Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PED72

Pedestal Post 72" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with a 6 in. center radius giving a tight professional look

20-1100C-2P

LiftMaster Electric Motor 1HP 115/230V 1P

Replacement motor for SL595

02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

Die-cast metal enclosure
START may be used as OPEN with all LiftMaster operators.
May be used as OPEN and CLOSE on all operators with type B2 control wiring

Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

Same as MK-01179

1A3982

LiftMaster Operator Splash-Proof Cover

For models: MH H HCT GH
For wall mounted operators 31" L x 19" W x 18" D assembly required.

Installation manual

MI00007

Micanan Front Idler Assembly for PRO-APT/T

For model PRO-APT / T
3/4" x 5.79" LG

883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

Controls garage door operation and opener lights
Easy and fast programming
Compatible with Security+ 2.0 and MyQ remotes and accessories

Installation Manual Manuel d'Installation

.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

For do-it-yourself installation use part no. SF258

NX21

Allen Bradley 24V Reversing Contactor

Allen Bradley no. 104-C16KJH22-X6
Cat no. 100-C16*10

10FT-RAIL-CHAIN

LiftMaster 10' chain drive rail 1710LMC - colour code: Red

#48 chain size
Price reflects cost if purchased with an opener

.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

omplete disk brake assemble including 2-wire solenoid

Installation Manual

71-B240H

LiftMaster Interior Brake Kit with Cable 230-460V (Logic 3 4 and early 5 Disc and Pad Models)

Interior mount brake kit for operation with chain hoist

Instruction Manual

41B5669

LiftMaster Belt Clip and Link Kit

Used for splicing "New-Syle" belt

41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

Gear and sprocket assembly for belt drive units after 2002.
Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.

Installation Manual Manuel d'Installation

30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

19-50HL

Half (Offset) Link #50

Half link for #50 chain
ANSI Standard Carbon Steel

19-41HL

Half Link #41

Half link for #41 chain
ANSI Standard Carbon Steel

.363_5-1/4"-RH

Torsion Spring .363 x 5-1/4" x 12ft RH Green/White

Wire size: .363
Inside diameter: 5-1/4"
Length: 12 ft

.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft

.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft

.225_2-5/8"-RH

Torsion Spring .225 x 2-5/8" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 2-5/8"
Length: 12 ft

.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

.218_2"-RH

Torsion Spring .218 x 2" x 12ft RH Yellow/Orange

Wire size: .218
Inside diameter: 2"
Length: 12 ft

.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 1-3/4"
Length: 12 ft

MJ00003

Micanan Brake Drum ** To extent of inventory

Fits all Micanan commercial operators equipped with a solenoid brake
Available only in complete kit # MJ00013

OSH-6112-ECB

Manaras Opera-SH 1/2HP 120V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

Installation Manual Sell Sheet

OPH-6532-ECB

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

Installation Manual Sell Sheet

MOUNTSHAFT014

Manaras Clutch Shaft Kit for Opera-H (OPH)

Input / clutch shaft kit for Manaras Opera-H

Drawing

TRANSF088

Manaras Transformer 480-24V 40VA

Transformer 480V Primary 24V Secondary 40VA

LIMIT018

Manaras Double Limit Switch without Lever

Double limit switch (DPDT) - Cherry
The extra contact is used to control auxiliary equipment
Applies to all current operators

Limit Switch Chart

DISCONNECT001

Manaras Floor Level Disconnect Lever

RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 4 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).

Programming Instructions - ECB Programming Instructions - CONT

RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

Open/Close/Stop remote for 32 doors.
By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
Comes with LED battery life indicator and 9V battery.
Can be wall or post mounted.
Must be used with 32 MCR series receivers.

Programming Instructions

4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

For reverse angle rolling steel doors.
For use with Light Brush or Vinyl Insert.

4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

1006-2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 2"

1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-1/2"

1005-1-1/2-24'

Aluminum Bottom Retainer U-Shaped 24' Long

For door thickness 1-1/2"

1004-134-24'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 24 ft***Actual Length 24'4"****

For door thickness 1-3/4"
DIE # ES19244

1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-10FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 10' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

9001-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long

Grey rigid vinyl retianer with black flexible vinyl.
Reverse angle clip-on vinyl retainer.
Clips onto side of rolling steel door.
Clips overtop of 1/4" angle.

