Devanco Canada - Get The Right Garage Door Opener‎ and Parts

27-20307

Truck Door Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W # 2524 for # 2376 balancer

25-60050

Truck Door Latch Plate for Todco Roll-Up Doors

Steel construction Zinc plated finish
Contoured for proper lock engagement
Cross Reference: T #70093 W #4021 270700

RS1027

Roller 2" Steel 7" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 6.25" Overall Length: 7.25"
Box qty: 180 Box weight: 73.5 lbs (2-7-10 steel)

BK312

Jamb bracket J-12 #12 12 gauge

Sold by the piece
Height 5.0" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot accepts 5/16" track bolts

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

28103

Pillow Block Bearing Cast Iron 1" Bore

CP-SW-HOIST

Lynx Interlock Switch

H14G03

Hinge #3 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#3 position
Use between sections 3 and 4
Same as part number 243

.......more details

PD1614B000

NICE Aluminum Flange Bar 300MM Insert For MBAR up to 7M

788-037-2MX

Blue Giant Hold Down Assembly Rewind Style Compete

Holdown Aircraft Cable Rewind Style Blue Giant-Complete

TD-134

SteelCraft Therm-O-Door Commercial White 20-Gauge *** By Quote Only

THERM-O-DOR® sets the industry standard in overhead commercial and agricultural garage doors.
TD-134 R-Value: R-16 1-3/4" Thick
Available in White only
Sold by quote only

2807.200.280

Whiting .200 x 2-3/16 x 28" Curbside with Cones

OSHW-6112-M-N4-R

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

D1101KH

DoorBird Surface-Mount IP Video Intercom SS V2A Brushed

Video intercom including surface-mounting housing
LAN connection (PoE compatible)
2-way audio
Ultra-wide angle lens 1080p night vision IR LEDs
4D motion sensor
Keypad

.......more details

D1101KH_Installation_Manual Sell Sheet

K005-KEY

Replacement Key for 3BXLT Key #5

Replacement key only for key #K005

GALV-295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

K177A0112

LiftMaster Trolley Spring

Also known as: 177A112 62274 177A0112 062274 132C2180 177A78

SRDRKP

LiftMaster Keypad Smart Reader

LiftMaster Smart Readers offer a contemporary appearance and leading-edge feature set to add access control to any door or entrance in your building or community including mobile credentials capabilities.
Standard technologies include Proximity (125 KHz) Smart (1356 MHz) and Bluetooth so that customers can migrate to newer secure credentials.
BLE communication enables myQ Mobile Credentials within the myQ Community app and ecosystem.
OSDP Auto-Connect feature to switch from Wiegand to OSDP when connected to the OSDP port on the CAPXLV2.
Accelerometer - based tamper detection
Tri-State LED light bar for user feedback

.......more details

50450

Doorlec Mushroom Push-Button Red for 3-Doors

Capable of opening three doors
NEMA 4 Enclosure

CAPXS

LiftMaster Smart Video Intercom - S

Designed with small multi-tenant buildings and single family gated homes in mind.
With the myQ Community app residents can see who is at the door before granting/denying access.
Integrated wide-angle camera: Lets you view entrance through a live feed or recorded event.
Integrated BLE radio enabling myQ Mobile Credentials: Ultra-secure encrypted access with the resident’s smartphone.
Cloud-based security: Keeps data protected and safeguards residents’ information. *All LiftMaster Smart Access Solutions (including CAPXLV CAPXLV2 CAPXM CAPXS CAP2D and CAPAC) require monthly subscriptions to a myQ Community plan.

