Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
DB13-T

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Tapered Sides Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • 4-1/2" depth
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.
    • .......more details
LB1212-14

Laminated Bumper Standard Black 12" L x 14" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB910-14

Laminated Bumper Standard Black 10" x 14" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-18

Laminated Bumper Standard Black 10" x 18" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
AIRSWITCH016

Fraba Air Wave Switch Only

  • Fraba air switch only
K32-8002

LiftMaster Gear Reducer for BG790 Barrier gate operator

  • Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002
02-404

LiftMaster Key Switch Assembly On/Off Nema 4/12 **DISCONTINUED

  • Two Position Key Control Station
  • Outdoor Surface Mt. (NEMA 4/12)
  • Non-Tamperproof
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only.
  • Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
  • Die cast metal enclosure
    • .......more details
MB-03001

Micanan Electric Motor Only 1 HP 110/220V 1PH Base Mount O.D.P FR56

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD
CP-NCAM

Lynx Limit Cam 5/8-24 Travelling

  • Limit cam / limit nut
BINS-BLACK

Utility Bin Heavy-Duty Stackable Black ** No Longer Available

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
ALUM-5P3

Aluminum 24" x 100' Spool Espresso # 5P3

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P3
  • Reverse side is #431 Bright White
Colour chart
H503L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
44-60-220

Extension Spring 10' Door - 220 lbs *** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 220 lb load
DM120-T/FORCE

Cable Drum High Lift 120" D575-120-1 Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
MP-00032

Micanan Center Mount Modification W/ No Chain Hoist PRO-J

  • Provides for center mount installation of a jackshaft operator
  • Operator output shaft is coupled in line with door shaft assembly
  • Couplings NOT supplied
  • NOTE: Reverse limit modification required
HBS23LUD-H

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Double End Stile Heavy-Duty Sold per Pair

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Low-Headroom Track
  • For 2" or 3" Doors
  • Fits 2" or 3" Track
  • Double End Stile
    • .......more details
BCH101L5L-BZ

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. LH ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
    • .......more details
Installation instructionsManuel d'installationSell sheetBrochureWiring instructionsInstructions de cablage
PRO-HBH-5011U-R

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
50-ALMARM-DOT

LiftMaster 15 ft Aluminum Barrier Arm Square White Aluminum with Red/White Retro-Reflective DOT Tape

  • Used on BG770
  • Arm adaptor included
  • 15' x 2.5" square arm
  • Replaces 50ALUMARM
GH-3-LH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Left Hand

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
ME00002

Micanan Clutch (Input) Shaft Only for Pro-H/HB

  • 3/4" x 16-3/8"
SBX-N4-P-0000-FD

Micanan Control Box Eurodrive Limit Box

PRO-HBH-7583U-L

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
510.PSKE.00

Whiting Penske Spec. Option

  • Options that are unique to the Penske fleet which include:
  • Side seals
  • Stainless steel rivets on roller hinges
  • Countersunk aluminum rivets on centre row of hinges
  • Galvanized scuff liner on inside of bottom panel
  • 12” pull strap on inside of door
    • .......more details
MV-00245

Allen Bradley Thru-Beam Photocell 42GRL Rec/Trans 110V 0-30ft Range

  • 42GRL 9000 and 42GRR 9002 transmitter 110V/receiver (24/115V) set
MP-00008

Micanan Two-Door Interlock Modification

  • Only allows one door to be opened at one time
PRO-H-5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Solenoid brake OPTIONAL
Installation manualSpecification sheet
41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

  • A one piece travel module replacement kit.
  • Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
  • Same as 041D7742-5
K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

  • Hall effect assembly for SL540/570/580/575/585 operators with GL Board
  • Includes: screws flat washers lock washers and replacement instructions
  • Same as: G74G0487
  • This part has a short lead-in wire and will not work with SL590 or SL595
.312-6-L

Cut-to-Length Torsion Spring .312 x 6" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
P220-1K

Heddolf 1-btn Transmitter 9-Dip Switch 318 MHz

  • 318MHz single button 9 trinary dipswitch remote control transmitter
  • Compatible with Allstar and Pulsar
  • Compatible with P294-K receiver
28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

  • Kit includes part # 28018A and # 28019A
  • Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
  • Includes 1 Belt Bullet and 2 Retainers
7812

Whiting Bottom Seal Truss Door White 90" Long

  • Fits Fed-Ex truck doors
38079001

Agri Safety Chain GR 70 3/8" x 69"

  • Min. strength: 20200 lbs
  • Includes hook joiner link & tag
ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Aluminum on the reverse side
  • Gentek # 431
Colour chart
720118

FAAC Latching Plastic Enclosure

  • Dimensions: 4.65" x 8.38" x 0.6"
LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

