Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
OTBH-6533-M-N1

Manaras Trolley Operator 3/4 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
E/BLOP/118

Automatic Systems Option Double Limit Switch

OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
MA005C

LiftMaster Slip Clutch Option Mega Arm

  • This is a replacement slip clutch option for Mega Arm gearbox
TDC7-12

Liftmaster Comm. 12FT Trolley Angle set (10-5812-P x 2) and #48 chain pack (TDC48-12) ***Actual length 179"***

  • Double Angle Rails for doors up to 12'6" high
  • Includes #48 chain pack
PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
70598.000

Todco 1" Nylon WondeRoller

  • Special Order Item
  • Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
  • A fully sealed bearing to keep dust and debris out
  • 2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
  • Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
  • Roller prevents build up in bearings with a sealed external washer
    • .......more details
12-1009

PVC Strip 6" x .060 Standard Clear Smooth for Replacement Strip Curtain Sold per Foot

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
BEA-10EABA

BEA Bracket Accessory for Eagle Artek

2200-540

Linear Replacement Key for BG Snap Lock

CAMPLATE019

Manaras Cam Plate Opera C-Box

2100-1738

Linear Drive Shaft 1" Slide Gate HSLG

GLASS-ONLY

Elton Sealed Glass Only Clear Made to Order Quote Only

  • Thermal replacement glass only
11442

Limit Switch w/Roller Wheel Lever for MBAR

  • Used on M7BAR Ops
GALV-218-2-144-L

Torsion Spring .218 x 2" x 12ft LH Galvanized Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-234-2-RH

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
TRACK005

Manaras 1 Piece Galv Track 2x2x16'6 ** 1 pc Only

  • 2 pices are required to make 1 set of tracks
  • Does NOT include the chain
E/BLOP/121

Automatic Systems Option 1 Kit 2 LED Lights on Arm

  • Increases visibility of the arm on BL229 gate operator
MR00001

Micanan Brake Disconnect Cable 3/32" x 12" Long

041-0180-000

LiftMaster Wiring Harness Camera/LED Pod Dual Lens

  • This replacement kit is compatible with the follwoing models: 84501 84602 85702 85702 87504 87802 B4603T B4603TC B6713T B6713TCH B6753T B6753TCH
OTBH-6112-M-N1

Manaras Trolley Operator 1/2HP 120V 1Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
  • Includes PHOTO-070
    • .......more details
IRB-RET-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X With Hood New UL325-2018 ** To Extent of Inventory

  • Kit includes photoeye with hood reflector with hood and mounting bracket
  • Retroreflective configuration
  • UL325-2018 compliant
  • Six (6) monitoring interfaces
  • 60 ft. operating range
  • Easy installation and set-up
    • .......more details
GHX-383-1HP-LH

Doorlec Explosion Proof Gear Head 1 HP 208V 3PH ECB Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
50304

Doorlec Hoist Shaft Kit w/Disconnect Coupler

  • For models LJH LJHW
ZAP-8070

Zap Auto Lock 8070

  • 8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation
K41-0247-000

LiftMaster Limit System INSL24UL/IHSL24UL

  • Compatible with the following models: IHSL24UL INSL24UL
ME120-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
SPR41B18X1

Sprocket 41B18 1" Shaft 1/4" keyway

  • Same as MD-00145
7-6137

Richard-Wilcox 1x#31 Lock Joint Clip

  • Used with #461-0004 track
19-40100-SS

Roller Chain #40 Stainless Steel 100ft Pack

  • 100ft length Stainless Steel
OSH-6213-CONT-RH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
DEV-RSSD-4000-INS

Devanco Rolling Steel Service Door 4000 20GA Insulated Galvanized Slats **Made to Order

  • Model 4000 Insulated roll up door is complete with a curtain hood guides counterbalance and option for operation such as chain hoist electric operator.
  • The insulation shall consist of closed cell urethane foam injected insulation a minimum of 1 inch thick providing a 7.2 R-value and sound barrier protection with an STC 25 rating.
  • Insulation is pressure foamed in place bonding both the front and back slats while filling all voids and creating a thermal break.
  • Pricing varies according to size and options selected.
HAE00073

Linear Main Cover for LDCO841/863B

Replacement Parts List
RR-3-11-6202

Roller 3" UHMW + Rubber 11" Stem Black

  • 3" UHMW tire covered with rubber
  • 6202 sealed precision bearing
  • 11" zinc plated stem
  • Rating: 200lb load; 100000 cycles of a 12' door
  • Helps quiet the operation of the sectional door
MINIDEPTH001-MOD

Manaras Minimum Depth Mod. OTH OTBH

  • Always use chain #41 with this mod.
K75-10388

LiftMaster Chain Tension Kit APT

  • Also known as: 305105371
CAPXLTK

LiftMaster Trim Kit and Back Kit

  • Trim ring and back box for CAPXL.
  • Conceal openings left from other systems in flush-mount Infinity L and Icon installations.
  • Dimensions: Outer Trim – 23.75” x 19.375”
GHW-383-2

Doorlec Industrial Gear Head Door Operator 2 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
    • .......more details
821LMC-SENSOR

LiftMaster Extra Door Sensor for 821LMC White Units **to extent of inventory

  • Add control of your second garage door opener to Smart Garage™ Control myQ® Smart Garage™ Hub or myQ Garage®.
  • Secure control and monitor your second garage door through the myQ app.
  • Easy installation and programming.
TRACK-SET-3-134-8

3" Tracks Set 8'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

CABLEKIT001

Manaras Comm. Receiver Antenna w/15' Coaxial Cable

5009-801-PAINT

Aluminum Touch Up Paint Nail Polish Style White / Blanc #801

  • Glass bottle and brush applicator
CP-LX300

Lynx Interface Board for UL325 models

  • For use on 460V & 575V 3 Phase only
111-0061

RW Box Track #33 Black 10ft

  • Finish: Black enamel
SR-9004-BLACK

Elton Reverse Angle Clip-On Vinyl Black 200ft Roll

  • Side Use – Clips onto Steel Jamb
  • Also for Residential Use
426-0914

Richards-Wilcox Galvanized End Cap T175-24" RH

BK600/PR-USA

End Bearing Plate Flanged 8-GA 6" with Bearing. Commercial Sold as a pair

  • For commercial applications Used on wood jambs
  • Includes (1) RH and (1) LH plate with bearing C16-32F
  • EBF6" offset USA Style
  • 1" ID
TRACK-2"-RAW-8

Raw Vertical Track 2" 8'-0" Sold per Piece

K23-20523

LiftMaster Interlock Switch 125/250VAC 3A N4

  • For use with various LiftMaster® Commercial Door Operators
19-80HL-NP

Half (Offset) Link #80 Nickel Plated

  • For #80 chain
BEARING047

Manaras Flange Bearing 2-Bolt Black for 1' bore

  • 2 set-screw holes 1/4-28 at 90 degrees. Set-Screws NOT included
  • Replaces BEARING012
DS50

Light Commercial Non-Insulated Rollup Sheet Counter Door

  • Max Width: 12’
  • Max Height: 6’
  • 26-gauge galvanized steel
  • Manual lift operation
  • Slide bolt or curtain lock
308301

Linear 2-Channel Multi-Code Key Ring Transmitter 300 MHz

  • Open/Close remote for 2 doors
  • Compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Programming instructions
MF00048

Micanan Round Head Slotted Bolt 1/4-20UNCx1-1/4" Full Thread

  • Used on various Micanan operators
  • 2 required per operator
MM00082

Micanan Solenoid Support Bracket (MSI0085)

ACP00922

Nortek LCD Display Assembly AE5/AE1K ***NLA***

  • Replacement screen only
77

Whiting Steel Outside Cam Lock Black Standard

14-1056

PVC Roll 12" x .120" x 200ft Roll Low Temp Smooth for Replacement Strip Curtain

  • Clear and smooth. Suitable for most average applications.
  • Temperature Range: -34° C to 65° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
GX-175-S-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - 2 wide shadow lines at the top and bottom of each panel - Common commercial profile - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
MODKIT065D

Manaras Trolley Hoist #41 Brake Release Kit No Shaft Field Install

  • Modification kit for in-field upgrades
  • Hand chain sold separately
MX00218

Micanan Clutch Shaft Assembly for PRO-LH

E/1929/022

Automatic Systems Round Arm Ass'y 10' (BL229)

  • Used on the BL229 gate op.
LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
41D8260

LiftMaster Cover 8355W

  • A one piece LiftMaster® "Silver" Replacement Cover.
  • For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers
K77-19130