FAAC-SPEC-ORDER

FAAC Special Order Gate Product Price by Quote Only

Ordered to customer's specs

SP10W12V

LiftMaster Solar Panel Kit 12V 10W

Includes: (1) 10 Watt 12 Volt solar panel
Mounting bracket

P-831T

Pulsar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming instructions

BTM-VB-3.25

Devanco Bottom Vinyl U-Rubber 3.25" Black 250' spool

250ft spool of vinyl insert for sectional doors
low temp vinyl
perforations in the bottom to ensure that condensation escapes
Fits most standard bottom retainers

P-8833TC-OCS

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

Allstar compatible
OPEN-CLOSE-STOP 3 doors
8 dipswitches 318 MHz

Programming instructions

MTS1

Linear 1-btn MegaCode Transmitter 318 MHz (DNT00091)

Activates one 318 MHz MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Two CR2032 batteries included
Codes: 1000000+ (MegaCode format)
Dimensions: 3" W x 1.875" H x .625" D

.......more details

Programming instructions Instructions de programmation

R1P

Erone Radium + Paradox 1-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

Wireless System Chart

K32-11010

LiftMaster Gear Reducer 44:1 1-1/2-2 HP

Replacement Kit. Compatible with 1HP 1/2HP & 2HP LiftMaster® GH Model Commercial Door Operators
Also known as: 32-11010 3211010

39902R

Genie Wireless Wall Console GWWC-P

Completely Wireless Installation – No need to have an additional wired wall console -absolutely no wiring required for operation!
Works with all Genie Intellicode® openers since 2013. (Not compatible with Models 1022 1024 1042 2022 2024 2027 2042.)
Large buttons and attractive blue LED light makes the console easy to see in the dark.
The pulsating light has two optional speeds or can be turned off for maximum battery life.
Backlighting will turn red to notify the user of low battery.
Turn only the garage door opener light itself on at any time for steady light in the garage.

.......more details

K52C0481

LiftMaster Bridge Rectifier

Bridge Rectifier Converts AC to DC voltage
For powering DC accessories when AC transformer present
Small size with convenient mounting hole in center

CHI-FS-7522

CHI Fire Shutter 7522 ** pricing by quote only

Door meets 45-minute 90-minute and 3-hour UL ratings with full compliance to NFPA-80 standards.
Standard curtain provides a 1 ½” pre-painted hot dipped galvanized steel slats.
Smooth quiet drop testing thanks to a durable viscous governor.
Simple drop-testing and ability to reset the door which makes for quick operational readiness.
Standard bottom bar slide bolt locks with an optional cylinder lock.
Slat Thickness: 22 gauge Flat slats

.......more details

C-34X16-134-W-G/T

Thermal Window 34" x 16" for 1-3/4" Door White Frame Grey Tint Glass

For 1-3/4" thick door

15450

Doorlec Tubular heater 120V for Gate Operators

KCIEN-SBP

DigiCode Illuminated Keypad with Controller Built-in

Illuminated stainless steel keypad
100 user codes (4 to 6 digits)
2 form C outputs (6A/250V) timed (1 to 99 sec.) or latched
Audible feedback buttons
Request-to-exit input
Potted electronics

.......more details

LJH-311-3/4

Doorlec 3/4HP 115V 1PH Jackshaft Operator

Nema 4/12 now included (11/2025)

Technical information

BEA-10-LBA

BEA LZR Metal Bracket Accessory

Mounting bracket only for the LZR industrial sensors including: LZR-I30 LZR-S600 LZR-H100 LZR-U920/U921

Installation Guide

CDJH-12-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake optional **
Fully driven adjustable limit switches.

.......more details

VFOH5011

LiftMaster Variable Speed Front of Hood Op. 1/2 HP 120V with CPS-U

Front of Hood Mount for Rolling Steel Doors and Grilles.
Variable speed up to 12”/sec with smooth start/stop feature.
Floor level controls with intuitive menu driven interface.
Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard

.......more details

24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

For Stanley Chain/Cable Openers Only
Not for Stanley Full Chain Openers
Replaces Part #920-0147

LA400-JB40

LiftMaster Junction Box w/Cable 40'

SL585501UL

LiftMaster Industrial Slide Gate Op. 1/2 HP 115/230/208 Volt 1 Ph Heater NOT Incl. ***NLA

