Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
MOD034

Manaras Monitored Photocell Upgrade N1 to N4

  • Ideal for industrial environments submersible and impact resistant.
  • Flexible design withstands and realigns after mechanical impact.
  • Max. range 45ft.
  • Incl. photoeyes 3ft of conductor wire and mounting hardware.
  • Applies to all operator models with electronic control "M" types.
MOD035

Manaras Monitored Photocell Upgrade N1 to N4X

  • Ideal for industrial environments submersible and impact resistant.
  • Flexible design withstands and realigns after mechanical impact.
  • Max. range 45ft.
  • Incl. photoeyes 3ft of conductor wire and mounting hardware.
  • Applies to all operator models with electronic control "M" types.
MOD050

Manaras Friction Clutch Mod. #50 Chain Gear Head Operators

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to OGH and MGH operators
    • .......more details
MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to RGH ops
    • .......more details
MOD060-12FT-MAX

Manaras Auxiliary Trolley #41 Chain Modification Only

  • Provides drawbar operation of a standard lift door with the use of a jackshaft operator
  • Includes tracks for doors up to 12' high. Additional fee for over 12'
  • Maximum door width 22'
MOD060-14FT

Manaras Auxiliary Trolley #41 Chain Modification Only

  • Provides drawbar operation of a standard lift door with the use of a jackshaft operator
  • Includes tracks for doors up to 12' high. Additional fee for over 12'
  • Maximum door width 22'
MOD064C

Manaras Trolley Hoist Kit #410 Chain for OTH

  • Modification when purchased with an operator
  • #410 CHAIN WITH FRONTIDLER ASSY
  • CHAIN HOIST ASSY
  • HOIST KIT FOR TROLLEY HOIST CHAIN
Drawing
MOD065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

  • Chain hoist for manual hand operation of standard lift doors equipped with trolley operators.
  • The 1" cross-header shaft (12' long) drives the front idler of the drawbar
  • For use with operators with #41 chain
  • When applicable it incorporates an electric cut-out and brake release cable
  • Hand chain for 14' high door is standard
  • Hoist assembly width is only 8.5"
    • .......more details
MOD074

Manaras Hand Crank Modification

  • For manual operation with a hand crank instead of a chain hoist.
  • Hand crank hook and eye outlet is supplied.
  • A 5/8" rod or pipe (SHAFT002) is required but not supplied
  • SHAFT002 should be ordered separately and desired cut-to length specified at time of order.
  • This modification is also available for in the field upgrade - see MODKIT074
  • This modification applies to OGH and MGH operators
    • .......more details
MOD076

Manaras Motor 208V/1Ph 60 Hz Modification No extra charge

  • The standard 240V/1Ph op. is coverted to 208V/1Ph incoming power supply
MOD081

Manaras Damp Environment Oil and Dust Tight Modification Supplied with Monitored N4 Eyes

  • For applications where dust water spray oil leaks or any other type of condensation is present.
  • Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
  • If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well
MOD082

Manaras Hazardous Location Modification

  • For electromechanical control only
  • For indoor use in hazardous locations
MOD112

Manaras Limit Shaft Speed-Up #48/#410 Chain

  • Sprockets and chain are replaced in order to accelerate the ops limit shaft to increase the accuracy of the limit system for sectional doors 8ft H or less
  • For field upgrades use MODKIT112
MOD114A

Manaras Synthetic Oil Upgrade Only

  • This Upgrade Mod. is only available when purchaed with a compatible operator
  • Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances
MOD114C

Manaras Synthetic Oil Upgrade for MGH up to 1.5HP

  • This Upgrade Mod. is only available when purchaed with a compatible operator
  • Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances
MOD117

Manaras Special Application Chip Modification

MOD130

Manaras Cogged V-Belt Upgrade

  • The standard v-belt is replaced by a cogged v-belt for added durability
  • Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
  • This is available only as an upgrade with the purchase of a commercial op.
MOD163G

Manaras Heater in Reducer & C-Box 575V-3P 24VAC 15W + 30W

  • This modification is an option when ordering a commercial operator
MODKIT003

Manaras Time Delay Kit 1.5 Sec For Contactor Models

  • MODKIT003 for field upgrades
  • Order MOD003 when ordered in conjunction with a commercial operator
MODKIT012B

Manaras Non-Reset Cycle Counter Kit - Boards

  • Field install kit
  • When activated counts one complete cycle of the door
  • Hardwired