Devanco Canada - Get The Right Garage Door Opener‎ and Parts

104255

Allstar Clip only for 8833TC

Clip only

36764A

Genie Chain and Belt Pulley (#39591A)

Works on Genie IntelliG 1000 & 1200 Garage Door Openers
Both for Chain and Belt Openers
Front Idler Pulley for Genie 4024
New part number #39591A

MD-00034

Micanan Connecting Link #410

PS241F

Adjustable Regulated Power Supply with Optional BBU 6-24VDC 1AMP

3 preset voltages: 6 12 and 24 VDC
Full adjustment from 2 to 24 VDC if required
Requires AC transformer for input power (minimum 14 VAC for 12 VDC output 26 VAC for 24 VDC output cannot be connected directly to 120 VAC)
Maximum 1 amp. Output at 70 deg. F and free air
Ripple: Minimum load: 0.007vrms Half load: 0.028vrms Maximum load: 0.057vrms
Regulation: 97.5%

.......more details

Wiring Diagram Diagramme de raccordement Spec Sheet Spécifications

ST-PROFILE

Soft Touch Profile Sold per Foot

Yellow air-wave edge
Fits most standard 1-5/8" retainers
300 feet in a roll

90_9210MO

LiftMaster Auxiliary Limit Switch Mod M62 Open Factory Installed

Provides a limit switch for use by others to control auxiliary devices such as lights heaters dock levelers or other equipment.
The switch can be used to turn on or off such equipment when the door is fully opened or fully closed.
When ordering specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure.
A maximum of 2 switches per operator can be supplied.
Each switch is SPDT (form C) and is rated 10 amps at 125/250 VAC
Wire leads are provided on field install kits

.......more details

ME111-R

Miller Edge Black Right Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz ** Discontinued

UL325
Works on the new Lynx operators
For 3 doors

Programming Instructions Compatibility chart

CP-LX720

Lynx 3-btn O/C/S Transmitter 372 MHz for Commercial Op. with UL325 Board

UL325
Works on the new Lynx commercial operators
Open Close Stop transmitter
Not compatible with the 372MHz residential operators.

Programming instructions Compatibility chart

25-60503

Truck Door T-Style Ramp Handles Curbside (Right)

Black plastic construction
Cross ref.: 39504-2

25-01434

Truck Door Stainless Cables 110" 1/4 nylon eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Nylon eye ends are used 1/4" and 7/16" eye cables
Cross Ref: W4020-1

K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

Service kit to connect new LED arm to existing barrier gate
Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply

1104-7'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

PBS3-BLACK

Replacement Button Only - Black. ***Discontinued

Replacement button for 02-403P

PBS3-GREEN

Replacement Button Only - Green

Replacement button for 02-403P

H101L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Right Hand W/Brake ***No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

MO00003

Micanan Compression Spring for PRO-H/HB

0.80 ID x 0.092G x 1.80 Long

11-10705

LiftMaster Output Shaft MH

T116

Manaras Trolley Track 16ft for 3/4HP & All APT models up-charge *Actual length 222"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

CONTACTOR008

Reversing Contactor Struthers Dunn 115VAC

14-1004

PVC Roll 8" x .080 Standard Clear Smooth 300' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

22 gauge
Max size: 18'4" max std. width 20'4" max std. height
Slate type: Curved
Finishes: Gray White Tan Brown or Galvanized
RAL Powder coat option in 188 colors

LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

For use with D-TEK detectors (most commonly used)
Hourglass shaped

HSC-1000

Hand Swager 1/4" & 5/16"

Swages 1/4" and 5/16"
Made in Japan

111883.0001

Overhead Logic Board for RMX

Replacement circuit board kit for the Overhead Door RMX commercial operator.
Replacement circuit board for the Overhead Door RMX commercial operator. UL 325 2010 compliant.
This circuit board replaces part #110955.0001

MA024

LiftMaster Round Aluminum Arm Yellow/Black Stripes 12ft ***NLA Repl. by MA024RDOT

For use on Mega-Arm gate operator
Replacement part MA024RDOT

1003-3"-PER-FT

Bottom U-Rubber 3" Black Sold per Foot

37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
Purple

PEDALU42-HOOD

Aluminum Hood Only No Post for PEDALU42

Hood only No post
High quality aluminum
Boitier pied estau seulement en aluminum

Shop drawing

GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

1104-8FT-CLAYST

Residential Side & Top PVC Weather-Strip with cap 8' Long - Claystone

Claystone rigid vinyl retainer with claystone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

27-48-260

Extension Spring 8' Door - 260 lbs Brown

Single - Loop
27" long 48" stretch 260 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-200

Extension Spring 8' Door - 200 lbs Tan - Sold Each

Single - Loop
27" long 48" stretch 200 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H753L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Right Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

OEB-1

Super Sneaky Operator Extension Bracket

Improves installation safety
Extends operator rail travel length. Use a 7′ rail for 7’6" – 8′ tall doors
Saves extra 2" of headroom required by draw bar type operators
Pulls door clear of opening
Eliminates garage door overhang
Greatly increased installation ease & safety

.......more details

2528.096

Whiting Dual-Spring Shaft 96" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes pre-drilled
Cross Reference: For Whiting # 2376 balancer

BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

Universal spring anchor brackets - Residential/Commercial
Centerline adjustment: 3-5/16" to 6-3/4"
Bright zinc plated 8 gauge steel
No bearing
Bearing R5110 sold separately

RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles

PRO-GH-7553U-LH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

MW-00021

Micanan Splash Proof Cover Fully Assembled

Splash proof cover for models: PRO-H J HHD GH and GHC
Same as MP-00204

BK310

Jamb bracket J-10 #10 12 gauge

Sold by the piece
Height 4.50" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

41C5141-2

LiftMaster Trolley Assembly Belt Drive

For retail model
For belt drive

41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

Fits square trolley rail only
Same as 183A163

K72-12563

LiftMaster Clutch Shaft Kit for Model H Prior to 2005

MGR20-Y-2U-04

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 4ft Long

Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
3-sided activation allows for immediate stopping or reversing of motion
Contours to round or square posts.
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 6-8 PSI

.......more details

Installation Manual Sell Sheet

T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

16-5L300

LiftMaster Cogged Vbelt 5L 30"

T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

CLUTCHPAD005

Manaras Clutch Pad 5/8" ID 4" OD ( replaces CLUTCHPAD001 )

Made from commercial grey vulcanized fiber

PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

Programming Instructions Instructions de programmation Sell Sheet

SETMCIC9V

Erone 1-Channel Wireless Module 433 MHz

You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V) and black (0V) wire into power supply
Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
Works with any 433 MHz Erone receiver

Wireless System Chart

27150A

Genie Chain Bullet

Compatible with: Genie – PMX60 PMX65 PMX80 PMX85 PMX300-IC/A & B IC250 IC250B PMX500-IC/A & IC/B ALC SERIES RCD SERIES
Overhead Door – 496 496CD (/A&B ) 696 (/A&B) 777 777CD
PASSPORT 286-386 286CD-386CD
Connects the two chain ends and also is the piece that the carriage engages

20462R

Genie Carriage Release Assembly Belt Drive *** No Longer Available

Carriage slide sold seperately- part number 27175B
This carriage is used for Genie and Overhead chain and belt channel rails

TCR-1

Tri-Code Receiver Single Channel ** DISCONTINUED

Single channel receiver compatible with Linear Delta Multi-Code and Stanley radios
Three position direct connect tabs for commercial and residential garage door openers

Programming Instructions

797

Fasteners Clevis Pin 5/16" x 1" 100/Bag

LA500DC

LiftMaster Primary 24VDC Actuator Arm for Single Gate Applications New Model

Replacement actuator arm for single gate applications

Installation Manual Manuel d'installation Sell Sheet Brochure

SSZP10-6

Solid Shaft 1" Keyed Zinc Plated 10'-6"

MT22-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

Chain pack only

41C168

LiftMaster Transformer

For model 8500
120V / 150 VA
24VDC output voltage
Also known as 41C0168 041C0168

27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

2705.177_270

Whiting Curbside Torsion Spring 2-3/16" ID 27" Long

Torsion spring wire only
.177 wire size

K20-1075B-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1PH L3 L4 ***NLA*** Replaced by K20-1075B-2LP-H24

Standard 3/4HP 115V Logic 3 or L4 model T J HJ SD & H

UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

Grey cast iron painted.
Comes with 2x set-screws
Football style 2 bolt

EL25S

LiftMaster Telephone Entry System Silver

Capable of accepting up to 2000 codes
4 assignable and programmable built-in relays
Mounting versatility and available in 3 colors: Gray Nickel or Silver

Installation Manual Sell Sheet

PED4272

Pedestal Post 42" & 72" Dual Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look

75424

Marantec Universal Receiver / Remote Kit 315 MHz

Universal receiver kit includes one plug-in radio receiver and one M3-2312 remote control transmitter
Universal receiver plugs directly into the wall outlet
Same as part # 73870
Made in Germany

Installation Instructions Programming Instructions

SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

Actual length is approx. 7'-1"

02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

Die-cast metal enclosure
START may be used as OPEN with all LiftMaster operators.
May be used as OPEN and CLOSE on all operators with type B2 control wiring

DD-KIT

Linear Double Delta Radio Kit (2X DT & 1X DR)

Kit includes two DT remotes and one DR receiver
Same as: DNP00006
Operates on 24 VAC power
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

Installation Manual

1005-1-3/4-10

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

27-20004

Truck Door Dual-Spring Shaft 93" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-134-L

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

RELAY022

Manaras Socket Base for TIMER031

8 pin base

2807.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Curbside

Replacement torsion spring with cones for Whiting Door Serial # 138631
Specs: .139 x 2-3/16" x 14" Long
Curbside
For Roadside order part #2806.139*140

.437_3-3/4"-LH

Torsion Spring .437 x 3-3/4" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 3-3/4"
Length: 12 ft

.295_2-5/8"-LH

Torsion Spring .295 x 2-5/8" x 12ft LH Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft

.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

Gear and sprocket assembly for belt drive units after 2002.
Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.

Installation Manual Manuel d'Installation

MK00488

Micanan Electronic Circuit Board Monitored

Replacement board for PRO-LH (50-11)
Board has terminals P1 & P2
Up to 20 transmitters can be programmed

Instructions Manual

RA-LYNX-RCVR

Lynx External Receiver

Add to most operator systems
Use with either residential or commercial applications
Unlimited transmitter capacity

Programming instructions Compatibility chart

H14GHALF

Half Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 1-5/8" wide with slotted holes

VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

Used on MTH MTBH MSL models
Type B
Inside length 32 inches

DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

Replaces DRUM004
Brake drum with edges for current braking systems (2000 - current)
Used on all Manaras operators except Gear Head models.
Use with BRAKEPART019 (old part BRAKEPART017)

SPREADER001

Chain Tensioner for 1" shafts

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing