Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1106-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

  • Aluminum retainer with black dual fin vinyl
1102-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1001-16-GREY

Commercial Side & Top Weather-Strip 16' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

  • Double - Loop
  • 32" long 48" stretch 170 lb load
  • Springs sold individually
  • Rated for 10000 cycles
Spec Sheet
32-48-140

Extension Spring 8' Door - 140 lbs Blue ** Replaced by 27-48-140

  • Double - Loop
  • 32" long 48" stretch 140 lb load
  • Springs sold individually
Spec Sheet
32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

  • Double - Loop
  • 32" long 48" stretch 80 lb load
  • Springs sold individually
25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

  • Double - Loop
  • 25" long 42" stretch 270 lb load
  • Sold individually
Spec Sheet
25-42-130

Extension Spring 7' Door - 130 lbs Yellow

  • Double - Loop
  • 25" long 42" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White
27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 98" Spring Length: 60" Wire Size: .243
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
  • Heavy-duty cast aluminum cable drums hold up to 130" of cable
    • .......more details
27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2548
25E10220

Truck Door Top Closure Plate & Slide Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Included: Base plate slide bolt & flanged nut
  • Improved heavy-duty reinforced slide
  • Adjusts top panel for firm seal
  • Cross Reference: W #6944
25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

  • Steel construction Plain finish
  • Contoured for proper lock engagement
  • Cross Reference: W #2804
Z9997

Hand Chain 25' for Manual Chain Hoists

  • Not SAE rated.
  • Designed for approx. 35 lbs
Z9404

Coupler 1-1/4" Bore Adjustable

  • Malleable iron for strength
  • With 2 jam nuts
  • 1-1/4" Bore with 1/4" keyway
DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

  • 28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads. -
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 28'-1".
  • Rated Lift per Drum: 1100 lbs.
  • Max. Cable Diameter: 1/4".
    • .......more details
DM28VL

Cable Drum Vertical Lift 28' 1350-28 1" Bore Pair

  • 28' Vertical Lift aluminum die cast alloy. •3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 28'-1".
  • Rated Lift per Drum: 1100 lbs.
  • Max. Cable Diameter: 1/4".
  • Mounting: 1" (or 1-1/4" must specify when ordering) solid shaft with 1/4" keyway.
    • .......more details
H11G12

Hinge #12 x 11 gauge

  • 11 gauge # 12 hinge - 1.00 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G07

Hinge #7 x 11 gauge

  • 11 gauge # 7 hinge - 0.83 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G06

Hinge #6 x 11 gauge

  • 11 gauge #6 hinge - 0.79 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G02

Hinge #2 x 11 gauge

  • 11 gauge # 2 hinge - 0.69 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
H11G03

Hinge #3 x 11 gauge

  • 11 gauge # 3 hinge - 0.72 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G01

Hinge #1 x 11 gauge

  • 11 gauge hinge #1 - 0.61 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
  • Item code # 224185
Z9002

Pusher Spring - 15" Sold as a Pair

  • Pusher spring 15" long with 6" travel. Sold as a pair
RN1327

Roller 2" Nylon 7" stem 13 ball White Sold per Roller

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 6.62" Overall Length: 7.59"
  • Box qty: 100 Box weight: 44.8 lbs (2-7-13 White Nylon)
RS1034

Roller 3" Steel 4" stem 10 ball

  • Steel Roller Wheel diameter: 3"
  • Working length: 3.38"
  • Overall length: 4.75"
  • Box qty: 50 Box weight: 35.8 lbs (3-4-10 Steel)
D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

  • Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
  • Works with most LiftMaster gate operators
  • Won't work with Elite Series Mega Arm Slide & Swing
  • Simply plug it into the harness already in the operator
  • Loop lead-in wires connect to operator terminal strip
  • Gold plated control contacts
    • .......more details
Installation ManualSell Sheet
4X10SC50

