Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
EL25KEY

LiftMaster Replacement Key for EL25 (041B0012)

  • One (1) key for the EL25
  • Same as 041B0012
RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

  • The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
  • Soft-Starts and Soft-Stops
  • Electrically activated drum-band type solenoid brake
  • Ceiling-mounted with 8.69" headroom clearance required below the tracks
  • Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
  • Tracks sold separately
  • .......more details
37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

  • For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)
5001-WG-12-MOAK

Residential Side & Top Weather-Strip 12' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

  • Yellow T-astragal
  • Width: 4-3/8"
.225-2-L-C

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
AUXCON011

Auxiliary Contact Allen Bradley 1 NO/1 NC Size 0-5

  • Allen Bradley #595-AB
MV-00133

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Pilot Light 24V

PDC300-CH-OPTION

Pulse300 Chain Hoist Option Only

  • Added option to a Pulse 300 operator
2376.182.27.950

Whiting Torsion assembly .182 wire size 27" spring length 95" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
K26-438

LiftMaster Artisan Timer

  • For use with various LiftMaster® Speed Jack Commercial Door Operators
  • Also known as: 26-438 AB117-00121 G26438 438USA
  • The DIP switches are used to set the time delay period between 1 and 1024 seconds.
  • The timer has an internal 1 second delay opening of the DIP switches adds their corresponding value to that internal delay.
  • The switches to the right are all opened for a total delay of 1023 seconds adding that to the internal 1 second provides the full 1024 seconds.
  • Any time delay from 1 to 1024 seconds can be achieved by opening the appropriate switches.
  • .......more details
KEYSWITCH039

Replacement key cylinder with two keys for station079

MYQ-C23ACXW

LiftMaster MYQ Garage Camera Magnetic Mount Motion detection & 2-way talk

  • The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
  • It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
  • myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
  • Video camera begins recording when motion is detected.
  • Easy setup with Bluetooth and magnetic mounting base.
  • Enables secure in-garage delivery for Amazon Prime packages
  • .......more details
B/CDJH-34-575-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 575V w/ ECB and Solenoid Brake Right Hand UL325

  • 3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
  • .......more details
CAPXLV2MC

LiftMaster Smart Video Intercom - L

  • Designed for High-Rise Buildings and Gated Communities
  • For 50 to 50000 units multi-family buildings and garden style communities.
  • Perfect for any entrance and beyond with 4 Wiegand Input 4 OSDP Readers and 8 Relay Output to control doors gates or any other relay-controlled electrical system.
  • 10” HD touchscreen display fits in a surface flush or pedestal mount.
  • Wi-Fi** or ethernet for easier installation and connection to Cloud. 3rd party cellular modem can be used as well.
  • Wireless link to LiftMaster gate operators to eliminate the need for digging trenches at the gate.
  • .......more details
51-012862

Blue Giant Sensor Wand Assembly **Special Order

  • Price by Quote Only
31376-2

Doorlec Sprocket 60B65 2" Bore

GALV-331-6-R

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
  • Galvanized
GALV-331-6-144-L

Torsion Spring .331 x 6" x 12ft LH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
SM102

Miller Edge Signature Module w/Junction Box for 10K (T2) Sensing Edges

  • SM-102: Converts a 10K resistive signal
  • Module: 1.8”H x 1.25”W x 0.8”D (46 x 32 x 20 mm)
  • Junction box: 1.5”H x 4”W x 2”D (38 x 102 x 51 mm)
  • Module: ABS plastic with epoxy
  • Junction box: Galvanized steel
  • Module: NEMA 4
  • .......more details
38252A.S

Genie Opto Wheel

  • The opt-wheel normally needs replaced if your garage door opener is short traveling in both directions (open and close) in the excess of 6 inches at a time then stopping.
  • Compatible with models: 1028 2028 1128 2128 1035 1055 2036 2035 2055 3035 3055 2033 3053 3155 7035 7055 7053 7135 7155
7-6134

RW Top Spring Bolt 514 x 3 1-1/4" sq x 9" Long

  • Bolt: Bevelled steel
  • Chain: Zinc plated 70" long with ring
  • Black Enamel finish
210-0202

Hormann/TNR Guide Bottom Lead In Hardware Kit LH/RH

L956W

LiftMaster Wireless Multi-Function Control Panel Security+ 3.0

  • Wireless control panel can be installed almost anywhere in the garage.
  • Includes a large push bar for garage door opener operation and a light control button.
  • Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
  • Compatible only with LiftMaster Security+ 3.0™ garage door openers.
  • No wiring required. Powered by CR2032 battery (included).
  • Warranty: 1 Year
  • .......more details
CTU48

