Devanco Canada - Get The Right Garage Door Opener‎ and Parts

375LMC

LiftMaster Universal 2-btn Transmitter ** USE 380UT

Dual frequency universal transmitter
Will activate 2 different types of openers (1 on each button)
Compatible with major brands except Marantec & Hormann
Visor clip and battery CR2032 included

Programming Instructions Instructions de programmation

71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
Works on LiftMaster trolley garage door openers

Instruction Manual

41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

For models: 3800 3800P & 3800PLD
Also known as 002D1622

41D3452

LiftMaster Limit Switch Assembly

Compatible with most operators 1986 - current

23-2015

Limit Switch DPDT 15A 125/250VAC (K23-2015) *** No Longer Available

24-24-1

LiftMaster Relay 24VAC 8-Pin DPDT Flange

29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

Gear and sprocket assembly for belt drive units after 2002.
Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.

Installation Manual Manuel d'Installation

T-53-S

FL-Allstar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

This remote can control (open-close-stop) up to 27 doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 535T (190-107475)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8"

Programming Instructions

T-733

FL-Allstar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

This transmitter can control (open-close-stop) up to three doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 733T (190-107477)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8".

Programming Instructions

CP-SW-TD6A

Lynx Switch Light Delay

For the old Lynx 455 operators

CAM011

Manaras Limit Cam

Limit cam for Mountshaft018A 018B
2 cam's required per shaft

24-115-1

Relay 8 terminal 115VAC DPDT

For most operators with contactor
Will work on Liftmaster MH Lynx MCJH and more

41B3869-3A

LiftMaster Trolley Kit for Belt Drive

Complete trolley assembly
Replaces 41B3869-1

41C4398A

LiftMaster RPM Sensor Kit

RPM sensor assembly 1986 - present

Installation Manual_bilingual

.393_6"-RH

Torsion Spring .393 x 6" x 12ft RH Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft

.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

.363_5-1/4"-RH

Torsion Spring .363 x 5-1/4" x 12ft RH Green/White

Wire size: .363
Inside diameter: 5-1/4"
Length: 12 ft

.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

Wire size: .393
Inside diameter: 3-3/4"
Length: 12 ft

.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft

.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft

.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

.306_3-3/4"-RH

Torsion Spring .306 x 3-3/4" x 12ft RH Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft

.250_3-3/4"-RH

Torsion Spring .250 x 3-3/4" x 12ft RH Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft

.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft

.306_2-5/8"-RH

Torsion Spring .306 x 2-5/8" x 12ft RH Red

Wire size: .306
Inside diameter: 2-5/8"
Length: 12 ft

.273_2-5/8"-RH

Torsion Spring .273 x 2-5/8" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

.283_2-5/8"-RH

Torsion Spring .283 x 2-5/8" x 12ft RH White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft

.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

.306_2"-RH

Torsion Spring .306 x 2" x 12ft RH Red

Wire size: .306
Inside diameter: 2"
Length: 12 ft

.262_2"-RH

Torsion Spring .262 x 2" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 2"
Length: 12 ft

.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

Wire size: .207
Inside diameter: 2"
Length: 12 ft

11801

Doorlec Oilite Cam

Fits 5/8" shaft fine thread.
Grooved 5/8" - 24 x 3/8"
Requires 2 per cam shaft

17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

One block of 10 dip-switches for programming
Compatible with Doorlec 17307 receiver (DC-3000R)
Includes 12V battery (GP23A)

MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has P1 & P2 terminals
Up to 20 transmitters can be programmed

Instructions Manual

MJ00014

Micanan Brake Shoe and Drum Assembly for Gearhead

For Micanan gearhead models: GH GHC GSD
Assembly includes both right & left shoe and the drum

PL-SW-PHOTO

Lynx Silent Guard Photocell for Proline Openers

For models built from 2000+
Comes with photoeyes wire and bracket

RP-SW-LIMIT

Lynx Limit Switch for old model 455

Limit switch for old Lynx 455 with metal cover

CP-SW-AT

Lynx Single Limit Switch

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
3-buttons provides control for 3 Lynx operators
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Will work with Lynx residential operators built from 2000 and up.