Devanco Loop 4' x 10' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
PREM-SEL-XL-R16

Garex Ready to Install Door Special Order Premium Select XL R16

  • R16 Insulation - Long Panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
41C190

LiftMaster Transformer/Harness 120V/80VA/18V

ALUM-508

Aluminum 24" x 100' Spool Sandalwood / Sable # 508

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 508
  • Reverse side is #431 Bright White
Colour chart
112357.0004

Overhead Logic Board for RSX 575V 3PH

  • Fits OPRSXH75015BR
1007-1-5/8-10

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 10'1"

  • For door thickness of 1-5/8" to 1-3/4"
4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
TM1-PLUS

Programmable Timer 1 Sec - 4 Hrs 12/24V DC

  • 6 modes of operation : Delay on operate Delay on release Latching #1 Latching #2 Pulsing #1 Pulsing #2
  • Adjustable from 1 second to 4 hours with programmable dip switches LED status indicates when timer function is active
  • Microprocessor based / controlled clock for accuracy of 2%
  • Operates on a power supply of 12vdc or 24vdc
  • SPDT relay output : 5 amp 24vdc contacts
E/1929/070

Automatic Systems Spare Arm 14'-9" (BL229)

  • Used on the BL229 gate op.
K15-50B18QGX

Output Sprocket for SL595 and SL595UL

  • This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
MICANAN-H/CHAIN

Micanan Charge for Hand Chain on Doors Over 16'

  • Up-charge only
MX00140-NEW

Micanan Brake Assembly for PRO-TB/APTB NO Solenoid - New Model (SBR-N1-00-TTBPAPT)

.295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
29138

Doorlec Transformer 208V pr 120V sec 50VA

  • 208V prImary 120V secondary 50VA
RS1037

Roller 3" Steel 7" stem 10 ball

  • Steel Roller Wheel diameter: 3"
  • Working length: 6.5"
  • Overall length: 7.75"
  • Box qty: 60 Box weight: 34.2 lbs (3-7-10 Steel)
10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

  • Transmitter offering means of activation of automatic doors with extended hold feature.
  • Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
  • Operating temperature: -10 to 55C
  • Controls one 10RD433 receiver.
.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
BT501L5

LiftMaster 1/2 HP 115/230V 1p Commercial Trolley Operator with a Brake Logic 5 ***No Longer Available

  • Low profile trolley operator with brake installed
  • Comes with #48 roller chain
Installation manualManuel d'installationSell sheetBrochure
12562

Doorlec Lower Brake Shoe - Left ** No longer available

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 1 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
  • Replaced by RADIO-RE900A
    • .......more details
Programming Instructions - ECBProgramming Instructions - CONT
4004-16FT

Aluminum Retainer only for Heavy Brush 16' Long 45 degree

  • For angle application (45 degree)
  • For use with Heavy Brush
600BH

6" Heavy Brush Insert 8ft Long

  • Polypropylene bristles
PRO-HB-7523U-RH

Micanan 3/4HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
426-0913

Richards-Wilcox Galvanized End Cap T175-24" LH

SEF2420

Erone Adjustable Infrared Photocell 20M (65ft)

  • Adjustable lens 180° right to left and 40° Top-Bottom
  • Range 20M (66ft) in all conditions
  • Adjustable Sensitivity
  • Power supply 12/24 Vac/dc
  • Operating temperature -20/+55 °C
  • Dimension: 90 x 60 x 60mm (3.5 x 2.4 x 2.4 inches)
    • .......more details
Wireless System Chart
VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
Installation ManualSell Sheet
4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
03-8024-K

Reversing Contactor 3-Pole

  • Reversing contactor with 24 VOLT coil
  • Dimensions: 3.5" long x 2.25" wide x 2.25" high
  • Telemecanique part # LC 2K09 107B7
25E10050

