Devanco Canada - Get The Right Garage Door Opener‎ and Parts

39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40045

HSCC112

Hinge Combination Hinge Clopay Style 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish

MO00001

Micanan Cam Plate Compression Spring (.178 ID)

2 required per operator
.178 ID x 032G x 55L)

MJ00004

Micanan Clutch Plate Aluminum 3/4" ID

MD-00057

Sprocket 50B36 1" shaft 1/4" KW

36 tooth sprocket for #50 chain

308911

Linear 1-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

10-1000-10FT

Strip Curtain 10' x 24" Angle Mount - 8" LT PVC - 4" O.L Clear

10 ft wide x 24" high
Mounting bar sold separately

97-75004

DOT-C2 Reflective Tape 150 ft x 2" W 11" White x 7" Red Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

4011-12FT

Aluminum Retainer only for Light Brush or Vinyl Insert 12' Long 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
For applications that require dual brush or brush and vinyl

IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

1 ft L x 2" H x 3" W

9382054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones RHW

41.25" long = 160 coils

K75-51048

LiftMaster Cover with Crank Housing for SL3000 **DISCONTINUED

HD polyethylene cover

27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

Single - Loop
27" long 48" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator is equipped with electronic circuit board or if it is hard-wired

MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

For 1/3 HP and 1/2 HP operators only

4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

Replacement arm only - no stripes old style

H031

Rolling Steel Slide Bolts and Holder Fire Door

66003102

Rolling Steel Universal 1/2 Slat Sold per Foot

4JW-RIGHT

Rolling Steel 3" Curved Cast Windlock 273004 RH

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

7096

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Curbside (RH)

A Whiting original
Cable drum and bearing

SLT14-18

Rolling Steel 3" Flat Slat 18-ga Galvanized

SLT17-22P

Rolling Steel 2" Flat Slat 22-ga Primed

.375-3-3/4-LH-C

Torsion Spring .375 x 3-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 3-3/4" Length: 12 ft

.363-6-LH-C

Torsion Spring .363 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .363 ID: 6" Length: 12 ft

.331-6-LH-C

Torsion Spring .331 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 6" Length: 12 ft

.306-6-LH-C

Torsion Spring .306 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 6" Length: 12 ft

.295-5-1/4-RH-C

Torsion Spring .295 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 5-1/4" Length: 12 ft

.283-2-5/8-LH-C

Torsion Spring .283 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 2-5/8" Length: 12 ft

.273-2-RH-C

Torsion Spring .273 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .273 ID: 2" Length: 12 ft

.262-3-3/4-RH-C

Torsion Spring .262 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .262 ID: 3-3/4" Length: 12 ft

.262-2-5/8-LH-C

Torsion Spring .262 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .262 ID: 2-5/8" Length: 12 ft

.250-1-3/4-RH-C

Torsion Spring .250 x 1-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .250 ID: 1-3/4" Length: 12 ft

.243-2-RH-C

Torsion Spring .243 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .243 ID: 2" Length: 12 ft

.234-2-RH-C

Torsion Spring .234 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 2" Length: 12 ft

.225-1-3/4-LH-C

Torsion Spring .225 x 1-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .225 ID: 1-3/4" Length: 12 ft

DF090.2

Whiting Dry Freight Door 3/4" without Track or Balancer

Original Whiting dry freight replacement door for serial # 99164

MK00650

Micanan UPCHARGE for N-4 Photocells in Lieu of Nema-1 Reduction for N1 Included. **Obsolete Repl by MK00697

In lieu on the standard Nema-1 photocells supplied with the operator

Installation Manual

MGR20-Y-2U-05

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

Installation Manual Sell Sheet

CHAIN058

Manaras #410 chain 48 Pitch (24" long)

OGH-6236-ECB

Manaras 2 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OGH-6215-ECB

Manaras 1-1/2 HP 240V 1Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

201-300-301-01

Equinoxe Long Range Transmitter O/C/S for 1-Door 433 MHz New Generation

Open/Close/Stop remote for 1 door
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Year 2016 + (red sticker under batteries)

Programming Instructions Instructions de programmation

OTBH-6533-1-ECB

Manaras Trolley Operator 3/4 HP 600V 3 Ph with Electronic Circuit Board

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation Manual Sell Sheet

OHJ-6234-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 208V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OHJ-6232-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 208V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OHJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V 1Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

OPH-6534-ECB

Manaras Opera-H 1 HP 600V 3 Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

OPH-6234-ECB

Manaras Opera-H 1 HP 208V 3 Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

OPH-6233-ECB

Manaras Opera-H 3/4HP 208V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

OPJ-6434-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 480V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

OPJ-6234-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 208V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

OPJ-6114-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 120V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

OPJ-6432-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 480V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

OPH-6212-ECB

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

V1104-WHITE

Replacement Vinyl Only for 1104-White 200ft Roll

Sold in 200 ft rolls only

37845R

Genie Screw Drive Carriage Assembly

Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
Works with Screw Drive Shuttle assembly part # 36664R - sold seperately

MX00150

Micanan Complete Clutch Shaft Assembly for PRO-HHD

104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).

801

Fasteners Sleeve Anchor 5/16" x 1-1/2" 100/Box

Secure anchoring into concrete brick or block

MX00140-110V

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Outside - New Model ** DISCONTINUED

733

Fasteners Flat Washer 5/16" Zinc 1000/Box

H8064HCLL

Polycarbonate Hinged Enclosure Clear Cover Locking Latch

Dimensions: 8 x 6 x 4
Stainless Steel locking latch
Nema 4X

MA025

LiftMaster Padded Barrier Arm Yellow 12ft

For use on Mega-Arm gate operator

Additional arm accessories

.343-5-1/4-SQ-R

Cut-to-Length Square Wire Torsion Spring 31" long with Cones Right Hand

796

Fasteners Keps Nut 1/4-20 1000/Box

Lockwasher & nut combination

41A5389-1E

LiftMaster Receiver Logic Board

For low profile screw drive models with one light
Fits models 2110 2220

Replacement Instructions

99553NYHNG

Nylon Hinge Black #3 *** To extent of inventory

Equivalent to 14-ga in strenght

SSZP17-1

Solid Shaft 1" Keyed Zinc Plated 17'-1" ** to extent of inventory

K75-10387

LiftMaster Slider Assembly for APT

H505L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

H505L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

H751L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by the RBH751-RH

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

MA021

LiftMaster Nylon Arm Nuts 50/Pkg

For barrier gate models MADCBB MATDCBB MASDCBB & MASTDCBB

7001-7-CREAM

Commercial Side & Top Weather-Strip 7' Long - Cream 7001-CC (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (20)

7001-8-SANDSTNE

Commercial Side & Top Weather-Strip 8' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (20)

3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep