-L

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
19-48047MN

LiftMaster Roller Chain #48 x 47 Nickel Plated

  • #48 x 47 pitch with master link
9291644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones LHW

MH00008

Micanan Collar 3/4" ID

  • 2 required per door
FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

  • Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
  • 304L rust-resistant stainless steel
  • 12 gauge
S142BRNN924

Carlo Gavazzi Amplifier 24V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
    • .......more details
124844

1" Nylon Bushing

UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
  • 5-1/8" hole center to hole center distance
  • 3500 lbs load rating
MD-00035

Micanan Offset Link #410

ST-ENDCAP

Soft Touch End Caps Sold Individually

ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

CP-BRG-58

Lynx Bearing 5/8"

  • 6 in total on a MCJH
ST-PROFILE

Soft Touch Profile Sold per Foot

  • Yellow air-wave edge
  • Fits most standard 1-5/8" retainers
  • 300 feet in a roll
RA-AD-WKP-05

Lynx 5-btn Wireless Keypad AD455 372 MHz

Programming InstructionsCompatibility chart
1104-7'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1005-1-1/2-10'

Aluminum Bottom Retainer U-Shaped 10' Long

  • For door thickness 1-1/2"
Z9205

Door Scale Arm

  • Counter balance lever arm and a common bathroom scale will allow you to weigh a door up to 1250lbs
  • Set door on shaft and multiply scale reading times 5 to give you the door weight
  • Bathroom scale not included
Drawing
118798

Marantec Trolley Assembly (Slider)

  • Replaces #8030177 and #803178
  • Replacement trolley assembly for chain & belt rail assemblies
  • Fits Marantec opener models: M4500M4500eM4700M4700eQ7500Q7700
  • Works for 7' 8' & 10' high doors (red pull cord rope can be adjusted to length accordingly)
  • Note: will not work for the Heavy Duty (2mm-14ga.) rail assembly
  • Same part number as 91570
    • .......more details
MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

  • Flexible magnetic material with an embossed finish
  • 100 piece contains ten each of numbers 0-9
  • Priced per box
BOARD070MR

Manaras Replacement Control Board (Monitoring)

  • On-board 390MHz radio receiver accepts 50 remote controls
Replacement ChartGuide de remplacement
MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

  • Provides LED visibility on both sides to 12 ft. arm.
MT-1B

Linear 1-btn MegaCode Block Coded Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Operate LED
  • Visor clip included
  • Sold in lots of 10
  • Power: 9-volt battery
    • .......more details
26966A

Genie Idler Pulley for Stealth Chain Drive

  • Fits Genie Stealth model
  • 1/4” bore
  • Channel style rails
1104-9'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
PRO-GH-10011-U

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MODKIT013A

Manaras Timer to Close Kit 0s-100h Med-Duty

  • Timer To Close Kit for Manaras Commercial Door Operators with reversing contactor style control box.
  • Includes Timer base and all required wiring
  • Detailed installation instructions are included
Installation Manual
K72-33841

LiftMaster Shaft-Sprocket Assembly Clutch MH

  • Kit includes: Compression spring Cotter pins and Bearing
EX220-1K

Heddolf 1-btn Long Range Transmitter 433 MHz with antenna

  • 1 button gate and garage door opener transmitter
  • Up to 1500 ft range
  • 10 dip switch format
  • Includes antenna
  • Same as ER220-K
Programming Instructions
PBS3-RED

Replacement Button Only - Red

  • Replacement button for 02-403P
MK-00011

Micanan Radio Control Terminal Strip

MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

15-19478

LiftMaster Sprocket Assembly

  • For model H (2005-present)
  • 48B32T with hub
MK00643

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Field Install

  • Auxiliary device logic board
  • Controls red/green lights
  • Provides Normally Open dry contacts for fully open or close positions
  • Normally Open dry conatcs for door opening or door closing cycle
  • Works on circuit boards: MK00641 MK00642 MK00701
  • Includes installation hardware
    • .......more details
Instructions Manual
PRO-APT-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
OTH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

  • The OTH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
1003-6.5-PER-FT

Bottom U-Rubber 6.5" Black Sold per Foot

OSH-6233-CONT-L

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
OSH-6112-CONT-R

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
JDMG-LG-2030

GDI Jackshaft DC 115V

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
Sell sheetTechnical document
BCSI-HV-100-21

Industrial Slide Gate Operator Variable Speed 1 HP 240V 1 Ph with Heater ** Price by Quote Only

  • Heavy-duty alminum cabinet Nema 3R
  • Programmable logic controller
  • Adjustable friction clutch
  • Thermostat controlled heater
  • Opening / Closing speed of 24" / sec
  • Nema 4 control panel
    • .......more details
Installation manualSell sheetBrochureInstallation overviewDessin de installationDiagnostics and troubleshootingDiagnostics et dépannage
.262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
CP-SH-58-1038