Erone UHF ISO RFID Card U4GO Sold in Pack of 10

  • Compatible with A6U49 and A10U49
  • Pack of 10 cards
  • Customized printing available upon request
  • Available in dual technology (UHF + DESFire® EV2): CTU48EV2
  • Dimensions: 3.4 x 2.1 x 0.03'' (85.6 x 54 x 0.8 mm)
BGARM12

LiftMaster TECHNA Barrier Gate Arm 12 ft without LED

  • 3” Aluminum arm with integrated LED lights channel designed exclusively TECHNA barrier gate operators
  • Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
  • Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
  • The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle. Additionally it is compatible with the S50L a wireless edge safety device.
  • (Optional) LEDs are easily installed by sliding them into the arm's center channel and securing them with the included press-in clip
  • IP68 rated waterproof LED lights
  • .......more details
19045

Doorlec VBelt 4L360

HW-BRG-1

Lynx Bearing 1" x 2" OD

  • 2 in total on a MCJH
2806.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 34" Long
  • Roadside
  • For Curbside order part # 2807.177*340
63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

  • Compatible with the 746 and 844 motors
  • Replaces discontinued FAAC Part; 7580375
WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

  • Upgrade option
7131

Whiting Brush Side Seal Assembly; 7/8"

  • Quote required prior to sale to ensure correct fit
201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

  • Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H
028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

  • Price by Quote Only
C12

Felco C9 Cable Cutter 3/8" Capacity

  • The FELCO C12 a two-hand wire and cable cutter designed for precision.
  • Made with unbreakable forged aluminum handles and high-quality hardened steel blades
  • The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
  • Length: 19.69 in
  • Weight: 3.75 lb
  • Cutting diameter: 0.47 in
  • .......more details
461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

  • Used with #7-6095 rollers
  • Replacement for #75x14g
PB-001

Skylink Garage Door Wall Button

  • Install the Skylink Wall Button inside your garage.
  • Allows manual operation of your garage door opener.
  • Illuminated LED indication.
  • Easy to Install.
  • 30-foot Wire Included.
  • Mounting Hardware Included.
  • .......more details
ETBH-311-3/4HP

Doorlec 3/4 HP 115V Trolley Door Opener with solenoid brake

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
H11G03-SS

Hinge #3 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G01-SS

Hinge #1 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
HAWK2

EMX Microwave Motion Sensor Wide Coverage 5410-2 *** DISC

  • Advanced K-band planar microwave technology
  • Easy installation and adjustment
  • Wall or ceiling installation
  • Directional sensitivity: toward away or both
  • High coverage area resolution
  • Installation height up to 20 feet (6 meters)
  • .......more details
IP-MONB

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System in Black

  • Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in black.
  • IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
  • Also available in white: IP-MON
  • SIP Server
  • Operating temperature: -10C to 55C
  • Call recording and built-in memory
  • .......more details
IP-MDS

CDVI Point of Entry Exterior Multi-Tenant Surface Mount Video Intercom System

  • Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
  • Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
  • Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
  • IP54 (recommended to be put under a canopy or covering)
  • Operating temperature: -10C to 50C
  • Stainless steel panel
  • .......more details
TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

  • Chain pack only
  • TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors
BCSI-PM20

Pivin Drapeau Sprocket 50B12 *** Price by Quote Only

10-BR2900

BEA 2 Relay Logic Module + 900MHZ Wireless Technology

  • 2 relay logic module ideal for applications requiring sequencing of electric locking devices and automatic door activation.
  • Day/Night mode allows users to designate "secure" or "unsecure" access for controlled entry points.
  • Push plates with wireless transmitters can be programmed to operate during specific time periods.
  • Programmable transmitters per receiver: 75 (unlimited for universal timer)
  • Input: DRY contact
  • Temperature rating: -22 to 158F
  • .......more details
D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

  • Power Supply: 12-24 Volts AC/DC
  • Current Consumption: < 9 mA
  • Operating Temp: -40°F to 180°F
  • Surge Protection: Zener Diode /MOV
  • Output Relays (2): 1Amp 30 VDC
  • Loop Input: Transformer isolation lightning and transient protection (1)
  • .......more details
29201

Doorlec Transformer 460V pr 120V sec 35VA

  • 460V prImary 120V secondary 35VA
GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

