Devanco Canada - Get The Right Garage Door Opener‎ and Parts

25-42-80

Extension Spring 7' Door - 80 lbs Gold

Double - Loop
25" long 42" stretch 80 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

95-00116

Truck Door Rivet 1-1/4" Stainless Steel ** To Extent of Inventoy

Stainless steel construction
Round head design
Cross Reference: T #89217-0040

91-00506

Truck Door U-Bolt 1-3/4" long

Zinc plated finish
Used to attach cables to Whiting doors
Cross Reference: W #70-5

28-32072

Truck Door 2" Horizontal Track with 8" Radius 107" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
For use with 1" diameter rollers

DM11VL

Cable Drum Vertical Lift 11' 850-11 Pair

11' Vertical Lift aluminum die cast alloy.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
Rated Lift per Drum: 425 lbs.
Max. Cable Diameter: 3/16".
Mounting: 1" solid shaft with 1/4" keyway.

.......more details

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

25E10271

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Stud plate for 1 stud
Cross Reference: W #1370

25-10578

Truck Door Handle Keeper Only for Whiting Roll-Up Doors

Steel construction Black E-coat finish.
Keeper accomodates padlocks and trailer seals
Cross Reference: W #7515

DM518

Cable Drum Standard Lift 18' 5250-18 Pair

18' standard Lift aluminum die cast alloy.
Pair includes: (1) LH and (1) RH.
Color coded: Red=LH and Black=RH
Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
Max. Cable Diameter: 3/16". Mounting: 1" solid shaft with 1/4" keyway
Cross Reference: D525-216-1 DNS 5-18 OMI 2200

.......more details

DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads. -
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".

.......more details

EP2983

Exhaust Port 4" non latching long barrel *** Indefinate Delivery

Inside diameter: 4"
Outide diameter: 4-3/8"
Sleeve: 2" (non latching)
Flange: 6"
Includes fasteners & gaskets.
Polished aluminum finish.

.......more details

RS1037

Roller 3" Steel 7" stem 10 ball

Steel Roller Wheel diameter: 3"
Working length: 6.5"
Overall length: 7.75"
Box qty: 60 Box weight: 34.2 lbs (3-7-10 Steel)

903ADJORBX

Operator Reinforced Bracket 18-24" Adjustable Zinc Plated No Hinge (178651)

Also known as ARB brackets

903021ORBG

Operator Reinforced Bracket 21" Galvanized

Comes with clevis and clip pins. 24 per carton

BK258/PR

End Plate 2-5/8" flanged with bearing 13GA Sold as a Pair (L & R) (EBF 258)

Sold as a pair
Box quantity: 30

25-10200

Truck Door Top Bracket Assembly for Todco Roll-Up Doors

Steel construction Zinc plated
Heavy-duty design
Assembly includes: Base Slide Bolt & Washer
Cross Reference: T #69433 W #4039

6X12PO50

Devanco Loop 6' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

GTL-PLUS

Devanco Door Lube 454g Aerosol

Ozone Friendly Door Lubricant with anti-wear and extreme pressure additives.
Non-Drip formula provides long lasting lubrication and protection where metal to metal friction occurs. •Ideal for use on door tracks hinges springs rollers chains cables gears and more.
Available for private label
12 cans per case

Safety data sheet Fiche de données de sécurité

41C3196

LiftMaster Antenna for Co-Axial Receiver

Wire antenna kit same as what is supplied in a 312 / 412 HMC

MM00026

Micanan Cut-Out Sw. Activation Plate Gearhead (MSI0042)

V4564-BL-W

Vinyl Seal 4" Bottom Bead End 1/8" Bead Black - sold per foot

201-300-411-01

Equinoxe Long Range Transmitter O/C/S for 16-Doors 433 MHz New Generation

Open/Close/Stop remote for 16 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Year 2016 +

Programming Instructions Instructions de programmation

41D1624-2

LiftMaster Motor DC 12V RJO

This 12V DC Motor Kit is compatible with the following LiftMaster® Models: 8500W 8500WLA LJ8900W and LJ8950W

MD00017

Micanan Drive Sprocket 50B23 x 1" Bore 1/4" KW

CP-IDLER-ASSY-MR

Lynx Front Idler Assembly Chain TC3

831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

Three channels - three relay outputs
Textured aluminum case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters

Programming instructions Instructions de programmation

41A5047

LiftMaster Door Bracket Kit

Also known as: 12C582 12B198 12B374 062265 41A5047 12B374-2
Includes door bracket clevis pin and lock ring

TCG-2

LiftMaster Tri-Code Commercial Receiver ** DISCONTINUED

Two channel commercial receiver compatible with Linear Delta Multi-Code and Stanley radios.
Six 3' wired leads

