Devanco Canada - Get The Right Garage Door Opener‎ and Parts

37845R

Genie Screw Drive Carriage Assembly

Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
Works with Screw Drive Shuttle assembly part # 36664R - sold seperately

MI00002

Micanan Pulley 8" OD c/w Bushing 3/4" ID

27150A

Genie Chain Bullet

Compatible with: Genie – PMX60 PMX65 PMX80 PMX85 PMX300-IC/A & B IC250 IC250B PMX500-IC/A & IC/B ALC SERIES RCD SERIES
Overhead Door – 496 496CD (/A&B ) 696 (/A&B) 777 777CD
PASSPORT 286-386 286CD-386CD
Connects the two chain ends and also is the piece that the carriage engages

1044622-REFURB

FAAC 400 Hydraulic Swing Gate Operator 115V Reburbished

Refurbished unit.
Tank body

.343-3-1/8-SQ-R

Cut-to-Length Square Wire Torsion Spring 24.75" long NO Cones Right Hand

AK-21

Linear Interior Digital Keypad***to extent of inventory

The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.

Installation Manual

35616R

Genie Dual Frequancy Intellicode Receiver Board

For models: PCG500ML PCG700ML GCG350ML 2020L
Works on 315Mhz and 390Mhz

9150000628

5/32" Stops ONLY 100/pkg

Stops only - 100 per pack

34516R

Genie Chain Glide Inner Slide ML Series with Magnet

For ML Series with Magnet: 350ML 500ML 700ML 800ML

33950S

Genie Down Limit Switch Assembly 138 " Wire

Magnetic limit switch for down direction.
The limit wire is moulded into the limit.
For Genie Excelerator Screw Drive garage door opener models: PRO99-IC CMD9900-IC ISD990-1 ISD990-2 ISD1000-2

SN1150050

LiftMaster Main Processor Board for MiniKey

7001-10-W/B

Commercial Side & Top Weather-Strip 10' Long - White/Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

3/8" bolt has 9/16" head
Max torque = 22
Full thread
Grade 5

MH00007

Micanan Shaft Collar 1" I.D

MD00017

Micanan Drive Sprocket 50B23 x 1" Bore 1/4" KW

.343-5-1/4-SQ-R

Cut-to-Length Square Wire Torsion Spring 31" long with Cones Right Hand

3X6SC50

Devanco Loop 3' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

7001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black (B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

Full length thread
Max torque = 6

788

Fasteners Hex Nut 5/16-18 1000/Box

765

Fasteners Serrated Flange Nut 3/8-16 1000/Box

Serrated flange face to provide locking

774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

5/16" bolt has 1/2" head
Max torque = 12
Full thread
Grade 2/Grade 5 depending on availability

BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

For residential applications. Use CBS-338 for commercial / industrial applications
Zinc plated 11-guage steel
1" bore bearing installed
Single clipped end

AELD

LiftMaster Elite Plug-In Loop Detector

For use with Omni Control board available on the Chamberlain commercial line.

Installation Manual

99553NYHNG

Nylon Hinge Black #3 *** To extent of inventory

Equivalent to 14-ga in strenght

29-31229

LiftMaster Relay 24VDC 30A SPDT 1-Phase only

C-relay for model T operators 10A

SSZP17-1

Solid Shaft 1" Keyed Zinc Plated 17'-1" ** to extent of inventory

CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

� The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.

Programming Instructions

MT22-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

19-5812

LiftMaster Trolley Chain Pack #48 for 12ft Door

Chain pack only

772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

CH505L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes
Comes with 02-403P NEMA 4 push button

Installation Manual Manuel d'Installation Sell sheet Brochure

K75-19985

LiftMaster Clutch Pulley Assembly

Fits model H operator with Logic 5

K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

230/460V PRIMARY 24V SECONDARY 20VA

11-19471

LiftMaster Clutch Shaft

Fits model H operator with Logic 5

LC2D129B7

Contactor Telemecanique 24V ** Discontinued

029-98200

W-Style Replacement Door White Stainless Steel Package 029-98200

Replacement door size between 96-1/4" - 98" wide x 90-100" high
Painted white
Stainless steel package
Includes Hinges Rollers and Cable

178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

Will work with most residential garage door openers
Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B

26-14625

Truck Door Top Panel (15" x 98") for Todco DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

7001-18-CREAM

Commercial Side & Top Weather-Strip 18' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (10)

MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

41AC175-2

LiftMaster Electronic Circuit Board Assembly

For Sears / Craftsman garage door opener

9150000670

Extension Cable 1/8" 7x7 14' Sold as a Pair

Cable assembly for extension spring door - looped one one end the other is raw (no stops)

1104-16FT-GREY

Residential Side & Top PVC Weather-Strip with cap 16' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder is replaced with BEST cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

Plastic replacement box only

SPR41B60X1

Sprocket 41B60 for a 1" Shaft

K72-19979

LiftMaster Clutch Shaft Kit 2005 +

Assembly includes: Clutch shaft keyed flange bearing dual sprocket 32/14 14-tooth sprocket E-ring compression sprocket chain wheel assembly pulley assembly chain guide assembly shim & thrust washers copper bushing 12-10882 and roll pins

27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

2704.177_270

Whiting Roadside Torsion Spring 2-3/16" ID 27" Long

Torsion spring wire only
.177 wire size

K20-1075B-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1PH L3 L4 ***NLA*** Replaced by K20-1075B-2LP-H24

Standard 3/4HP 115V Logic 3 or L4 model T J HJ SD & H

TH827-24V

Erone 7-Day Timer 24V

24V AC/DC input voltage with battery back-up
One "NO" contact and one "NC" Contact
Up to 8 ON and OFF switches a day (56 per week)
Easy to read LCD Display
Manual override button
Ideal to keep a gate open during the day

.......more details

Programming Instructions Instructions de programmation

65853

Marantec Programming Wire - Old ML to New M3

Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.

MU22-2WIRE-LH-B

Miller Edge MU22 2-Wire Left Hand Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

MU22-2WIRE-RH-Y

Miller Edge MU22 2-Wire Right Hand Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

1005-1-1/2-8'

Aluminum Bottom Retainer U-Shaped 8' Long

For door thickness 1-1/2"

4A1008

LiftMaster Master Link #48 Kit (2 sets)

For #48 chain
Kit (2 sets)

22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

Steel construction Zinc plated
Cross ref: Eberhard 4300

41A6118

LiftMaster Travel Module (3800) *** No longer available To extent of inventory

Fits model 3800 confirmed with LiftMaster Tech support.

Programming Instructions

305-153613

LiftMaster Idler Sprocket Assembly (K305-153613)

Fits SL595

CARX-20

EMX Accessory Access Card 5404-1

3.4" x 1.2" x 0.1" (ISO standard size)
Reinforced for long life
Mifare 26 bit Wiegand Format
Durable access card for use on the CR-2000 and PRX-320
Easy and convenient use - just swipe in front of sensor
Secure and can be disabled individually at any time

.......more details

CR-2000

EMX Keypad/Card Reader Waterproof 5401-1

Back-lit keys for nighttime operation
2000 users (card or passcode)
Rugged waterproof design and vandal resistant
9-24 VDC
Tamper alarm
Door call button

.......more details

Instruction Manual Spec Sheet

08-11013

LiftMaster Bevel Gear 3/4" ID

Fits the LiftMaster GH operator

SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

Actual length is approx. 9'-1"

104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

Compatible with Allstar and MVP receivers
4-digit access code
Backlit keys
Operate LED
Power: 9-volt battery
Codes: 19683

.......more details

Programming Instructions

K29-32410

LiftMaster Alarm Kit for SL575/585/595

Kit includes Alarm Spacer and Faston

Installation Manual

302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
The 300 MHz frequency is compatible with standard Multi-Code transmitters
The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
Operates on 12-24 volts AC or DC power
Two channels
Whip antenna

.......more details

Programming Instructions

15-50B18LGH

Sprocket 18 Teeth 1" Bore 1/4" Keyway

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

MI00007

Micanan Front Idler Assembly for PRO-APT/T

For model PRO-APT / T
3/4" x 5.79" LG

10-10355

LiftMaster Solenoid Link

.225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

C-200-INSTALLED

Cones 2" Factory Installed (Pair)

For do-it-yourself installation use part no. SF200

.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.283-134-L

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-134-R

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.250-134-L

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.207-134-L

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.218-134-R

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

NX21

Allen Bradley 24V Reversing Contactor

Allen Bradley no. 104-C16KJH22-X6
Cat no. 100-C16*10

7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

I-Beam Chain Drive Rail for model 3595

K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual

ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME123-BLK-LH

Miller Edge Black Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME123-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details