Truck Door Center Hinge Black E-coat finish for Todco Roll-Up Doors

  • Steel construction Black E-coat finish
PRO-GHC-10021U-R

Micanan 1 HP 230V 1P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
Installation manualSpecification sheet
NIR

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5200-2)

  • Watertight packaging
  • Detection range: 30 feet
  • 6 foot cord
  • Reflector Bracket and mounting hardware Included
  • 2 LED indicators
  • Sensitivity adjustment
    • .......more details
Installation ManualSell Sheet
LJH-383-1/2-RH

Doorlec 1/2 HP 208V 3PH Jackshaft Operator Right Hand

  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
  • Rotary type limit switches readily adjustable in both directions
    • .......more details
Technical information
K15-41B17LKGH

LiftMaster Q070 Output Sprocket

  • Sprocket for #41 chain
1001-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

  • Aluminum retainer with black dual-fin vinyl
71-6532448

LiftMaster Heater Kit Mod. 230V Field Install

  • Compatible with LiftMaster® Models SL585GL and SL595GL Slide Gate Operators
25-01575

Truck Door Beverage Body Roll-Up Door Cable

  • Includes one (1) pair of cables
  • Zinc plated tear drop
  • Length: 110 inches
  • Cable eye: 1/4
  • Cable construction: 7 x 7 galvanized
2200-817

Linear Belleville Washer

BK312

Jamb bracket J-12 #12 12 gauge

  • Sold by the piece
  • Height 5.0" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot accepts 5/16" track bolts
25E10002

Truck Door End Hinge & Roller Cover Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Removable cover allows roller change without hinge removal
  • Cross Reference: W #1209 T #70162
  • Box quantity: 50
50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

PRO-GT-7543-U

Micanan 3/4HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

12-10029

LiftMaster Flanged Bearing 3/4" x 1-1/4" x 5/8"

41A5658

LiftMaster Gear & Sprocket Assembly for 2595 3595

  • Dual sprocket assembly for 3/4 HP chain drive operators.
  • Kit includes: Spring and thrust washer retaining ring bearing plate (2) roll pins dual drive and worm gear helical gear (with retainer) and grease.
  • For use Chamberlain Liftmaster chain drive models: 2595/3595/3595S
40-3505

LiftMaster Gate Warning Sign Plastic English

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
.319_6"-LH

Torsion Spring .319 x 6" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
MV-00300

Micanan Banner Intrinsically Safe Reflective Photocell ONLY (0-25ft. Range) *** Special Order POR

  • Model Q45AD9LV same as part # 37620
  • Range: 9 m; Input: 5-15V dc
  • Output: NAMUR
  • 2 m (6.5 ft) cable
  • Nema rating: NEMA 6P
  • DOES NOT include the bracket or the reflector. Use MV00482 for the kit
    • .......more details
829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

  • This innovative monitor lets you check and close the garage door or gate from any room in the house.
  • Green and Red LED lights indicate whether the garage door or gate is open or closed.
  • Volume controlled audible alert lets you know when the garage door or gate is being opened.
  • Able to monitor and close up to four garage doors or gates.
  • Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.
Programming InstructionsInstructions de programmation
A8833-PB

Allstar Replacement Square Push Button Only White Sold Individually

  • Square white button fits Allstar remotes # 8833 8833TC 8833T-OCS
LIMIT-KIT-BCSI

Limit Shaft Kit for BCSI Gate Operator ** Price by Quote Only

K32-10540

LiftMaster Gear Reducer 20:1 SL595

  • Same as 32-10540 32-55011 32-5501-1 G3255011
15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

DM11VL

Cable Drum Vertical Lift 11' 850-11 Pair

  • 11' Vertical Lift aluminum die cast alloy.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
  • Rated Lift per Drum: 425 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1" solid shaft with 1/4" keyway.
    • .......more details
OTBH-6433-M-N1

Manaras Trolley Operator 3/4HP 480V 3Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • Includes PHOTO-070
OGH-6232-M-N1-LH

