Devanco Canada

MW00024

MWC-32

MWR12

��The MWR12 receiver is designed to receive information from the transmitter and relay it to the motor to stop or reverse motion if the edge comes into contact with an obstruction.
Power requirements: 10 to 40 VDC 10-30 VAC
Output: dry relay contact N/O and N/C 1A @60VAC
Operating temperature: -40C to 60C
Maximum operating distance: 100ft
Electrical configuration: optional N/O or N/C

Installation Manual Sell Sheet

MWR22B

MWRTA12B

For 2-wire edges
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

MWT12

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

MWT12B

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: 70 milliseconds

Installation Instructions MWT12B Spec Sheet MWT12B FAQ MWT12B

MWTA12

The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

Installation Manual Sell Sheet

MWTA12B

The transmitter comes standard with a NEMA 4 weather-proof enclosure
Compact design that allow for easy troubleshooting.
The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
Power Source: (2) 1.5 volts AA lithium batteries
Input: 2-wire N.O. sensing edge

Installation manual Spec sheet

MX-00016

MX-00033

Kit includes: MM-00031 wall L-bracket (1) MM-00032 trolley arm 105 degrees (1) MM-00033 trolley extension arm (1) MM-00034 trolley arm sliding bracket (1) MO-00004 trolley arm compression spring (1) and MR-00009 red rope c/w handle and warning label (2)