LiftMaster Hardware Kit LA400 LA412

41D4509

LiftMaster Motor Kit ATS211

  • Also known as: K75-16424 41D4509 123D0155 123D155
Q238

LiftMaster Gate Adjustment Switch K75-50339

  • This replacement kit is compatible with the following models: CSW200 CSW200U CSW200UL ROBO SWING
ULT-PLG-D-TEK

EMX Industries Ultra Loop Plug-In Loop Detector Dual Output 2670-1

  • Trademarked Detect-on-Stop technology
  • Easy install with trademarked UltraMeter display with 10 sensitivity settings
  • Sold-state output indicating vehicle presence
  • Ignore cross traffic in tight spaces
  • Select for automatic sensitivity boost (ABS) delay fail safe/fail secure
  • Second output for pulse entry/exit normal/infinite presence
    • .......more details
SPR41B36X11/4

Sprocket 41B36 x 1-1/4" Bore 1/4" Keyway

  • Same as MD-00322
1224-2-BLACK

Elton Commercial Window for Flush Doors 2" thick 1224 Black Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
60-7531

Fasteners Wedge Anchor 3/4" x 5-1/2" 4/Bag

  • Secure anchoring into concrete brick or block
  • Ideal for mounting dock bumpers
  • 4 per bag
SPR50B36X1

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
GBU312EF-1

Gate Roller 3-1/2" x 2-3/8" Galvanized Sold Individually

  • Galvanized gate roller with bracket for 3-1/2" upright post
  • Works with gate pipes that are 2-3/8" thick or less
50442

Doorlec Mushroom Push-Button Red for 1-Door

  • Capable of opening one door
  • NEMA 4 Enclosure
  • non-lockable
INTERFACE001

Manaras Interface module Compatible w/PHOTO062

  • Enables the connection of monitored photoelectric cells to a Board or Electromechanical control without monitoring function
K20-3050C-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 L or M

  • Standard 1/2 hp motor
  • This is a replacement Motor Kit (1/2 HP 230/460V 3PH CF)
  • For use with various LiftMaster® Three Phase Gear-Reduced Commercial Door Operators and Slide Gate Operators
  • Also known as: 6002242 K20-3050C-4 203050 K20-3050C4 20-3050C-4 203050C4 20-3050C-4P
63001015

FAAC Limit Switch Assembly P740-741

  • For models 740-741
Z9966

Deuer Cable Puller

  • Light duty wire and cable gripping tool
  • For wire 1/16" - 1/4" diameter
  • Recommened for residential use only
  • 1300 lbs. capacity
CGH751L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
SHAFT036

Manaras Limit Shaft 5/8"-18x12

WASHER014

Manaras Type A Plain Washer 5/8

K32-37560-3

LiftMaster Gear Reducer 28:1

  • This is a replacement Gear Reducer (28:1). Compatible with LiftMaster® HCTDCU Overhead Gate Operators.
K94-37848-1

LiftMaster Electric Motor 1HP

  • Replacement motor for SL595101U
MB-03104

Micanan Electric Motor Only 1 HP 230/460V 3PH C-Flange TEFC 56C

  • For models GT GH GHC GSD
MDT-2A

Linear 3-Channel Visor Transmitter MegaCode 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1000000 codes
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
    • .......more details
Programming instructions
K20-3200C-5

LiftMaster Electric Motor 2 HP 575V 3PH CF

  • Also known as: 20-3200C-5 K20-3200C5 K20-3200C-5-H27
AVP-KEY

Cylinder Key for AVP-1

  • Key only
25-42-190

Extension Spring 7' Door - 190 lbs Light Blue

  • Single - Loop
  • 25" long 42" stretch 190 lb load
  • Sold individually
  • Rated for 10000 cycles
111854.0004

Overhead Logic Board 3/4 - 1 HP 208 460 3PH SX/HX UL

  • For RHX commercial ops. 3/4-1 Hp 3- phase operators
.393-334-R-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
620-100990

Linear Heater Kit Assembly 230V Cage Style

  • Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)
.319-6-R-C

Cut-to-Length Torsion Spring .319 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-600-Installed
.243-258-R-C

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-2-L-C

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.225-134-L-C

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.218-2-R-C

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PRO-GH-5021U-L

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand (PRO GHE)

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-H-5021-U-RH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
MK-00043

Micanan Overload Reset 1-Phase 15 Amps