.......more details

Compatibility chart

CP-SW-HOIST

Lynx Interlock Switch

VBELT_4L310

Lynx VBelt 4L 31" (4L310)

Fits the old Lynx 455 garage door opener

H14G06

Hinge #6 x 14 gauge ** To extent of Inventory

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#6 position
Use between sections 6 and 7
Same as part number 246

.......more details

H14GHALF

Half Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 1-5/8" wide with slotted holes

H14G02

Hinge #2 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#2 position
Use between sections 2 and 3
Same as part number 242

.......more details

I500

Erone 1100lbs Exterior Maglock Surface Mount Stainless *** To extent of Inventory Repl. by ESM500

1100 lbs holding force ( VS15R)
12/24Vdc – Current Draw: 550mA @ 12Vdc – 280mA @ 24Vdc
220mm (H) x 64mm (W) x 40mm(D) (8.6in x 2.5in x 1.5in)
Exterior applications & High-traffic areas
Includes monitoring capability
Stainless steel

.......more details

Installation manual Manuel d'installation Sell sheet Drawing

SEA433

Erone Tuned Antenna 433MHz

Increase reception and/or range
11.5ft (3.5m) coaxial cable (RG 58) included
L-Shaped bracket for wall-mounting

Wireless System Chart

SEL2641R433-C2P

Erone 2-Relay Stand Alone Power Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (230Vac)
Self-learning memorization
Relays with Pulse step or delayed operating mode.
Power requirements: 12/24Vac/dc
Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)

.......more details

Installation Manual Wireless System Chart

SESMT03

Erone Wall Support for Transmitter

Wall support for one S2TR2641 transmitter
Color: Grey
Velcro and mounting hardware included

Wireless System Chart

14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

Double Angle Rails for doors up to 14' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 16' 11"

VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

Used on MTH MTBH MSL models
Type B
Inside length 32 inches

VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

Used on MJ / MJH models
New belt type A replaces old 4L360. Part number VBELTA34

LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

Fits old medium-duty Manaras operators such as MDJ
SPDT - Cherry

Limit Switch Chart

LIMIT021

Manaras Single Limit Switch with Flat Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

Limit Switch Chart

LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

Replacement for LIMIT003
2x SPDT - Unimax
Same as Doorlec # 21702

Limit Switch Chart

LIMIT018

Manaras Double Limit Switch without Lever

Double limit switch (DPDT) - Cherry
The extra contact is used to control auxiliary equipment
Applies to all current operators

Limit Switch Chart

DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

Replaces DRUM004
Brake drum with edges for current braking systems (2000 - current)
Used on all Manaras operators except Gear Head models.
Use with BRAKEPART019 (old part BRAKEPART017)

RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card (factory installed)
16 transmitters maximun per receiver.
Use part # RADIO-KIT004 when adding or replacing on-site.
This is now standard equipment on all Circuit board operators

RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 1 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).
Replaced by RADIO-RE900A

.......more details

Programming Instructions - ECB Programming Instructions - CONT

RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

Open/Close/Stop remote for 32 doors.
By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
Comes with LED battery life indicator and 9V battery.
Can be wall or post mounted.
Must be used with 32 MCR series receivers.

Programming Instructions

7145.96

Whiting Bottom Seal For Coldsaver 96" long

Aluminum retainer sold separately

2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Roadside order part # 2704.162*180

7470.115

Whiting Side Seal for insulated doors 115" Long

Fits Coldsaver and Tempguard

2234.096

Whiting Coldsaver Bottom Panel 12-1/2" x Max 96" with seal and retainer ** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

2234.396

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with seal and retainer *** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

2235.096

Whiting Coldsaver Bottom Panel 14-1/2" x 96" with seal and retainer

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

2238.096

Whiting Coldsaver Intermediate Panel 14-1/2" x 96"

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

298601

Linear Wireless Multi-Code Keypad 310 MHz

Compatible with 310 MHz Stanley and Multi-Code receivers
4-digit access code
Backlit keys
Easy access to battery
Power: 9-volt battery
Codes: 1024 (set by dip switches)

.......more details

Installation Manual

1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

1336.3

Whiting Curbside Top Panel Closure Bracket for 8" radius track

831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

Three channels - three relay outputs
Oil-tight JIC ABS case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

1336.1

Whiting Curbside Top Panel Closure Bracket for 10" radius

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P