Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SPRING001

Manaras Cam Guide Plate Spring

BTN-8L5-GR

Devanco green replacement button for 8L5-OCS

green replacement button for 8L5-OCS

1004-2-14'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 14 ft***Actual Length 14'2"***

For door thickness 2"

12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

Fits model ETBHW/ETHW

DHJ501L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Right Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

BCSI-PM12

Pivin Drapeau Clutch Disk for BCSI Gate Operator ** Price by Quote Only

Phenolic Friction Disc

MT22-MON-GRY-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

DOC-6000

Atlas Door Operator Board

The Atlas board has been discontinued the Lynx 6000 is a direct replaceement

HW-SP-BL

Lynx Disconnect Spring

USVD-BD

EMX Board Only for Ultra Sonic Vehicle Detector

Replacement board only for USVD-4X

L-14-40-0-M

Cable Tie Standard 40 LB Black 14" Nylon 1000/pkg

Ultraviolet Resistant
Length: 14.50" / Width: .140" / Thickness: .058" / Diameter: 4.00"
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening

.......more details

CP-PU-DRV-78-8

Lynx Drive Pulley 7/8" x 8" 4L for Jackshaft Ops

CP-CLH-58

Lynx Clutch Hub 5/8"

SS-STRUT-10

Strut Stainless Steel 2-1/2" x 10ft 16-Ga

510.3920.05

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 5 Panels

Upgrade option

K1D8389-1CCU

LiftMaster Upgrade Kit with Eyes DC Pad Mount for UL325

Upgrade Kit for models CSW24V CSW24VH CSW24VDC CSL24V CSL24VH and CSL24VDC UL325 Approved Gate Operators; manufactured 2012 to 2015.
Complete kit includes: Main Control Board Expansion Board LiftMaster® Monitored Retro-Reflective Photoelectric Sensor Kit UL Upgrade label and Adapter Harness (used with CSW24V CSL24V and CSL24VH only)

SGP-321-1-230/1

Doorlec Gate Master 1 HP 230V 1 Phase with Heater and Lights in Cabinet

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater included

PRO-GH-10081U-L

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

1005-1-1/2-14'

Aluminum Bottom Retainer U-Shaped 14' Long

For door thickness 1-1/2"

BBSI-BCSI

Insulated Cabinet Option for BCSI Gate Op ** Price by Quote Only

PRO-APTC-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

PRO-APTC-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

MP00130

Micanan Up-Charge Track and #41 Chain for 14' h Door PRO-APTC

For 1/2 HP Micanan trolley operator PRO-APTC

203928

Decorative Locking L-Handle with 2 Keys

Black powder coated zinc with crinkle finish
90 degree handle rotation
Blind mount installation 3.62" stem
Includes 2 keys and shaft clip

CGH105L5-RH

LiftMaster Gearhead with Brake and Carwash Mod 1 HP 575V 3P L5 Right Hand ***No Longer Available

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MH00019

Micanan Precision Bearing 3/8" ID ** Replaced by MH00096

PRO-GH-10011U-L

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

MH00075

Micanan Shaft Collar 5/8"

PRO-GH-7553U-RH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

PRO-GH-7523U-R

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

.437-514-L-C

Cut-to-Length Torsion Spring .437 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.421-514-L-C

Cut-to-Length Torsion Spring .421 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.393-334-L-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.343-514-L-C

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

.295-258-L-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.273-134-R-C

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-2-L-C

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.250-134-L-C

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.250-134-R-C

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-2-L-C

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-2-L-C

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

218757

Torque Force Spring Failure Device 1" Shaft Left Hand Side DT0054

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

08-9098

LiftMaster Angle Mount Bracket Mounting Clip

PRO-HHD-5081U-R

Micanan 1/2HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1/2 HP208V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN) Specification Sheet

PRO-HB-7553U-RH

Micanan 3/4HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

RADIO-RE900A

Manaras 1-Channel 24V Dip-Switch Receiver with Commercial Antenna 313 MHz *Replaced by RADIO-RE901A

For Commercial/Industrial Garage Door Applications
Wall Mount
Fixed Code / DIP Switch Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz Radio Frequency
Controls One (1) Door

.......more details

PRO-HB-5081U-LH

Micanan 1/2HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-H-7543-U-LH

Micanan 3/4HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

SEA868

Erone Tuned Antenna 868MHz

Increase reception and/or range
11.5ft (3.5m) coaxial cable (RG 58) included
L-Shaped bracket for wall-mounting

Wireless System Chart

MK-00666

Micanan RF Junction Connector for Antenna

MK-00053

Micanan Overload Reset 3-Phase 8.0 - 11.5 Amps

MK-00523

Micanan Reversing Contactor ABB Size 1 24V w/Interlock

LC2K1210B7 mini contactor

MK-01155

Micanan Transformer 460V-24V-50VA

MK-00024

Micanan Single Limit Switch AT

MK-00931

Micanan Single Btn Mini Transmitter ** Discontinued

MK-00235

Micanan Flasher 120V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

MK-00300

Micanan Time Delay on Reverse 0.5 sec. 24/110V

In closing cycle door will stop for 0.5 seconds and reverse to fully open

MV-00018

Micanan Key Switch ON/OFF Nema 4 Surface Mount

MV-00240

Micanan Key Switch ON/OFF w/Best Core Cylinder Nema 4 Surface Mount

MV-00305

Micanan Wireless Pull Cord

MV-00172

Micanan LCE-3 Nema-1 Pushbutton Control Station

Flush mount

1005-1-3/8-12'

Aluminum Bottom Retainer U-Shaped 12' Long

For door thickness 1-3/8"

SD105L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Left Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

HAML-WIRING-HARNESS

GDI Wiring Harness Length Per Foot G3343

If over 10' is required

PRO-J-10021-U-LH

Micanan 1HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-10081-U-LH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-5043-U-LH

Micanan 1/2HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-5011-U-LH

Micanan 1/2HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-LJ-5011-U-RH

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Right Hand

On-Board receiver holds up to 20 transmitters

PRO-GT-15021-U

Micanan 1-1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-10023-U

Micanan 1HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5053-U

Micanan 1/2HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

.375-514-R

Cut-to-Length Torsion Spring .375 x 5 1/4" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

PRO-TB-5053-U

Micanan 1/2HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

PRO-TB-5081-U

Micanan 1/2HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7581-U

Micanan 3/4HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7511-U

Micanan 3/4HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

60-7243

Standard Caution Sign English 12" x 24"

88-8

Wheel Chock 88-8 Laminated Rubber Galv. Steel Sides

Fabric Reinforced Tire Rubber
Galvanized Steel Sides
Size: 8" wide x 8" long x 8" high

60-7248-MWC32

Wheel Chock Safety Pkg incl'd: chock w eye hook wall bracket 15' chain 3/8"x1 7/8" anchors (4) 3/16" quick link (2) & English caution sign

System Includes (1) MWC-32 Chock Bracket Tie Back Chain English Caution Sign and (4) Wall Bracket Anchors
Good stability over others in this class
Long Lasting 80 Durometer rubber
Size: 6-1/2" wide x 9-1/2" long x 8-1/2" high

CC-07

Wheel Chock CC-07 Cast Aluminum Alloy

Reversible Chock Design
One-Piece Cast Construction
Cast Aluminum Alloy
Size: 10" Base x 9" high x 6-1/4" wide

MP-00204

Micanan Splash Proof Covers PRO-H J HHD GH GHC (Fully Assembled)

drawing

203301

ELMON Safety Relay Rail 34-32 230VAC/24VAC/DC 1-Channel w/Testsignal

For DIN-rail mounting

MF00009

Micanan Hex Head Bolt 1/4" - 20 UNC x 2-1/4" Partial Thread

Used on PRO-HHD
1 required per operator

31D380

LiftMaster Sprocket Cover

Sprocket Cover Replacement Kit for use with various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers

E/1929/070

Automatic Systems Spare Arm 14'-9" (BL229)

Used on the BL229 gate op.

MK00594

Micanan Auxiliary Contact Block 100FA40

R

Molded Rubber Bumper Black 13" L x 12" W 4" Projection 4-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 4 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

LB1212-24

Laminated Bumper Standard Black 12" L x 24" W 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB420-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

Drawing

LVB424-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB612-18SF

Steel Faced Laminated Bumper Black 12" x 18" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-18

Laminated Bumper Standard Black 12" x 18" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-24

Laminated Bumper Standard Black 10" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details