Features a heavy- duty industrial lockable metal cover
MyQ® Technology enables you to securely control and monitor your gate operator from anywhere
Homelink® Compatible (version 4.0 and higher)
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
Manual Disconnect when unlocked allows gate to be operated manually.
Quick Close and Anti-tailgate quickly secure property preventing unauthorized access

.......more details

A22KITB

Erone Web-Based IP 2-Door NANO Kit

Atrium 2-Door Controller Kit Web Based IP Hybrid
Module Embedded Web Server Includes 2 NANOPB (black mini proximity readers) 15 Credential Software
Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors)
On-board Ethernet Port with AES 256-bit encryption
Auto-detect hardware modules Quick and easy card enrollment procedure
Lock outputs: 2 (750mA @ 12VDC/each) Relay Outputs: 2 Form C relays

.......more details

Installation Manual Sell Sheet Wireless System Chart

MOTOR255

Manaras Electric Motor 3/4HP 120/240V 1PH

109290

Amarr/Alpine Snap Latch Supply Bag for 1 3/8" Thick Doors *** Price by quote only

Is needed when 105381: T-Handle Lock Kit for 1 3/8" thick doors are ordered or the lock won't work.

41A6689

LiftMaster Trolley Threaded Shaft D-Shape

For use with various LiftMaster® Belt Drive Garage Door Openers that utilize a T-rail.

100144

Linear Brake Shoe w/Lining

For commercial door operator

RBH105L5-RH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MIRCU-02

Miller Edge Universal Non-Monitored Interface

Converts a monitored pulsed signal to a non-monitored normally open signal
Creates a Fail Safe signal; reports a fault when power is lost
Ideal for use with pre-2010 commercial door operators

Installation instructions Sell sheet

NICE-OVIEW

NICE Oview Display Programmer

�
Type: control programming and diagnostics unit for devices equipped with BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands modification or parameters and monitoring of diagnostic data
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Operating temperature: from –20°C to +55°C • Dimensions (mm): 107 x 61 x h 20 (with wall-mounting support: 125 x 70 x h 32)

.......more details

120BH

12" Heavy Brush Insert 6ft Long

Polypropylene bristles

SL595101UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 115/208/230V 1 Phase - Heater NOT Incl. Reflective photocell LMRRUL included****NLA

Power: 115/208/230 VAC. Single Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.
Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

Q210

LiftMaster Gear Box Kit #70 K75-50224

For use with various LiftMaster® Commercial Swing Gate Operators manufactured after 1997

MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.

10PBJL

Jamb Push Plate SS with Handicap Logo Only

1⁄16 inch thick stainless steel for maximum durability
Concealed fasteners to minimize vandalism
Compatible with both surface and flush mount boxes
Faceplate Material 16 gauge 304 2B Stainless Steel
Backplate Material 1⁄8 inch thick Aluminum
Mounting Screws Stainless Steel 6-32 × 1 in & 8-32 × 1 in Allen Head Size: 5⁄64

.......more details

MP00106

Micanan Warning Light Red/Green Remote Mount Box

SOFT_EDGE-ENDCAP

Devanco Canada Soft Edge End Caps Sold Individually

SPRAY-562

Aluminum Touch Up Spray Paint 350g Commercial Brown / Brun Comm. #562/462

350g

DB13-T

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Tapered Sides Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details

LB1210-24

Laminated Bumper Standard Black 10" x 24" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

8010-7FT

LiftMaster DC Chain / Cable Drive Garage Door Opener with 7ft SSR Rail (1607LM) ***No Longer Available

Customized DC Motor with soft start/stop action.
Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
Security+2.0 increases remote control range and reduces interference for consistent operation.
PosiLock® electronically protects against forced openings.
The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)

.......more details

.331-6-L

Cut-to-Length Torsion Spring .331 x 6" Left Hand Wound Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER

E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

Increases visibility of the arm on BL229 gate operator

RB741

Linear / GTO 1-Button Transmitter 318 Mhz

Standard transmitter included with all GTO gate operators
Much smaller in size than previous model and improved signal range
The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
It is compatible with GTO and Mighty Mule gate operators
The code settings are the 9 dipswitches located inside the cover.
Measures: 2-1/2 H x 1-1/2 W x 9/16 D.