Installation Manual

19-41ML

Master Link #41

For #41 chain
ANSI Standard Carbon Steel

Z9206

Door Track Anvil

Used as a pounding block to hammer mangled track back into shape
For 2" track

111883.0001

Overhead Logic Board for RMX

Replacement circuit board kit for the Overhead Door RMX commercial operator.
Replacement circuit board for the Overhead Door RMX commercial operator. UL 325 2010 compliant.
This circuit board replaces part #110955.0001

T103L5

LiftMaster 1 HP 208/230/460V 3P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

BK149/PR

Residential Bottom Bracket RBB-75 sold as a pair

For use with 2" straight track

AIRSWITCH009

Exterior Mosley Air Switch SPDT Plastic Housing ***NLA

.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 5-1/4"
Length: 12 ft

RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
Soft-Starts and Soft-Stops
Electrically activated drum-band type solenoid brake
Ceiling-mounted with 8.69" headroom clearance required below the tracks
Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
Tracks sold separately

.......more details

5001-WG-12-MOAK

Residential Side & Top Weather-Strip 12' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

Yellow T-astragal
Width: 4-3/8"

MV-00133

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Pilot Light 24V

27-20401

Truck Door Bracket for Torsion Assembly Curbside (RH) for Todco Roll-Up Doors

Steel construction
Zinc plated finish
Cross Reference: T #51036-1 W #4029 360100

315-KEYLESS

Micanan Wireless Keypad for PRO-315 KP303 ***NLA

Guardian model

PDC300-CH-OPTION

Pulse300 Chain Hoist Option Only

Added option to a Pulse 300 operator

2376.182.27.950

Whiting Torsion assembly .182 wire size 27" spring length 95" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

K26-438

LiftMaster Artisan Timer

For use with various LiftMaster® Speed Jack Commercial Door Operators
Also known as: 26-438 AB117-00121 G26438 438USA
The DIP switches are used to set the time delay period between 1 and 1024 seconds.
The timer has an internal 1 second delay opening of the DIP switches adds their corresponding value to that internal delay.
The switches to the right are all opened for a total delay of 1023 seconds adding that to the internal 1 second provides the full 1024 seconds.
Any time delay from 1 to 1024 seconds can be achieved by opening the appropriate switches.

.......more details

KEYSWITCH039

Replacement key cylinder with two keys for station079

CAPXLV2MC

LiftMaster Smart Video Intercom - L

Designed for High-Rise Buildings and Gated Communities
For 50 to 50000 units multi-family buildings and garden style communities.
Perfect for any entrance and beyond with 4 Wiegand Input 4 OSDP Readers and 8 Relay Output to control doors gates or any other relay-controlled electrical system.
10” HD touchscreen display fits in a surface flush or pedestal mount.
Wi-Fi** or ethernet for easier installation and connection to Cloud. 3rd party cellular modem can be used as well.
Wireless link to LiftMaster gate operators to eliminate the need for digging trenches at the gate.

.......more details

37520

Doorlec DC-2000 Electronic Circuit Board UL325 Requires Monitored Photocells (MUST incl. resistor)

Works in all Doorlec model openers except R-99
Input power to board is 120V
24V DC available on terminals 9 & 11
Accessory power on terminals 1 & 11
1 = Stop. 2 = Com. 3 = Open 4 = Close
Can be adjusted for constant pressure

.......more details

51-012862

Blue Giant Sensor Wand Assembly **Special Order

Price by Quote Only

31376-2

Doorlec Sprocket 60B65 2" Bore

GALV-331-6-R

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Galvanized Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER
Galvanized

GALV-331-6-144-L

Torsion Spring .331 x 6" x 12ft LH Galvanized Red/White

Wire size: .331
Inside diameter: 6"
Length: 12 ft
Galvanized

38252A.S

Genie Opto Wheel

The opt-wheel normally needs replaced if your garage door opener is short traveling in both directions (open and close) in the excess of 6 inches at a time then stopping.
Compatible with models: 1028 2028 1128 2128 1035 1055 2036 2035 2055 3035 3055 2033 3053 3155 7035 7055 7053 7135 7155

7-6134

RW Top Spring Bolt 514 x 3 1-1/4" sq x 9" Long

Bolt: Bevelled steel
Chain: Zinc plated 70" long with ring
Black Enamel finish

210-0202

Hormann/TNR Guide Bottom Lead In Hardware Kit LH/RH

L956W

LiftMaster Wireless Multi-Function Control Panel Security+ 3.0

Wireless control panel can be installed almost anywhere in the garage.
Includes a large push bar for garage door opener operation and a light control button.
Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
Compatible only with LiftMaster Security+ 3.0™ garage door openers.
No wiring required. Powered by CR2032 battery (included).
Warranty: 1 Year

.......more details

Installation Manual Manuel d'Installation Compatibility Chart 2025 Comparison Chart 2025

SW-500-ADAPTER

Devanco Industrial Spring Winder 500 for 3.75" - 6" Adapter for Richard Wilcox Torsion Spring Plugs

