Devanco Canada - Get The Right Garage Door Opener‎ and Parts

02-406-2

LiftMaster Key Set Qty 2

Replacement Key ONLY for 02-406 2006-2015 #1 or #1502M

60-6550-A-BLK

Speed Bump Black 36" Econo Light Weight for Asphalt *** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

103-T-8X10-VL

Hardware Set 3" Industrial 103-T for 8' x 10' VL

A variety of options and sizes are available call for quote
Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.

RELAY008

Manaras Relay AB 700-HA33A24 11 Pin TP

Allen Bradley

2500-2346-LP

Linear Plug-In Loop Detector LP PVT LBL

Programming instructions

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

41A4353-1

LiftMaster Header Bracket and Clevis Pin

PRO-GH-15011U-LH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

K1D8424-1CC

LiftMaster Power Board 3 Ph SL585U/SL595U

For use with LiftMaster® SL585U & SL595U Series; and various 3 Phase Commercial Slide Gate Operator Models.

7206

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors for #7176 Balancer

Steel construction
Plain finish
Whiting original

K30-205-E

LiftMaster Boot Red

Also known as: 30-205-E 30205E
Replacement button cover for 02-406 station

ERM40600H00

NICE Era MH Tubular Motor 40Nm 14rpm 120/60 12'

There must be at least 0.4 m between the driven parts and any xed elements
If the cable is damaged the appliance must be scrapped. The power cable cannot be replaced

41A3473

LiftMaster Chain and Cable Kit 7'

Also known as: 65410 41A3473
One piece 7 ft. chain and cable replacement kit installed on 7ft garage door

.192-134-R

Cut-to-Length Torsion Spring .192 x 1-3/4" Right Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

H7NA12

Richards-Wilcox Hinge 7NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

K081C0168

LiftMaster Screw Drive Rack

Also known as: 081C0168 81C168
This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240

TRACK-SET-2STD-12

2" Tracks Set 12'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

TRACK-SET-2STD-10

2" Tracks Set 10'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

G3243

GDI Battery Backup Option G3243

BBU option if AC power is lost

BRX10

GDI Brake Kit Brake Kit with Pull-rods; Axial

H14G03-BLACK

Hinge #3 x 14 gauge Black Powder Coated

Black powder coated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
Individually wrapped

2100-564

Linear Clutch Disk Facing HSL HSLG

22010-UNCUT-KEY

Doorlec Un-Cut Key for 22010 Sold Each

AW-10

Miller Edge Air Wave Switch Only No Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instruction manual Sell sheet

SF375-W

Spring Fitting 3-3/4" Winding Side Only

Universal thread for use in either LH or RH wound springs.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions

SPRING001

Manaras Cam Guide Plate Spring

2376.177*26.960

Whiting Torsion assembly .177 wire size 26" spring length 96" shaft

P-75

End Plug for 3/4" ID Rubber Hose

Sold per plug

30005

Doorlec Brake Solenoid 208V with wire leads

BTN-8L5-GR

Devanco green replacement button for 8L5-OCS

green replacement button for 8L5-OCS

2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

This is a full balancer assembly

FLO1R-SA

NICE 1-btn Keychain Remote 433.92 MHz

Rolling code No internal dip switches programming with the reciever
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

GATE_RN3.5

Nylon Gate Roller for Cantilever Gate

L-14-50-0-D

Cable Tie Standard 50 LB Black 14" Nylon 500/pkg

Ultraviolet Resistant
Length: 14.56" / Width: .180" / Thickness: .052" / Diameter: 4.125"
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening

.......more details

1004-2-10'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 10 ft***Actual Length 10'1"***

For door thickness 2"

CP-CLH-58

Lynx Clutch Hub 5/8"

SS-STRUT-10

Strut Stainless Steel 2-1/2" x 10ft 16-Ga

K76-34697

LiftMaster APS Encoder 24V

For use with various LiftMaster® Commercial Slide and Overhead Gate Operators

Q170

LiftMaster Control Box Cover HCT K75-50190

Replacement Control Box Cover Q170.
Compatible with LiftMaster® Model HCT Overhead Gate Operators