  • The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
  • DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
  • Optional Battery Backup available for added peace of mind. Sold separately
  • Low-power standby mode dramatically reduces energy consumption
  • Supplies 800 Newtons of lifting force for heavy doors
  • Compatible with belt-drive or chain-drive T or I beam rails up to 10'
    • .......more details
Installation manualSell sheetRemote compatibility chart
ALUM-506

Aluminum 24" x 100' Spool Windswept Smoke/ Vent Fumee # 506

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 506
  • Reverse side is #431 Bright White
Colour chart
.343-514-R

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
7001-14-CHARCOL

Commercial Side & Top Weather-Strip 14' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
MK00661

Micanan Varistor for Circuit Board 110V *** No Longer Available Use MK00707

K72-13057

LiftMaster Clutch Shaft Kit APT

  • Kit contains: Clutch Plate Clutch Shaft Bearing 3/4" I.D Sprocket 41B10x3/4" 5L Belt Motor Pulley Spring Clutch Disc Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener.
MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

  • Exterior Through-Beam Photocell
  • Sensing Distance 45 Feet
  • UL325/2010 Recognized Component
  • Comes with Sender Receiver and Brackets
  • NEMA 4 & 4X
Installation manual
TBKL-14X4

Turnbuckle Loop Ends 1/4 x 4" WLL 500 lbs

  • Hot dipped galvanized drop forged with lock ends
  • Eye & Eye ends
  • Work Load Limit : 500 LBS
  • Open Length: 12.18"
  • Closed Length: 8.83 "
POCKETWHEEL005

Manaras Pocketwheel Opera

15-50B12LGH

Sprocket 12 Teeth 1" Bore 1/4" Keyway

  • Same as 50B12x1
CL-74-RH

Wayne Dalton Complete Replacement Barrel Assembly 4.5" Diameter 74" Long

  • Replacement for serial # 10093517-1 PIPESM
K75-12870

LiftMaster Complete Door Arm Kit for Trolley Operators

  • Kit includes: Curved Arm Straight Arm Door Bracket and Hardware
  • For All LiftMaster Trolley Operators except HCT and APT
5735.96

Whiting Bottom Seal Grey 96"

  • For Dry Freight and Truss Doors
CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

  • Lead probe ONLY. Requires the CS303-C-1 detector.
  • Easy installation above or below ground
  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Sensitivity display
  • Single cut installation with flat pack model
MD-00006

Sprocket 41B10 x 3/4" NO KW 2SS 1/4

LYNX-6000-BOARD

Lynx 6000 Commercial Logic Board

  • Replacement logic board for Lynx commercial operators built from 2002 through 2005
  • Will not work for the ALDJ Model (Light Duty) •
Basic Operation Manual
WASHER008

Manaras Type A Plain Washer 5/16" Zinc Plated

  • Used on old MJH
MB-02002

Micanan Electric Motor Only 3/4HP 110/220V 1PH TEFC

  • Base mount motor fits: TW TBW JW HW HHDW SDW
5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

  • Pierced track
124773

Roller 3" UHMW 7-1/4" Stem Rubber

  • 3" UHMW tire covered with rubber
  • 6202 sealed precision bearing
  • 7-1/4" zinc plated stem
  • Rating: 200lb load; 10000 cycles of a 12' door
  • Helps quiet the operation of jackshaft operators
TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

  • Priced per each
CPS3CARD

LiftMaster Option Card Only (41K0811)

  • Works with all commercial Logic versions L2 L3 L4 L5
  • Use with CPS-U to add a second set of eyes to the operator
  • Allows activation of Timer-To-Close without CPS-U
  • Simply plugs into Logic board
  • Cut resistors on JU1 & R16 to activate timer feature
  • Same as 041K0811
    • .......more details
ME123-M-YEL-RH

Miller Edge Yellow RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
CS303-C-1

EMX Car Sense Vehicle Detector Control Unit *** Replaced by LRS-C1

  • The CarSense™ 303 features advanced 3-axis magnetoresistive sensing technology.
  • The sensor measures Earth’s magnetic field and responds to disturbances caused by ferrous objects.
  • The CS303 combines this exciting new technology with a fieldproven hardware platform to produce a high-sensitivity compact and cost-effective solution for reliable vehicle detection.
  • Three sensing elements provide magnetic field measurement in the X Y and Z axes improving detection sensitivity.
JRGX114

Chain Hoist Jack Shaft JRG V2 1-1/4" Shaft Torque Force (126690)

  • Jack Shaft Mounting plastic guide 4.5:1 reduction
  • Gear drive
  • Fits 3-3/8" minimum offset
  • Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
  • 1 chain keeper
  • 2 shaft collars
    • .......more details
Sell sheet
MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

Sell Sheet
50180

Doorlec Brake Assembly 120V

20-1050B-2RLP

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

  • Replacement motor for APT
  • Also known as 20-1050B-2RL 20-1050B-2R K20-1050B2R
  • For L3 and L4
38874R3.S

