Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
BCH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand ***Replaced by CRBH753L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification
  • External brake included
  • Comes with CPS-UN4 photoeyes
Installation manualManuel d'installationSell sheetBrochure
BL-08

Barlock Kit Complete for 8ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (49-1/2")
Assembly Manual
COAX-5-RG6

Coax Cable Assembly 5 ft

  • Assembly includes union
PRO-LH-5011R-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Right Hand (PRO LHR)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • No longer available in contactor model (2017)
Installation manualSpecification sheet
26-943255

Truck Door Bottom Panel with Seal (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
23-20088

LiftMaster On/Off Switch 120V 15A

  • Also known as: SN5530039 MA019
620-00993

Linear Heater Kit 230V

  • Heater kit for slide gate operator 230V
92803N6000

Truck Door .187 x 2.188 x 60 RHW

.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
TILT-5

Tilt Detector

  • State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
  • Safeguards against rolling steel door failure where conventional devices miss
  • Automatically stops the operator to keep door within safe parameters
Sell sheet
EQ2712

SkyLink 3/4 HP Garage Door Opener with 1 Remote ** Discontinued

  • The DC motor offers additional benefits with very quiet operation and much less vibration.
  • It is ideal for garage doors that are below a living room or bedroom.
  • The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
  • Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
  • Available in either Belt or Chain drive
Installation manualSell sheet
7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
110550

Allstar MVP 3 Channel 24V 3 Terminal 4 Wire Receiver 318 MHz *** NLA

  • 3 channels 4-wire 3-terminal operator connection
  • Wire antenna included
  • Compatible with Allstar Classic Allistar and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
  • RF frequency: 318 MHz
    • .......more details
Programming instructions
7-28-1A

Lynx Standard Barlock Kit Bars sold Separately

  • Bars are sold separately.
  • Hardware bag for doors 12' and under
Assembly Manual
K002B0821-1

LiftMaster Transformer for EL1SS and EL25

  • 120 volt input power plugs into a standard outlet
  • 16VDC output 2.5 amps
37314

Doorlec Relay Mini 120V

  • For overrun pre-wired 25 Amp
GAREX-READY

Garex Ready to Install Door Special Order

  • specify size color details when ordering
  • Please call for pricing
MGH-6114-ECB-LH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation manualSell sheet
SNS1P6

Belden RG6 Co-axial "F" Male connector Snap-N-Seal

6976.182.23.440

Whiting Single Spring Balancer Assembly .182 x 23" x 44" Shaft

CB-1.097

Whiting Stainless Steel Cable 97" L with Plain Grommet 5/16" Eye

74-4SG1A

Fuse Slow Blow Miniature Glass Fuse 2AG 1A 250V 5/Pkg

  • 4.5 x 15mm miniature slow-blow glass fuse
  • Rated voltage: 125V/250V
  • Rated current: 1.0A
  • RoHS compliant
  • 5 per package (clamshell)
5001-18-BLACK

Residential Side & Top Weather-Strip 18' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-8-BLACK

Residential Side & Top Weather-Strip 8' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-7-BLACK

Residential Side & Top Weather-Strip 7' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
1104-12'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Light Bronze (F)

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
5001-18-CHARCOA

Residential Side & Top Weather-Strip 18' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
K12-8033

LiftMaster Female Rod End RH

  • Lower rod end for BG770 BG790
  • same as part # 12-8033
PRO-HBH10011U-R

Micanan 1 HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
783

Fasteners Hex Head Bolt Gr 5 3/8-16 x 1-3/4" 650/Box

  • 3/8" bolt has 9/16" head
  • Max torque = 22
  • Full thread
  • Grade 5
510.7302.07

Whiting Stainless Steel Interior Hdwr Pkg DEH Steel 7-Panel Door Up-grade Option

  • Double end hinge option
41D7570

LiftMaster Light Lens (41D7572)

  • Also known as 041D7572 41D7571 41D7570 41D7572 041D7571 041D7570 041-0144
SA-TORSION-ASSY

Complete Torsion Assembly Special Order

  • Special order
PRO-HB-7511U-RH

Micanan 3/4HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
Installation manualSpecification sheet
.319-6-LH

Cut-to-Length Torsion Spring .319 x 6" Left Hand Blue/Green

  • Spring wire only. Cones and Filler extra
50030

Doorlec Key Switch with Spring Return in Waterproof Housing

  • Weatherproof start key switch
  • Nema 4 enclosure.
  • Cast aluminum base with tamperproof aluminum cover
  • Rating: 10 amps 124VAC
  • Contacts: Single pole silver alloy momentary contact
  • Two keys supplied with each switch
    • .......more details
SA1906/031

