Devanco Canada - Get The Right Garage Door Opener‎ and Parts

11-3602_SHAFT

LiftMaster Idler Shaft (1)

Fits SL595
Two are required per operator

CARX-20

EMX Accessory Access Card 5404-1

3.4" x 1.2" x 0.1" (ISO standard size)
Reinforced for long life
Mifare 26 bit Wiegand Format
Durable access card for use on the CR-2000 and PRX-320
Easy and convenient use - just swipe in front of sensor
Secure and can be disabled individually at any time

.......more details

MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming Instructions

SMDRG

Linear 1-Ch Gate Receiver MegaCode 318 MHz *** No Longer Available

High gain superheterodyne receiver
High RFI immunity
Supplied with F-connector whip antenna and mounting bracket
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

08-11013

LiftMaster Bevel Gear 3/4" ID

Fits the LiftMaster GH operator

STRUT-2-1/4-18'

Door Strut 2-1/4" Hemmed 18ft Long

Reinforcement bar 2-1/4"

SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

Actual length is approx. 9'-1"

SOLID_SHAFT_8FT

Solid Shaft 1" Keyed 8 ft Galvanized

actual length is approx. 8'-1"

SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

Actual length is approx. 7'-1"

G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

Heater used in BG type gate operators

Installation Manual

WKP250LM3

LiftMaster Wireless Keypad 250-Code ** Replaced by KPW250

Wireless access control keypad
250 code capacity - 4-digit codes
Wireless control of up to 4 doors or gates with additional GCUs
Post or surface mount standard
900MHz
Compatible with GCU and LiftMaster® 315MHz rolling code receivers

.......more details

Programming Instructions

BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

Zinc plated
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

Same as part number K75-50097

1013-1-1/4-24'

Rigid Vinyl Bottom Retainer L-Shaped 24' Long

For door thickness: 1-1/4"

1013-1-1/4-16'

Rigid Vinyl Bottom Retainer L-Shaped 16' Long

For door thickness: 1-1/4"

76-G0537

LiftMaster Alarm Assembly Kit for SL540/580

Installation Manual

1013-1-1/4-14'

Rigid Vinyl Bottom Retainer L-Shaped 14' Long

For door thickness: 1-1/4"

MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

Actual length: 179" (14' 11")

1086090001.S

Overhead Drive Gear for Overhead 556

White plastic gear only for Overhead model 556

41A7756

LiftMaster End Panel with Light Socket for 8557

STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

Rapid learn feature programs multiple transmitters in just seconds
Ideal for gated communities parking lotsand garages.
Works on a tri-band frequency

Programming Instructions Sell sheet

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

RS1029

Roller 2" Steel 9" stem- WL 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 9.5" Overall Length: 10.5"
Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)

41A7635

LiftMaster Transformer 100V

For model: 8550

MU00001

Micanan Swivel Pulley

For models PRO-H / HB

ME00003

Micanan Clutch Shaft Only for Pro-T/TB 3/4" x 11-3/4" No Kw 1" Thread

ME00057

Micanan Clutch Shaft Only for PRO-APT 3/4" x 12-3/4"

For model PRO-APT

MS00003

Micanan Carriage for PRO-APT / T

For model PRO-APT / T

50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts

82-PX10-28

LiftMaster Screw 10-32x28

3AG1

Miniature Fast Acting Glass Fuse 1 Amp 250V (5/pkg) - 766120

MX00147-NEW

Micanan Complete Clutch Kit for PRO-TB New Style Frame (MX00211)

After January 2006
8" Diameter pulley
Feb 2017 - new part number MX00211

BEARING005

Manaras Flange Bearing ID 5/8"

Flange bearing for 5/8" shaft

.225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.207-258-R

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-2-R

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

Operates on 12-24 volts AC or DC power
One channel
Whip antenna
3-foot antenna coax and bulkhead connector
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz or 310 MHz (jumper selectable)

.......more details

Programming Instructions

.273-134-R

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.218-134-R

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

CABLE_1/8-SS

Cable 1/8" 7x19 1000' Stainless Steel ** Price on request

10FT-RAIL-CHAIN

LiftMaster 10' chain drive rail 1710LMC - colour code: Red

#48 chain size
Price reflects cost if purchased with an opener

111010.0001

Overhead Door Serpentine VBelt 27"

Serpentine belt 27" long
Fits Genie GCL-T Trolley operator
Some Overhead drawbar models: JST RSX RMX

41A5021-9G-315

LiftMaster Circuit Board Assembly

Board: Security+ 315 MHz
Aeesmbly includes: circuit board and end panel
Also includes 1 Multi-Function wall ctrl panel - 2 wire
For ATS2113X model
For older ATS operators use replacement board 41A5021-1ATS

K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual

10FT-RAIL-BELT

LiftMaster 10' belt drive rail 2770BD - colour code: Blue

Price reflects cost if purchased with an opener

8FT-RAIL-BELT

LiftMaster 8' belt drive rail 2778BD - colour code: White

Price reflects cost if purchased with an opener

535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up tp 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

355LMC

LiftMaster Universal Radio Control Receiver 315 MHz **NLA

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up to 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the purple learn button (ERT format)
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

Programming Instructions Instructions de programmation

ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

External 8" coaxial antenna included
Security+ rolling code technology and/or Dip switch compatibility
12 VDC or 18-35 VAC/DC jumper selectable
Momentary or constant contact selectable
For replacement antenna use 41C3196
Accepts up to 31 remote control codes on Normal Security setting

.......more details

Programming Instructions Instructions de programmation

.393_6"-LH

Torsion Spring .393 x 6" x 12ft LH Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft

.363_6"-LH

Torsion Spring .363 x 6" x 12ft LH Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft

.331_6"-LH

Torsion Spring .331 x 6" x 12ft LH Red/White

Wire size: .331
Inside diameter: 6"
Length: 12 ft

.283_6"-LH

Torsion Spring .283 x 6" x 12ft LH White

Wire size: .283
Inside diameter: 6"
Length: 12 ft

.468_5-1/4"-LH

Torsion Spring .468 x 5-1/4" x 12ft LH Blue/Orange

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

.343_5-1/4"-LH

Torsion Spring .343 x 5-1/4" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

.437_3-3/4"-LH

Torsion Spring .437 x 3-3/4" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 3-3/4"
Length: 12 ft

.306_3-3/4"-LH

Torsion Spring .306 x 3-3/4" x 12ft LH Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft

.273_3-3/4"-LH

Torsion Spring .273 x 3-3/4" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft

.250_3-3/4"-LH

Torsion Spring .250 x 3-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft

.343_2-5/8"-LH

Torsion Spring .343 x 2-5/8" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft

.243_2-5/8"-LH

Torsion Spring .243 x 2-5/8" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft

.306_2"-LH

Torsion Spring .306 x 2" x 12ft LH Red

Wire size: .306
Inside diameter: 2"
Length: 12 ft

.250_2"-LH

Torsion Spring .250 x 2" x 12ft LH Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft

.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

.243_2"-LH

Torsion Spring .243 x 2" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 2"
Length: 12 ft

.273_1-3/4"-LH

Torsion Spring .273 x 1-3/4" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 1-3/4"
Length: 12 ft

.234_1-3/4"-LH

Torsion Spring .234 x 1-3/4" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 1-3/4"
Length: 12 ft

365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad
Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT

Programming Instructions Instructions de programmation

9V-1/PKG

Battery 9V 1-Pkg Alkaline Duracell Procell

AA

Battery AA Alkaline Duracell Procell Sold Individually

Sold Individually

893LM

LiftMaster 3-btn Transmitter Sec+ 2.0

Controls up to three garage door openers or gate operators or MyQ® enabled light accessories
Equipped with Security+2.0™ rolling code technology that virtually eliminates radio wave interference
3V lithium battery included
Compatible only with Security+2.0™ LiftMaster® garage door openers or gate operators
Equivalent to Chamberlain's 953ESTD

Programming Instructions Instructions de programmation

71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

Interior mount brake kit for operation with chain hoist
Includes solenoid

Instruction Manual

71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
Works on LiftMaster trolley garage door openers