Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
PRO-J-10023-U-LH

Micanan 1HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
MG-00054

Micanan Plastic Spacer for Boards (Medium Length 0.768)

MK-00160

Micanan 12-Pole Terminal Strip

MK-00047

Micanan Overload Reset 1-Phase 25 Amps

MK-00139

Micanan Overload Reset 3-Phase 0.8 - 1.2 Amps

MK-00046

Micanan Overload Reset 1-Phase 20 Amps

MK-00346

Micanan Relay 12 VAC 8-Pin Plug-In

MK-00223

Micanan Transformer 460V-110V-100VA

MK-00222

Micanan Transformer 460V-24V-100VA

MK-00024

Micanan Single Limit Switch AT

MP-00075

Micanan Heavy Duty Front Idler (Trolley End Bracket) #410

MK-00477

Micanan Timer Plug-In Type 0-10min 120V

MV-00239

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 1 Flush Mount

MV-00017

Micanan Key Switch O/C/S Btn Tamper Proof Nema 1 Flush Mount

MV-00016

Micanan Key Switch O/C Tamper Proof Nema 1 Flush Mount

MV-00304

Micanan Wireless Key Switch

MV-00005

Micanan PBC-3 3-btn O/C/S Nema-1 Pushbutton Control Station Flush Mount

  • Flush mount
PRO-H-5083U-RH

Micanan 1/2HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
MP00226

Micanan Track and #41 Waterproof Chain for 10' h Door

  • For 3/4 & 1 HP Micanan trolley operators
PRO-J-10083-U-LH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-10021-U-LH

Micanan 1HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
.421-6-L

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.421-514-R

Cut-to-Length Torsion Spring .421 x 5-1/4" Right Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.437-334-L

Cut-to-Length Torsion Spring .437 x 3-3/4" Left Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.319-514-L

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.375-334-R

Cut-to-Length Torsion Spring .375 x3-3/4" Right Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
PRO-J-7581-U-RH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-J-7581-U-LH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-5021-U-RH

Micanan 1/2HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-LJ-5021-U-LH

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Left Hand

  • On-Board receiver holds up to 20 transmitters
PRO-GT-15043-U

Micanan 1-1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
PRO-GT-7553-U

Micanan 3/4HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7583-U

Micanan 3/4HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5043-U

Micanan 1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5023-U

Micanan 1/2HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
ALUM-5P6

Aluminum 24" x 100' Spool Iron Ore / Minerai de Fer # 5P6

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P6
  • Reverse side is #431 Bright White
Colour chart
PRO-APTB-7521-U

Micanan 3/4HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
PRO-APTB-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
PRO-APT-7553-U

Micanan 3/4HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-7523-U

Micanan 3/4HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-10043-U

Micanan 1 HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-10023-U

Micanan 1 HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-5083-U

Micanan 1/2HP 208V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-7511-U

Micanan 3/4HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
60-7233

Wheel Chock Tie Back Chain Custom Lengths 3/16" Galvanized Sold by the Foot *** No Longer Available. See 60-7238 as possible replacement

  • Tie back chain only - Sold by the Foot
  • 3/16" Galvanized
88-8

Wheel Chock 88-8 Laminated Rubber Galv. Steel Sides

  • Fabric Reinforced Tire Rubber
  • Galvanized Steel Sides
  • Size: 8" wide x 8" long x 8" high
CMH-94

Wheel Chock CMH-94 Rubber with Integral Handle

  • One Piece Solid Rubber
  • Integral Handle
  • Long Lasting 80 Durometer rubber
  • Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high
60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Made from Cast Ductile Iron for Impressive Strength
  • Painted Blue for good Visibility
  • Completely Reversible for Simple Use
  • Size: 8" wide x 12" long x 9" high
60-7248-IC10

Wheel Chock Safety Pkg incl'd: yellow formed steel chock w "tooth" like bottom wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) IC-10 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • "Tooth" Like Bottom Grips Icy/Slippery Ground Surface
  • Powder Coated Yellow for High Visibility
  • Formed Steel
  • Size: 8" wide x10-1/2" long x 9-1/4" high
42GRR-9001