AS1320 Logic with Top Cover Assembly BL3X SAV

5001-WG-14-MOAK

Residential Side & Top Weather-Strip 14' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
5001-WG-8-MOAK

Residential Side & Top Weather-Strip 8' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
Q085

LiftMaster Dolly Cover HCT K09-50756

  • Same as K09-50756
28-03190

Truck Door 1" Vert. Track and Right Angle Assbly Roadside (LH) 96.5" Todco Style***To extent of inventory

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes right angle frame 1" track and operator bracket
  • Fits doors 72" - 90" high
28-00190

Truck Door 1" Std Vert. Track and Angle Assbly Curbside (RH) 96.5" Todco Style

  • Fits Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • For door opening less than 90" high
  • Fits door sizes 72 - 90" high
  • Cross ref: T #49014-1 T #41034-1 & W #4046
    • .......more details
POCKETWHEEL007

Manaras Pocketwheel Assembly with rollers and clips (Hoist-A-Matic)

  • Includes POCKETWHEEL005 CAM012 and CLIP020
COUPLING019

Manaras Manual Hoist Coupling

  • For Opera-SH
750

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)
801-300-001-00

Equinoxe Long Range Receiver 1-Door 433 MHz Pre-2016 *** To Extent of Inventory

  • 1000 ft range
  • Old generation - prior to 2016
Programming InstructionsInstructions de programmation
K20-1050B-1RL

LiftMaster Electric Motor 1/2 HP 115V 1Ph BM

  • 1/2HP 115V 1 PH resilient base mount motor with one drive shaft key.
  • Check the manual for your specific model number before ordering to ensure compatibility.
27-20010

Truck Door Dual-Spring Shaft 96" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
3-32-1

Low Headroom Top Bracket 2" Residential

  • For residential door with 2" track
CL-74-RH

Wayne Dalton Complete Replacement Barrel Assembly 4.5" Diameter 74" Long

  • Replacement for serial # 10093517-1 PIPESM
BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

  • Maximum cable diameter: 3/16"
  • Maximum door weight: 1300 lbs Zinc
  • Plated Steel
  • Sold as a pair
Installation manual
2B737

LiftMaster Output Board EL25

  • Output board for models EL25 and EL2000 (041B0737)
2704.192_340

Whiting Roadside Torsion Spring 2-3/16" ID 34" Long

  • Torsion spring wire only
  • .192 wire size
TUBE_SHAFT_12FT

Hollow Shaft 1" x 12'-10" Galvanized 16 gauge

  • When ordering order one foot longer that actual door width
BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

  • Used on old MJH
K001A3200-2

LiftMaster Gate Receiver Isolation Kit

  • Isolates the 850LM receiver from the ground loop and prevent the fuse from blowing.
3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

  • Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
  • It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
  • Maximum recommended duty cycle: 10 cycles per hour.
  • UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
  • Heavy-duty 24V DC motor provides ultra-quiet operation
  • Push button limit setting
    • .......more details
Installation manualSell sheet
CS303-FP-50

EMX Car Sense Direct Burial Sensor Flat Pack 50ft ** Replaced by LRS-FP-50

  • Lead probe ONLY. Requires the CS303-C-1 detector.
  • Easy installation above or below ground
  • Ignores cross traffic in tight spaces with DETECT-ON-STOPâ„¢ feature
  • Sensitivity display
  • Single cut installation with flat pack model
71-MLSBC

LiftMaster Single Button Control Mod. Field Kit Mod. Logic

  • Field service mod. for adding single button feature to medium duty logic operators
C20-SR

Bearing Retainer for 1-1/4" (PFL6Z)

  • Same as PFL6Z. Bearing flangette only.
  • 1-1/4" press fit
C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

  • Stamped bearing for lighter loads
  • For a heavier duty machined bearing use R5114
EC002-277

Automatic Systems Spring Assembly 06/04 for BL27

  • French description: Ensemble ressort 06/04
  • For model BL27 gate operator
28020020-500

Cable Stainless 5/16" 1x19 500' Inox ** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
28020004-500

Cable Stainless 1/16" 1x19 500' Inox *** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
104083

Marantec Reference Switch for Belt and Chain Rails

  • This part works with the positioning tab and motor to determine the open & close limits of the actual garage door.
H12G11-SS

Hinge #11 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G12-SS

Hinge #12 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
V3563-00-W-200

Vinyl Seal 3" Bottom Bead End 198" Bead Grey 200' Spool

  • Bead diameter 3/16"-7/32" +/- tolerance
ME123-M-YEL-RH

Miller Edge Yellow RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ME123-M-BLK-LH