Lynx Complete Limit Shaft Assembly for MCJH

  • 5/8" x 10-3/8"
  • Same kit used for HDC except the HDC has 1 extra 5/8" space washer
MM00011

Micanan Brake Solenoid Cover

D525-54-HL

Cable Drum High Lift 54" D525-54HL Torque Force Pair

  • Maximum hi-lift: 54"
  • Capacity: 500 lbs per drum
  • Max. cable size: 3/16"
  • Cable length: Floor to shaft center 66" minus amount of Hi-Lift
  • Cross reference: DNS 54 OMI 54HL M134-1375
3BXT

Control Station Exterior Surface Mount O/C/S N4 Non-Metallic

  • Double pole contacts
  • H=5-3/4" W=2-3/4" D=2-1/2"
  • UL Listed CSA Approved
BG790-50-11

LiftMaster Industrial-Duty Wishbone Barrier Gate Operator 1/2 HP 115V Arm & Weight Included ***Must include Counter Weight G658056 and Arm G651208R***

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • Includes a 24' arm
Installation ManualSell Sheet
8086.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Roadside with Cones

  • An original Whiting assembly
OSH-6114-CONT-R

Manaras Opera-SH 1HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
7001-WG-16-MO

Residential Wood Grain Side & Top W/S Medium Oak 16' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-9-MO

Residential Wood Grain Side & Top W/S Medium Oak 9' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-7-MO

Residential Wood Grain Side & Top W/S Medium Oak 7' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-10-DO

Residential Wood Grain Side & Top W/S Dark Oak 10' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-9-DO

Residential Wood Grain Side & Top W/S Dark Oak 9' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-7-DO

Residential Wood Grain Side & Top W/S Dark Oak 7' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-9-CO

Residential Wood Grain Side & Top W/S Cherry Oak 9' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
97799

Marantec Shark Tooth Position Reference Tab Belt Rail (96834)

  • Same as part number 96834
  • For belt rail
Replacement Instructions
39-16759

LiftMaster Clutch Pad for EGJ ***NLA NO SUB

COVER048

Manaras Plated Solenoid Cover for OSH

  • Cover only
26-40410

Truck Door T-Style Standard Side Seal 116"

  • Extruded from long lasting rubber
  • Seal protects cargo area from dirt and moisture
  • Used with standard J channel vertical angle with 1" track
  • Length: 116"
  • Cross reference: T #69840 W #4019 620200
TC134-10

Top Cap 1-3/4" 10 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
1005-2-8'

Aluminum Bottom Retainer U-Shaped 8' Long**Actual Length 8'1"**

  • For door thickness 2"
CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

  • Galvanized cable 1/8" 7x7 500ft spool.
  • A higher quality cable than the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.295-134-R

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.295-134-L

Cut-to-Length Torsion Spring .295 x 1-3/4" Left Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
S2TR2641E1

Erone 1-Channel Mini Transmitter 433MHz

  • Open/Close remote for 1 door
  • Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
  • Learn button programming
  • Ergonomic stylish design Rugged & durable
  • Light grey base with yellow buttons
  • unobstructed range: 820 ft (250m)
    • .......more details
Sell SheetBrochureWireless System Chart
MHH-002

Magnetic Handle Set Black Set of 2

  • Decorative handles only
  • Black flexible magnetic material with deep embossed design
  • Mounts flush on door
  • Sold as a set of 2 handles
29-ABC-15

LiftMaster Fuse 15A

  • For VSL595 gate operator
K20-1075B-2P

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph Contactor Model

5001-16-CHARCOA

Residential Side & Top Weather-Strip 16' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
1104-ASFT-8FT

Elton Aluminum Stiffener for 1104 8ft

  • Prevents the 1104 from buckling in the hot sun
1104-ASFT-9FT

Elton Aluminum Stiffener for 1104 9ft

  • Prevents the 1104 from buckling in the hot sun
1104-ASFT-10FT

Elton Aluminum Stiffener for 1104 10ft

  • Prevents the 1104 from buckling in the hot sun
K-T5011L4

LiftMaster Electrical Box Replacement Kit L4 K-T74-33015-1 ** Price by Quote Only

  • For models APT T SD 115V 1Ph L4
1104-ASFT-7FT

Elton Aluminum Stiffener for 1104 7ft

  • Prevents the 1104 from buckling in the hot sun
SBPFL205-16

Pillow Block Flange Bearing Football Style 1" Bore SBPFL205-16

2376.162_18.750

Whiting Torsion assembly .162 wire size 18" spring length 75" shaft

MD-00030

Roller Chain #40 10' per Pack

  • Includes (1x) master link
GUIDE014

Manaras Chain Guide

MAW123-BLK-U

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
CAPACITOR008R

Manaras Capacitor 440-648uf incl. Bleeder Resistor

  • Used for 3/4 HP 120/230VAC 1 ph motor255 374 & 258
  • Also for 1 HP 120/230V 1 ph motor350
DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

  • Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
  • Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.
    • .......more details
Installation Manual