Manaras 1/2 HP 208V 3Ph Gear Head Operator w/Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OHJ-6113-M-N1-LH

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph Monitored ECB w/N1 Photoeyes Left Hand

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
2GW-R

Rolling Steel 2" Stamped Alternate Windlock Right Hand

OPH-6212-M-N1-LH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
K76-34997

LiftMaster RPM Sensor Kit for L2 L3 L4 L5

  • For use with various LiftMaster® Commercial Door Operators
PRO-TBW-7523-U

Micanan 3/4HP 230V 3P Trolley Operator with Brake and Carwash Mod N4 Eyes

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
LB410-14SF/P1

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
MYQ-C43ACXW

LiftMaster MYQ Outdoor Wired Camera Weather resistant Motion detection & 2-way talk

  • 4-hour Proactive Security: Automatically locks & closes compatible doors and garages when it detects a person during pre-scheduled times ensuring your home is always secure. Video plan monitoring required. Complete Visibility: Capture every detail with 1080p full HD video featuring a 130º wide-angle lens and a 360º adjustable swivel lens for comprehensive coverage plus two-way communication for remote interaction. Vivid Night Vision: Enjoy color night vision for crystal-clear 24/7 image quality regardless of time of day. All Weather Reliability: Built to withstand the elements with reliable long-lasting performance rated to operate in temperatures from -4ºF to 122ºF. Quick and Easy Setup: Get set up in no time with integrated Bluetooth a fully adjustable mount and 25-foot power cord. Premium Smart Features: With smart detection features receive intelligent alerts that quickly show what triggered the camera and when. Record and save events for up to 30 days.
7AUXTROLLEY10

LiftMaster AUX Trolley Mod JDC/JHDC 7 10ft (Incl. TDC48-1 (1) Chain #48 (1) 1"x 12' bar (2) 10-5810-P Tracks

  • AUX TROLLEY MOD JDC/JHDC 7 TO 10'
  • 7AUXTROLLEY10 is an auxiliary trolley kit for LiftMaster® Maxum JDC and JHDC Commercial Door Standard Duty Operators up to 10 ft.
  • Provides trolley type operation on standard lift doors (sectional) where side mount operator is preferred over a trolley operator.
TXTA-200

Pulse 3-BTN Transmitter 315MHZ

  • Three-Button Transmitter: Can be programmed to operate with up to three different receivers to operate up to three doors or for Open Close and/or Stop functions
  • 315mHz: Works with RXTA-100 and RXTA-200 or as replacement unit for other LM receivers with 315MHz frequency.
  • Provided with visor clip for forklifts and trucks.
  • FCC Approved
E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

  • Used on the BL229 gate op.
K07-8003

LiftMaster lower Crank Link BG770/790 Barrier Gate

  • For use with BG770/790 barrier gate operator
2806.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Roadside

  • Replacement torsion spring with cones
  • Specs: .1182 x 2-3/16" x 29" Long
  • Roadside
  • For Curbside order part # 2807.182*290
JHDC22X4BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 480V 3PH 60 Cycles/Hour 2200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
Auxiliary ModificationDual Auxiliary Trolley ModificationMAXUM Manual dinstallationMAXUM Installation ManualMAXUM Fiche TechniqueMAXUM Data SheetMAXUM Product GuideMAXUM Buying Guide
L991S

LiftMaster 1-btn Standard Visor Remote Control Sec+ 3.0

  • Compatible with LiftMaster® Security+ 3.0™ garage door openers.
  • Up to 1300 ft. range (conditions permitting).
  • New and improved seamless set up.
  • Control one Security+ 3.0 garage door opener.
  • NEW! Set up and manage your remote in the myQ app for a more personalized experience.
  • Ultra-secure encryption.
    • .......more details
Installation ManualManual d'installationCompatibility Chart 2025Comparison Chart 2025
2100-917-UPS

Linear Shaft Output 1" HSLG UPS