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

  • nput: 20-40VAC 10-55VDC 4VA
MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

LT100HLTB3815

Telco Thru Beam Transmitter with LED M12 Hi-Power 15M Cable

  • Sensor Light Transmitter with LED
  • M12 High Power 15M Cable
MS-00002

Micanan Trolley Track Set 12 Ga. 9'6" (for 7' h. door) Includes 2 Angles Only

  • Set includes 2 tracks only
  • Chain NOT included
K23-30716

LiftMaster Stop Switch 120VAC 6A

  • Same as 20-30716
PRO-APTB-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
CAPXL

LiftMaster Connected Access Portal High Capacity

  • Connected Access Portal High Capacity Cloud-based access control for residential communities.
  • Capacities: 4 Controlled Gates/Doors
  • Wireless Link for up to 8 LiftMaster® Operators
  • 4 to 8 Digit Entry Codes
  • 4 to 6 Digit Directory Codes
  • 50000 Local Resident Capacity
    • .......more details
RATCHET_BAR

Ratchet Bar for Holdown Assembly 8-8786 ** Quote Only

HRB-11

High Riser Bracket for 7" Above Dock or Higher 11"

  • High Riser 11" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
HRB-7

High Riser Bracket for 7" Above Dock or Higher 7"

  • High Riser 7" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-5

Standard Riser Bracket 5" Above Dock

  • Standard 5" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
E/1929/031

Automatic Systems Installation Plate Ass'y BL229

  • Used on the BL229 gate op.
E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

MOUNTSHAFT010A

Manaras Hoist Shaft Kit for MJH (after-1998)

  • For MJH MJHW/C/X built from 1999-2003
748

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#2PT) 1000/Box

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #2 point = shorter cutting edge (more thread)
LB1210-14

Laminated Bumper Standard Black 10" x 14" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1010-24

Laminated Bumper Standard Black 10" x 24" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB810-36

Laminated Bumper Standard Black 10" x 36" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB436-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB406-24SF

Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
10-10190

LiftMaster Brake Release Lever

  • Replacement lever for model SD
LB412-24SF

Steel Faced Laminated Bumper Black 12" x 24" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB636-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
LLB620-22SF

Steel Faced Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
    • .......more details
LB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-24

Laminated Bumper Standard Black 12" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-18

Laminated Bumper Standard Black 12" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-12

Laminated Bumper Standard Black 12" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LLB420-22

Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • This model has angles on both sides
    • .......more details
LVB430-11

Laminated Bumper Black 4" Projection Vertical Installation 30" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
8-11-1

Strut Clip Sold individually

  • Hole diameter: 0.260"
PRO-PL-INV-200-23

Micanan Wall Mounted Control Panel with Variable Frequency Drive Mod. 2HP 230V 3 PH

  • Additional charges apply for adding PBS on cover or if panel is not ordered with an operator
Z9211-2

Stationary Cone Tool 2-5/8"

  • Easily dislodges the cone from the torsion spring
MM00149

Micanan GHC Frame Support U-Bracket MSI0161 (for 2 3HP)

MG00018

Micanan Lock Washer 3/8"

  • PRO-GHC operator parts
  • 10 required per operator
MM-00126

Micanan Wall Mounting Plate (Reducer 80/100)

MOD027B

Manaras Auxiliary Output Module Modification

MM-00035

Micanan Chain Keeper

25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

  • Double - Loop end for strength
  • 25" long 42" stretch 260 lb load
  • Sold individually
  • Rated for 10000 cycles
108135.0002

Overhead Poly Type V- Belt for Old RG 32" *** by quote only

T-50-H

FL-Heddolf 1-btn Transmitter ID220-1KA-311 MHz ** Discontinued

  • Keystone-Heddolf single button FL T-50 compatible remote
  • 9 dip switch format
  • 9V battery and metal clip included
MH00006

Micanan Shaft Collar 3/8" I.D

BOARD060R

Manaras Replacement Circuit Board (No Monitoring)

  • Control board for BOARD065