Genie Electronic Circuit Board Assembly

  • Replaces board 38001R3.S and 37470R3.S
  • Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030
SF375-114

Spring Fitting 3-3/4" Pair (Long Ear) 1-1/4" Bore

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1-1/4" solid shaft
  • 3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.
    • .......more details
DC2000SL

LiftMaster Power Backup *** Discontinued

  • Keeps traffic moving during a power outage
  • Opens the gate when power goes out to allow vehicles to enter or exit
  • When power is restored the gate will return to normal operation
  • Compatible with operators: SL3000UL
MK-00011

Micanan Radio Control Terminal Strip

CABLE-NR-14-CC

Cable No Roll 1/4" 19x7 Non-Galvanized C-Coated 500ft

  • 19X7 rotation-resistant wire rope.
41D7675

LiftMaster Receiver Logic Board 2.0

  • Also known as: 45ACT
PRO-APT-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

25E10050

Truck Door Center Hinge Black E-coat finish for Todco Roll-Up Doors

  • Steel construction Black E-coat finish
BG790-50-11

LiftMaster Industrial-Duty Wishbone Barrier Gate Operator 1/2 HP 115V Arm & Weight Included ***Must include Arm G651208R***

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • Includes a 24' arm
Installation ManualSell Sheet
K75-34790

LiftMaster Disconnect Kit for SL585

  • Kit includes: Release lever bracket cable compression spring washer screws clevis pin bushings roll pin bolts nuts & handle
Installation Manual
T112

Manaras Trolley Track 12ft for 3/4HP & All APT models *Actual length 174"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
HSC-1000

Hand Swager 1/4" & 5/16"

  • Swages 1/4" and 5/16"
  • Made in Japan
SBPFL205-16

Flange mount Sealed Roller Bearing 1" Bore Football Style set screw locking

22-460

Brake Solenoid 440-460V

  • Used on all brands of commercial door and gate operators
  • same as MK-00028
29200

Doorlec Transformer 208V pr 120V sec 35VA

  • 208V prImary 120V secondary 35VA
MK00799

Micanan Smart 10.0 Full Feature Circuit Board Non- Monitored with H.D Relays (MK00701-NM)

  • For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
  • The board does NOT have P1 & P2 terminals
Instructions Manual
1104-8'-DES-SAN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Desert Sandstone

  • Garaga desert sandstone rigid vinyl retainer with Garaga desert sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
12-19504

LiftMaster Flanged Bearing 1" Keyed

27-48-150

Extension Spring 8' Door - 150 lbs Red

  • Single - Loop
  • 27" long 48" stretch 150 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-140

Extension Spring 8' Door - 140 lbs Blue

  • Single - Loop
  • 27" long 48" stretch 140 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

  • Double Angle Rails for doors up to 16' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 18' 11"
K1D8052-1CC

LiftMaster Control Board for LA500DC LA400 LA412

  • 014D1270D
MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

  • Electric motor comes pre-wired for a brake
  • Must specify if operator is equipped with electronic circuit board or if it is hard-wired
9003-13FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 13' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
1224-1-3/4"-WHT

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
H753L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
SLT14-20P

Rolling Steel 3" Flat Slat 20-ga Primed

SLT14-20

Rolling Steel 3" Flat Slat 20-ga Galvanized

GH153-L5

LiftMaster Gearhead with Brake 1-1/2 HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
MOD034

Manaras Monitored Photocell Upgrade N1 to N4

  • Ideal for industrial environments submersible and impact resistant.
  • Flexible design withstands and realigns after mechanical impact.
  • Max. range 45ft.
  • Incl. photoeyes 3ft of conductor wire and mounting hardware.
  • Applies to all operator models with electronic control "M" types.
RBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
CS202S-5-100

EMX Car Sense Vehicle Motion Detector ** Discontinued Offer VMD202 instead

  • Low voltage used for automatically opening gate when exiting property without requiring the use of a remote control transmitter key pad or any other operator control device.
  • Can be located up to 150' from the gate. Senses automobiles on a driveway up to 12' wide moving more than 5 m.p.h.
  • A second probe can be connected in parallel for additional coverage or for automatic opening in or out.
  • Available in a five wire (recommended for use with GTO operators) and a three wire version.
  • The CarSense 202 is buried in the ground so it will not be noticed by a potential intruder or vandals.
  • The CarSense 202 accepts a wide range of power input of 9 - 41 VDC and 6-29 VAC. The low current consumption of 250uA and 12mA detected make the CarSense 202 Slim a great choice for solar applications
    • .......more details
Installation ManualSell Sheet
Q311

LiftMaster Surge Protection for Master / Second *** No Longer Available

  • For the Miracle-One two arm gate operator - master/ slave
  • Same as part no. K74-50329