1104-16FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 16' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

1102-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

1001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

Double - Loop
32" long 48" stretch 170 lb load
Springs sold individually
Rated for 10000 cycles

Spec Sheet

32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

Double - Loop
32" long 48" stretch 80 lb load
Springs sold individually

25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

Double - Loop
25" long 42" stretch 270 lb load
Sold individually

Spec Sheet

25-42-170

Extension Spring 7' Door - 170 lbs Orange

Double - Loop
25" long 42" stretch 170 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White

27-20400

Truck Door Bracket for Torsion Assembly Roadside (LH) for Todco Roll-Up Doors

Steel construction
Zinc plated finish
Cross Reference: T #51036-2 W #4028 360000

26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

Measures 7" from end to end
Measures 5.5" from eyelet to eyelet

R5115

Bearing 1" Commercial with Flanged Retainer Football Style

1" Commercial bearing pressed in a Flanged Retainer Football Style
Type: Steel Bore: 1"
Inner Race Offest: 13/64"
Rated Load Cycles: 250 lb @ 10000 cycles (8')

R5999

Shaft Collar 1" with 1 Set Screw

Set Screw: 5/16 x 18

Z9004

Shaft Key Bent 3" x 1/4"

3" Bent Key
Zinc Plated Steel

SF175

Spring Fitting 1-3/4" Pair

Universal thread for use in either LH or RH wound springs.
A pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .2950".
Set screw installed: 3/8"-16 x 1" (2)
Fits 1" shaft
Winding bar hole 1/2"

.......more details

H11G02

Hinge #2 x 11 gauge

11 gauge # 2 hinge - 0.69 lbs
Bright zinc-plated
For use with 7/16" stem rollers

RN1124

Roller 2" Nylon 4" stem 11 ball White

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 150 Box weight: 49 lbs (2-4-11 White Nylon)

846CABLECL

Cable Clip - 14GA

Cable Adjustment Clip
3 hole pattern
Used to attach a cable to the S-hook on an extension spring system
Same as part number 423

HD3080

Step Lift Plate Curled

Step Plate/Lift Handle

BK312

Jamb bracket J-12 #12 12 gauge

Sold by the piece
Height 5.0" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot accepts 5/16" track bolts

25-01435

Truck Door Stainless Cables 110" 5/16 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Aluminum eye ends are used (only on 5/16" eye cables)
Cable size: 1/8"

4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

510.5377.00

Whiting Side Seal Option for Dry Freight Door

A extra option when ordering a Dry Freight door
When purchased alone use part number 5377.115

31D380

LiftMaster Sprocket Cover

Sprocket Cover Replacement Kit for use with various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers

MU22-2WIRE-LH-Y

Miller Edge MU22 2-Wire Left Hand Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

MD-00029

Roller Chain #41 Sold by the Foot

CF-101-24

Commercial Side & Top Weather-Strip 24' Long Aluminum / Vinyl

Same as Garaga CF101

1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

BK309

Jamb bracket J-09 #9 12 gauge

Sold by the piece
Height 4.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

CBC18

Thimble 1/8" - 100 per pkg

CORNELL-SLAT

Made to Order Pricing by Quote Only

41A7635

LiftMaster Transformer 100V

For model: 8550

K41-0380-000

LiftMaster Bridge Rectifier 700/1200

For Maxum ops

MOD130

Manaras Cogged V-Belt Upgrade

The standard v-belt is replaced by a cogged v-belt for added durability
Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
This is available only as an upgrade with the purchase of a commercial op.

BK027/PR

Commercial Bottom Bracket 1-3/8" 2"or 3" Inside Hook Up BB-4 Sold as a Pair *Includes (1) Right and (1) Left Bracket (2) Clevis Pins (2) Cotter Pins*

Includes 1 left and 1 right hand bracket
BB-4 SF

BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

For the temporary repair of a broken spring.
Wire size: .3175 - .3625

MG00014

Micanan Slotted Hex Nut 3/4"-24UNF

PRO-H/HB operator parts

OGH-6433-ECB

Manaras 3/4 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

2200-027

Linear Chain #41 Master Link

2200-367

Linear Chain Tension (Light) Spring

Used on various Linear Gate operators

K41-0387-000

LiftMaster Maxum Encoder Drive Sprocket & Hardware

TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

Chain pack only
TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.