Adapter for SW-500 to be used with Richard Wilcox spring plugs
This adapter is 5 mm higher than the universal model

7131

Whiting Brush Side Seal Assembly; 7/8"

Quote required prior to sale to ensure correct fit

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H

028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

Price by Quote Only

P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

Allstar compatible
Three channel transmitter
8 dipswitches 318 MHz

Programming Instructions

C12

Felco C9 Cable Cutter 3/8" Capacity

The FELCO C12 a two-hand wire and cable cutter designed for precision.
Made with unbreakable forged aluminum handles and high-quality hardened steel blades
The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
Length: 19.69 in
Weight: 3.75 lb
Cutting diameter: 0.47 in

.......more details

461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

PB-001

Skylink Garage Door Wall Button

Install the Skylink Wall Button inside your garage.
Allows manual operation of your garage door opener.
Illuminated LED indication.
Easy to Install.
30-foot Wire Included.
Mounting Hardware Included.

.......more details

ETBH-311-3/4HP

Doorlec 3/4 HP 115V Trolley Door Opener with solenoid brake

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

H11G03-SS

Hinge #3 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

IP-MDS

CDVI Point of Entry Exterior Multi-Tenant Surface Mount Video Intercom System

Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
IP54 (recommended to be put under a canopy or covering)
Operating temperature: -10C to 50C
Stainless steel panel

.......more details

TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

Chain pack only
TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors

D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

Power Supply: 12-24 Volts AC/DC
Current Consumption: < 9 mA
Operating Temp: -40°F to 180°F
Surge Protection: Zener Diode /MOV
Output Relays (2): 1Amp 30 VDC
Loop Input: Transformer isolation lightning and transient protection (1)

.......more details

Manual - LP-D-TEK Spec Sheet - LP-D-TEK

BOARD076R

Manaras Replacement Power Board

Used on all Manaras circuit board type operators

GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

CPT215-PER-FOOT

Miller Edge Field Configurable Sensing Edge Cut-to-Length

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Minimum Length: 3ft

.......more details

BL229-EX1929-D45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Right Hand

R2T

Erone Radium Mini 2-Button Transmitter 433MHz

The RADIUM remotes are compatible with all standard 433 MHz RADIUM wireless receivers.
They have been designed with a high security coding system (KeeLoq® Hopping code).
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Range up to 820 ft (250 m)
Two CR2016 batteries included

Wireless System Chart

E/1907/012

BLG76 Backup Spring Assembly

22019

Doorlec Push Button Contact Block N/O

PRO-SD-10081-U-RH

Micanan 1 HP 208V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

E/1929/201

Automatic Systems Limit Switch Assembly

Used on the BL229 gate op.

MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

The transmitter comes standard with a NEMA 4 weather-proof enclosure
Compact design that allow for easy troubleshooting.
The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
Power Source: (2) 1.5 volts AA lithium batteries
Input: 2-wire N.O. sensing edge

.......more details

Installation manual Spec sheet

LPEXP

LiftMaster CAPXL Loop Detector Input Board

Automatically trigger a phone call to a guard or office when a guest arrives
Mounts inside of CAPXL
Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
Operating Temperature -20°F to 130°F (-29°C to 54°C)
Dimensions: 2.8” x 2.3”

OGH-6536-M-N1-RH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OTBH-6113-AM05

Manaras Trolley Operator 3/4 HP 120V Monitored Board w/Eyes Apt. Model

The OTBH model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
Also known as: 94-50287 K94-50287

19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

TDC1222-12

Liftmaster Comm. 12FT Trolley Angle set (10-5812-P x 2) and #41 chain pack (TDC41-12) ***Actual length 179"***

Double Angle Rails for doors up to 12'6" high
Includes #41 chain pack

S50E

LiftMaster Small Profile Ends Kit 10 Sets of 2

Fast easy to install and cost effective system no glue is required
One end for output wire other end with resistor for monitoring
Compatible with S50 Small Profile Edge
Includes: (10) sets of 2

GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GD-STEND-24D-2

End Cap Steel 16G 24" Double 2" Thickness

Galvanized Steel 16-ga (1.42mm) thick.

DC2000

LiftMaster Controller DC2000****Discontinued

DC2000 Controller with battery backup
BackUp Commercial Vehicular Gate Operator
12VDC - 30 Amps Max.
125 lbs. Max. pull @ CSW-200 Units
105 lbs. Max. pull @ SL-3000 Units

70225.000

Truck Door Todco 2" White Nylon Quiet Roller ** Price by Quote Only

200R

Chain Hoist Wall Mount 3:1 200R-41B36-1" Torque Force (244687)

Ratio 3:1
Sprocket: 41B36 Bore: 1"
Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
Pull load hand chain: 35 lb max

CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
Dimensions: 6.15” x 4.13” x 4.74”