Miller Edge Black LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
39142R

Genie Aladdin Connect

  • Aladdin Connectâ„¢ controls and monitors your garage door opener with your smartphone
  • Compatible with smartphone iPad(R) & tablet devices
  • Easy installation & setup
  • Operates up to 3 doors with 1 system
  • Able to program timed closed functions
  • Wi-Fi communication Retro-fit capable Works with all brands
    • .......more details
Quick set-up guideGuide d'installation rapide
JRGX114

Chain Hoist Jack Shaft JRG V2 1-1/4" Shaft Torque Force (126690)

  • Jack Shaft Mounting plastic guide 4.5:1 reduction
  • Gear drive
  • Fits 3-3/8" minimum offset
  • Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
  • 1 chain keeper
  • 2 shaft collars
    • .......more details
Sell sheet
BK020/PR

Commercial 2" Safety Bottom Bracket Sold as a Pair (L & R) *** No Longer Available

  • Maximum cable diameter: 3/16"
  • Maximum door weight: 1300 lbs Zinc
  • Plated Steel
  • Sold as a pair
1003-4-DF-200FT

Bottom U-Rubber 4" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
19-5116

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door

  • For 3/4 & 1 HP trolley operators
19-5118

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door

  • For 3/4 & 1 HP trolley operators
DL-4000-6

Dock Leveler Retainer Galv. Steel Weldable 6' Long *** To Extent of Inventory

  • Weldable to sides of dock leveler
  • Use with 4007 aluminum retainer & light brush (not included).
  • Vinyl insert slides into this outer retainer.
PPLX

LiftMaster Stand Alone Proximity Reader ** NLA

  • 6" read range
  • 50000 user capacity
  • Multiple Wiegand protocol (Sentex® 26-bit industry standard PassportTM)
  • Programmable as stand-alone or Wiegand pass-through
  • Simple-to-use handheld radio programmer (model PPRP; sold separately)
  • Programmable output relay (NO/NC)
    • .......more details
Programming instructionsSell sheet
21-7115-1

LiftMaster Transformer 115/230V 1Ph

19-5118-NP

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door Nickel Plated

  • For 3/4 & 1 HP trolley operators
BRAKEPART016

Manaras Brake Pad Assembly MLT MLJ MLH

  • Includes: 1 x BUSHING026 1 X CLUTCHPLATE008 1 X PLATE041
7220355

FAAC 400 Front Fitting

7119405

FAAC 400 Plug for End Cap

19-48047MN

LiftMaster Roller Chain #48 x 47 Nickel Plated

  • #48 x 47 pitch with master link
PHOTO-062

Manaras Monitored Photoelectric Cells N1 Thru-Beam 20' Range ** NLA use PHOTO-070

  • Monitored NEMA 1 enclosure through-beam type photocell
  • 4-Wire
  • Indoor
  • Range: 20 ft
65_52091-14

LiftMaster Manual Hoist Mod. M8 #41 Chain for 14ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
Installation Manual
K74-33015

LiftMaster Electrical Box Replacement Kit L3 **to extent of inventory

  • For models T GT and GH L3
MGS20-Y-2L-05

Miller Edge Sensing Edge Square Yellow 2-Wire Left Hand Outlet 5ft Long

  • €¢Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
T-833-H

FL-Heddolf 3-btn Transmitter 311 MHz ** this model is discontinued

  • Open/Close up to 3 doors or Open/Close/Stop one door
  • Heddolf-Keystone 3 button transmitter 311mhz
  • 8 3-Position dip switch format
  • 9V battery and metal clip included
  • Compatible with Allstar 3 button T-833
  • Same as P220-3K
    • .......more details
9291644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones LHW

MD00044

Micanan Spur Gear 12B60

FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

  • Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
  • 304L rust-resistant stainless steel
  • 12 gauge
S142BRNN924

Carlo Gavazzi Amplifier 24V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
    • .......more details
T-931-H

FL-Heddolf 1-btn Transmitter P220-1K-311 MHz **this model is discontinued

  • Open/Close remote for 1 door
  • Dip switch led 9V battery and metal clip
  • Compatible with Allstar 1 button T-931 and T-931-M
  • New style transmitter case
MUSHROOM-PB

Lockable Mushroom Push Button with 1 NC Contact

  • N/C Contact "Stop"
  • Push to Stop Turn to Unlock
  • NEMA 4 Enclosure
FL-T50

FL-Heddolf 1-Button Dip Switch Remote FL 311MHz *** Discontinued.

  • ID220-1KA Heddolf remote
  • 9V battery & metal clip included
41A2770-17

LiftMaster Hardware Kit for 8550 8160W

  • Universal Hardware bag for LiftMaster 8550 8160W Operator.
OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
Installation manualSell sheet