.......more details

HBS23LUD-H

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Double End Stile Heavy-Duty Sold per Pair

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For Low-Headroom Track
For 2" or 3" Doors
Fits 2" or 3" Track
Double End Stile

.......more details

OCDFX4

Overhead Door 4-Btn Transmitter 315/390 Mhz

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX4.S GIDFX4.S

ETOOL

LiftMaster Edge Cutting Tool***NLA

BK024/PR

Commercial 2" LHR Bottom Brackets Sold as a Pair (L & R)

Sold as a pair (includes one left and one right hand)
Same as BB-5 LHR Reinforced

APOW1

LiftMaster Transformer For Roboswing & Roboslide Gate Operators *** To extent of Inventory

Elite Robo plug in transformer was 18VAC now replaced by 25V California energy compliant
As of March 2008 transformer has been changed to a 25 VAC self resetting unit that is to be used as direct replacement for the old 18vac units

LITH-9V

Battery 9 Volt Lithium

HSO112

Hinge 1/2-Hinge OHD "A" Style 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish

28301

Insert Bearing Pillow Block Hy-Speed 1"

ASPP-205

42413

Pillow Block Bearing Housing Set GP-3

Can be fitted with bearing # 28301

37502

Doorlec DC-2000 Electronic Circuit Board for Constant Pressure Close

Works in all Doorlec model openers except R-99
Input power to board is 120V
24V DC available on terminals 9 & 11
Accessory power on terminals 1 & 11
Programmed to work with constant pressure to close

SD755L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 575V 3PH Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

37408-PREWIRED

Doorlec Reversing Contactor BF9 120VAC Prewired for Single Phase

CT751L5

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator with Carwash Mod

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

CHAIN031

Manaras Jackshaft Drive Chain #50 5' with Link

MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

WB-300

Skylink Multi-Function Wall Console ***For Old EQ Models

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

BL-08

Barlock Kit Complete for 8ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (49-1/2")

Assembly Manual

TRACKS-SET-3

3" Tracks Set with Wall Brackets *** By Quote Only

Custom order to customer's needs

7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

K72-13059

LiftMaster Output Shaft Kit APT

Kit contains: Shaft Bearings Roll Pins Washers and Sprockets (41B10 x 3/4" & 41B16 x 3/4")

37516S

Genie Belt only for 8ft Door

Replacement belt only for 8ft door
Fits Genie model Destiny 1200

K20-1050B-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4 TEFC

LM21XP

LiftMaster Extended Performance Fire Door Release Device

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting

.......more details

Installation manual

ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

19-5118

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door

For 3/4 & 1 HP trolley operators

.437-6-L

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

65_52091-14

LiftMaster Manual Hoist Mod. M8 #41 Chain for 14ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

Installation Manual

.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

14-1004

PVC Roll 8" x .080 Standard Clear Smooth 300' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

029-98090

T-Style UDI Replacement Door White Stainless Steel Pkg 029-98090

For openings within 98" w x 90" h
Hardware attached balancer assembly not included
Manufactured to exact size

HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

MA116

LiftMaster 17 ft Aluminum Arm Round Yellow/Black Stripes ***NLA Repl. by MA116RDOT

Used on Mega Arm gate operators
Requires counterweight model MA117 - sold separately.
Size: 17 feet long x 3" round
Arm opening area: 14ft (end of cabinet to arm tip)
Replaced by MA116RDOT

18FT-TROLLEY-SET

LiftMaster 18ft Double Angle Rail Set for Comm. Trolley Ops (2 pcs) *Actual length 251"*

Double Angle Rails for doors up to 18' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us