Devanco Canada

CP-SW-HOIST

Lynx Interlock Switch

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

CP-SW-TD6A

Lynx Switch Light Delay

For the old Lynx 455 operators

CP-TIMER-CN

Lynx Relay (Dual) Timer Hard Wired

CP-TRF-110-24-20VA

Lynx Transformer 110/24V-20VA

Will work with old 455 Automatic Doorman opener

CP100C

Coupler Specialty Coated 1" Bore

Coated with 1000 plus hr salt spray rated finish
1" Bore with 1/4" keyway
Malleable iron for high strength and resistance to shock loading
Coupler halves separates and is adjustable
4-(3/8"-16 x 1" square head set screws installed
Rust inhibitor coating

.......more details

CP1L-L14DR-A

Programmable Omron Automate 14 E/S ** Price by Quote Only

Works on BCSI-HV 240 single phase

CP35

Roller Chain Puller 35-60

Allows chain to be pulled together for attachment of the master link
For 35 thru 60 chain

CPE

Erone Proximity Card Standard

Hexadecimal number printed on each badge
8mm thick

CPS

LiftMaster Commercial Protector System Eyes

Universal commercial photo-eye kit for indoor use
Interface box allows CPS to work with all operators
24 volt AC/DC supply voltage
Mounting hardware included
Sensing distance of 30 feet
Receiving Eye - A: 001D6857-1 Sending Eye - A: 001D6857-2

.......more details

Installation Manual

CPS-3

LiftMaster Option Card with CPS-L Eyes

For applications requiring two sets of photoeyes ( CPS-III)

Installation Manual

CPS-EI

LiftMaster 4-Wire Sensing Edge Interface

Designed to provide advanced safety and security to the door system in commercial environments.
This device is intended for use with LiftMaster Logic Commercial door operators and compatible with 4-wire monitored sensing edges.
This is a stand-alone reversing system and is not intend to be used in conjunction with any additional entrapment protection devices.
A junction box not provided is recommend to protect exposed wiring.
Compatible with Logic 5.0 Logic 4.0 Medium Duty Operators and Fire Door Operators.

CPS-MEI

LiftMaster Electric Edge Card **to extent of inventory

The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
Same as Miller Edge SM-102

CPS-N4

LiftMaster Nema 4 Commercial Protector System Photo-Eyes with Interface box

Commercial Through Beam Photo Eyes includes:
50-15514 I/R Emmitter
50-15515 I/R Detector
77-16011 Hardware Kit N4-CPS
001C4629 CPI Housing Assembly
Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998

.......more details

Installation Manual Manuel d'installation

CPS-OPEN4

LiftMaster Monitored Dual-Sided Photo Eyes

For use with sectional or rolling doors.
May be installed in areas exposed to rain or moisture
Rubberized for more durability
Will work on LiftMaster residential operators

Installation Manual Manuel d'Installation Sell Sheet

CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
Polarized photo-eye design for a safe retro-reflective photo-eye system
Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
Range up to 30 ft - indoor use only
24VAC operation
Color: Yellow

.......more details

Installation Manual