10-12360

LiftMaster Universal Hood Angle Mounting Bracket 10-12360M1

Heavy gauge steel bracket for vertical or horizontal mount on either front or top of coil on a rolling door.
Has a variety of mounting hole patterns compatible with many OEM manufactures
For use with J H DJ DH
May be welded

63001015

FAAC Limit Switch Assembly P740-741

For models 740-741

MD-00252

Micanan Connecting Link #50

510.2996.07

Whiting Steel Roller Upgrade Option for 7 Panel DF Door

Upgrade option only - must accompany a door order

ME00054

Micanan Clutch (Input) Shaft Only for Pro-H/HHD N4 3/4" x 17-5/8" (3/4 HP-1 HP)

3/4" x 17-5/8"

LIMIT017

Manaras Micro Limit Switch SPDT

CAP001 sold separately

CAP001

Manaras Push Button Sealing Boot for LIMIT017

C184-24B

Coil Cord 4 Wire 18-Gauge Black Extends 24ft

PRO-APTC-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

PRO-GHC-10053U-R

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

Input / clutch shaft kit for MTH MTBH
For old MTH MTBH with 1" diameter input shaft no pulley included

MH00019

Micanan Precision Bearing 3/8" ID ** Replaced by MH00096

20104

Doorlec Coupling Spring 5/8" LJH

14219

Doorlec Disconnect Arm LJH

1005-1-3/8-8'

Aluminum Bottom Retainer U-Shaped 8' Long

For door thickness 1-3/8"

MODKIT003

Manaras Time Delay Kit 1.5 Sec For Contactor Models

MODKIT003 for field upgrades
Order MOD003 when ordered in conjunction with a commercial operator

HCT10

LiftMaster HCTDCU Rail Only for 9'6" Door

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit

PRO-GH-7523U-R

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

.393-514-L-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

SG-13-NO

Telco Light Curtain with Rectifier Normally Open 72" (13-193-028-D1-E-H58-5) ***No Longer Available

Normally Open
SGR13-193-028-D1-E-HS8-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NO relay output 15m cable

Specification sheet Wiring diagram

.343-514-L-C

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

.343-258-R-C

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.306-6-R-C

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.306-6-L-C

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.306-514-L-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.295-334-R-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.295-258-L-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.273-134-R-C

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-2-L-C

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.250-334-L-C

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.250-2-R-C

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.250-134-L-C

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-2-R-C

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.207-258-R-C

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-GH-7521U-R

Micanan 3/4HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5021U-R

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand (PRO GHE)

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-HHD-10043U-R

Micanan 1 HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1 HP460V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual Specification Sheet

PRO-HHD-10081U-R

Micanan 1 HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1 HP208V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual Specification Sheet

PRO-HBH-7543U-R

Micanan 3/4HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP460V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

PRO-HHD-5081U-R

Micanan 1/2HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1/2 HP208V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN) Specification Sheet

PRO-HB-7538U-RH

Micanan 3/4HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

RADIO-RE900A

Manaras 1-Channel 24V Dip-Switch Receiver with Commercial Antenna 313 MHz *Replaced by RADIO-RE901A

For Commercial/Industrial Garage Door Applications
Wall Mount
Fixed Code / DIP Switch Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz Radio Frequency
Controls One (1) Door

.......more details

PRO-HB-7543U-LH

Micanan 3/4HP 460V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-5038U-RH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5043U-LH

Micanan 1/2HP 460V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

MOTOR281

Manaras Electric Motor TEFC 1 HP 208/480V 3PH for N4/12 Applications

Electric motor only- not wired
Continuous duty base mount 56Z

CLIP020

Manaras Pocketwheel Roller Clip

PRO-H-7521-U-RH

Micanan 3/4HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5053-E-LH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

PRO-H-5053-E-RH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes