Devanco Canada - Get The Right Garage Door Opener‎ and Parts

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MGHW-6113-0M00

Manaras MGH with Damp Area Mod (Mod081) 3/4 HP 120V Monitored Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
includes damp area modification
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Z9961

Maxum Operator Mounting Bracket

Compatible with MAXUM® Jackshaft operators
Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
Precise chain tension adjustments through the adjustment bolt
Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation

.......more details

Installation Manual

RXTA-200

Pulse Plug-In Receiver 200/300/400 Series Ops 315MHZ

315MHz rolling code plug-in wireless remote receiver for the Pulse 200 and 300 Series door operators.
Mates with the RXTA-100 & RXTA-200 transmitters and other universal/LM (purple) 315MHz transmitters

27121-600V

Doorlec Electric Motor 1-1/2 HP 600V 3PH DC223C

R2AES

Erone Radium 2-Button AES128 Encrypted Transmitter

Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes.
The code sent by the transmitter changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and remote.
Includes AES128 encryption
Compatible with RADIUM AES128 receivers
Heavy-duty construction

.......more details

SR-9004-WHITE

Elton Reverse Angle Clip-On Vinyl White 200ft Roll

Side Use – Clips onto Steel Jamb
Also for Residential Use

1-1785

RW Spring Bolt 514 x 2

Housing: Cast iron 5-1/2" H x 2-7/8" W
Bolt: Cast iron bevelled
Keeper: Surface mount
Chain: Zinc plated 36" long with ring Finish: Zinc plated

2200-936

Linear VBelt 25 4L Cogged

K15-50B18QGX

Output Sprocket for SL595 and SL595UL

��This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

K07-2706

LiftMaster Arm Hub

Also known as: 072706 07-2706 07-2706-1 G072706
For use with various LiftMaster® SW420 Series Swing Gate Operators

1-0418

RW Bow Handle Black Steel

Size: 191
Steel drilled for 1/2" dia bolt
Overall size: 13-1/2" h x 2" w. Handle projects 2-3/4" from doorface
Length of Grip: 8"
Depth: 1-7/8"

7-6100

RW Hanger 160B2 Sold per Unit

Hanger used on #333 track
For door thichness: 2-1/4" to 3-1/2"

7909212

FAAC Control Panel Main Circuit Board for FAAC 844

1-0243

RW Stay Roller 153 Galvanized

For use on #31 square track

10TD900INDHH1

BEA 1-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

GHX-311-3/4-LH

Doorlec Explosion Proof Gear Head 3/4 HP 120V 1PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

MB-01204

Micanan Electric Motor Only 1/2HP 575V 3PH

C-Flange motor fits: GT GH GHC GSD

2510-430

Linear Box Power Assemly SW/SL 230V Apex

The 2510-430 is a replacement Linear 208/230V Power Box Assembly
Input Voltage: 220/230/240 AC (60 Hz 1 Phase)

2200-027

Linear Chain #41 Master Link

K41-0387-000

LiftMaster Maxum Encoder Drive Sprocket & Hardware

BCSI-PM04

Pivin Drapeau Gear Reducer in Synthetic Oil *** Price by Quote Only

2807.200.280

Whiting .200 x 2-3/16 x 28" Curbside with Cones

2200-215

Linear Precision Bearing 5/8"

BEA-10LIGHT-A

BEA Modular LED Signal Light Audible Segment

Audible Alarm 2.6 KHz ±250 Hz oscillation frequency; maximum intensity 92 dB @ 39.6 in

MC271-2MON-RH-GY

Miller Edge MC271 2-Wire Monitored Right Hand Gray Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

OPH-6232-M-N1-LH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes Left Hand

Monitored version with Nema 1 photoeyes

CP-LEV-BRAKE

Lynx Brake Lever

WB-660

Skylink Wireless Wall Console w/ Auto Close for ATR Garage Openers

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

51-013611

Blue Giant Sensor Wand Flat 21 inch **Special Order

Price by Quote Only

CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

12118

Doorlec Commercial Aluminum Sliding Carriage

Works on Doorlec trolley operators

TS-1-168-GALV-KEY

Tube Shaft 1" x 168 (14'.0) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

CAPAC

LiftMaster Smart Access Hub

LiftMaster’s Smart Access Hub provides communities an affordable cloud-based option to monitor and control access points without needing to upgrade the entire system
Multiple-Entrance Control with myQ Community.
Flexible Connectivity Options - Ethernet Wi-Fi Cellular.
Universal Compatibility – Flexible connection options to control up to 4 access points (vehicle pedestrian amenity gates door strike or maglock).
Full Cloud-Based Management– For up to 50000 user and event history per unit.
Remote Programming and activity monitoring using myQ Community.

.......more details

RDRG63.3.1-1:1/2

Maximum Output Torque Generated Chain Hoist Rolling Door w/4B60HD-1:1/2K3/8-2S5/16SQ ** Spec Order

41B6228

LiftMaster Mounting Bracket RJO

Also known as: 041C0902 41A6228 41C0902 41B6228

GAREX-24X12-BLK

Garex Thermo Window Clear 24" x 12" Black Frame

An original Garex window
Fits 1-3/4" thick door R16

P-50H

End Plug for 1/2" ID Rubber Air Hose w/ Center Hole Qty 1

Sold per plug

IP-MDSF

CDVI Point of Entry Exterior Multi-Tenant Flush Mount Video Intercom System

Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
IP54 (recommended to be put under a canopy or covering)
Operating temperature: -10C to 50C
Stainless steel panel

.......more details

5001-16-SANDSTN

Residential Side & Top Weather-Strip 16' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

IP-SDS

CDVI Point of Entry Exterior Single Door Surface Mount Video Intercom System

Intercom system designed for single resident or commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on single home or small business.
Up to 32 monitors can be connected to this device.
Pushing the button will call all monitors inside the building.
170 degree fisheye camera single-button and audible anninciation.
IP54 (recommended to be put under a canopy or covering)

.......more details

S504AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 4ft

Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
Fast easy to install mounts vertically or horizontally
Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs

TDC41-10

LiftMaster Trolley Chain Pack #41 1200/2200LBS 10ft Door

Chain pack only
TDC41-10 is a #41 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 10' commercial doors

BCSI-PM19

Pivin Drapeau Keyway 1/4 x 1" *** Price by Quote Only

BCSI-PM02

Pivin Drapeau Bearing 1" FL205 *** Price by Quote Only

K21-16699

LiftMaster Transformer 120/240V 75VA 24VAC

For use with various LiftMaster® Speed Jack Commercial Door Operators

SHAKER-XL-R16

Garex Ready to Install Door Special Order

Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
Panel Width: Up to 24 feet (732 m)
Texture: Woodgrain
Offered in various choices of colours

SHAKER-R16

Garex Ready to Install Door Special Order

Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
Panel Width: Up to 24 feet (732 m)
Texture: Woodgrain
Offered in various choices of colours

CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

GALV-393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

99119671-PER-FOOT

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Amarr Residential Open Back Doors and Classica models

T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
For use with specific Torque Force chain hoists ie 200R (244687)
This chain will NOT work in the hoists that use the 30.7-19-5 chain
works with Micanan / Nice Commercial operators

GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

2110-700

Linear Idler Assy Large Gate

GALEOW

Erone 26-bit Wiegand Backlit Keypad

Compatible with ATRIUM CENTAUR and any 26-bit Wiegand system
Heavy-duty Zamak® cast alloy
Indoor/outdoor application
Blue backlit keypad
Weather resistant and vandal proof
PIN code: 4 to 8 digits

.......more details

Wireless System Chart

GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

K41-0254-000

LiftMaster Electric Motor IHSL24UL

Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
Compatible with the following models: IHSL24UL IHSL24ULMC

MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

Installed directly on the output shaft of the operator.
Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
Includes sprocket for #50 chain
Operator mounting side must be specified
A spreader bar cannot be used in conjunction with this modification
This modification applies to RGH ops

.......more details

OTBH-6533-M-N1

Manaras Trolley Operator 3/4 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

OSH-6434-M-N1-RH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

GHX-353-1.5HP-R

Doorlec Explosion Proof Gear Head 1-1/2 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

15-50B50QGH

Sprocket Kit 50B50 1.25" Bore x 1/4" Key w/ SS

CGH155L5-RH

LiftMaster Gearhead with Carwash Mod and Brake 1-1/2 HP 575V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MQ00002

Micanan Cotter Pin 1/8" x 2.5" Long

TDC1222-10

Liftmaster Comm. 10FT Trolley Angle set (10-5810-P x 2) and #41 chain pack (TDC41-10) ***Actual length 155"***

Double Angle Rails for doors up to 8'6" high
Includes #41 chain pack

TDC1222-8

Liftmaster Comm. 8FT Trolley Angle set (10-5808-P x 2) and #41 chain pack (TDC41-10) ***Actual length 131"***

Double Angle Rails for doors up to 8'6" high
Includes #41 chain pack

041-0347-000

LiftMaster Camera Replacement Kit

Compatible with models featuring a yellow learn button and Secure View™ Video Camera; manufactured after 2021 only.

SHAFT028

Manaras FDGHE Cam Shaft 5/8"-18

400-CBAC-STD-115V

FAAC Standard Gate Arm w/Positive Stops 40-1/2" L *** Price by Quote Only

400 CBAC Standard (Short) Arm with positive stops 40-1/2" tip-to-tip
Replacement arm for hydraulic Swing Gate Operator 10420112.5
This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
Dimensions: 40.5 x 3.35 x 3.35

041C0010

LiftMaster Chain Spreader 3/4hp

For use with various LiftMaster® and Chamberlain® 3/4 HP Chain Drive Garage Door Openers

GALV-295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

OGH-6534-M-N1-LH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

GALV-375-334-144-R

Torsion Spring .375 x 3-3/4" x 12ft RH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-343-334-144-R

Torsion Spring .343 x 3-3/4" x 12ft RH Galvanized Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-319-258-144-R

Torsion Spring .319 x 2-5/8" x 12ft RH Galvanized Blue/Green

Wire size: .319
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-306-334-144-L

Torsion Spring .306 x 3-3/4" x 12ft LH Galvanized Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-283-2-144-R

Torsion Spring .283 x 2" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-250-258-144-L

Torsion Spring .250 x 2-5/8" x 12ft LH Galvanized Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-243-334-144-L

Torsion Spring .243 x 3-3/4" x 12ft LH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

PUSH185

Manaras Contact Block NC XB5

MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

K41-0157-000

LiftMaster Cable Tension Monitor Right Side

For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
NOTE: Refer to K41-0156-000 for Left-Side Cable Tension Monitor