  • Laser-based sensor system for automatic swing doors.
  • Time-of-flight technology used to eliminate the limitations of infrared-based devices.
  • Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
  • Provides asjustable pattern depth.
  • Min/max door width: 20"-48" from leading edge of sensor LED
  • Mounting height: 75"-98" from finished floor to sensor LED
  • .......more details
BL229-EX1929-D45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Right Hand

10SSTI

BEA Active Infrared Presence Sensor

  • Active infrared sensor for industrial environments.
  • Applications: automatic industrial doors gates and automation.
  • Uses triangulation to detect presence of an object eliminating false detections caused by varying ground conditions.
  • Can be mounted on stationary or moving objects.
  • Can be used individually or daisy-chained with up to 8 other modules.
  • Can be used on narrow and wide doors.
  • .......more details
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
  • .......more details
E/1907/012

BLG76 Backup Spring Assembly

22019

Doorlec Push Button Contact Block N/O

PRO-SD-10081-U-RH

Micanan 1 HP 208V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

  • Designed for use on commercial / industrial sliding doors or sliding fire doors
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema 1
  • #41 roller chain & sprockets on all internal drives
  • Heavy duty 5L v-belt
  • Solenoid brake standard
  • .......more details
E/1929/023

Automatic Systems Balance Spring Ass'y 5.5 MM BL229

  • Used on the BL229 gate op.
E/1929/201

Automatic Systems Limit Switch Assembly

  • Used on the BL229 gate op.
OGH-6536-M-N1-RH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
OTBH-6113-AM05

Manaras Trolley Operator 3/4 HP 120V Monitored Board w/Eyes Apt. Model

  • The OTBH model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
  • Includes monitored N4X eyes (PHOTO 061)
  • .......more details
Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

  • Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
  • Also known as: 94-50287 K94-50287
19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

S50E

LiftMaster Small Profile Ends Kit 10 Sets of 2

  • Fast easy to install and cost effective system no glue is required
  • One end for output wire other end with resistor for monitoring
  • Compatible with S50 Small Profile Edge
  • Includes: (10) sets of 2
K177A0112

LiftMaster Trolley Spring

  • Also known as: 177A112 62274 177A0112 062274 132C2180 177A78
GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
2200-540

Linear Replacement Key for BG Snap Lock

BPFL205

Bearing Flangette Retainer Only PFL-205 2 pieces 2-Hole

  • Does not include bearing
  • Steel Zinc plated finish
DC2000

LiftMaster Controller DC2000****Discontinued

  • DC2000 Controller with battery backup
  • BackUp Commercial Vehicular Gate Operator
  • 12VDC - 30 Amps Max.
  • 125 lbs. Max. pull @ CSW-200 Units
  • 105 lbs. Max. pull @ SL-3000 Units
70225.000

Truck Door Todco 2" White Nylon Quiet Roller ** Price by Quote Only

GEAR001

Manaras Bevel Gear GH/MGH 5/8" 20 Tooth

CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

  • Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
  • Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
  • Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
  • Dimensions: 6.15” x 4.13” x 4.74”
2200-968-UPS

Linear Sprocket 40B22 1" Oxided UPS

NINJA-001-BLACK

Rodent Ninja Garage Door Corner Guard Set

  • Blocks pests from entry
  • Fills in holes and gaps along garage door frame
  • Keeps insects mice and unwanted guests outdoors
  • Kit includes: (1) Right and (1) Left handed Garage Door Corner Guard (6) Self-tapping Screws
  • Made in the USA
1104-18FT-CHI-CRM

Residential Side & Top PVC Weather-Strip with cap 18' Long - CHI Cream (C-C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • CHI compaible colour
  • Full case quantity only (12).
GALV-375-6-144-RH

Torsion Spring .375 x 6" x 12ft RH Galvanized Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
GLASS-ONLY

Elton Sealed Glass Only Clear Made to Order Quote Only

  • Thermal replacement glass only
FAAC-SPEC-ORDER

FAAC Special Order Gate Product Price by Quote Only

  • Ordered to customer's specs
41832R.S

Genie Service Head 6070H/B 6170H/B

  • FOR REPLACEMENT OF JACKSHAFT OPERATOR SHAFT RELEASE OR MOTOR ASSEMBLIES
  • Head Service Kit for 6070H/6070HB and 6170H/6170HB
  • Special Order Price by Quote Only
  • This kit includes the complete motor but does not include the circuit boards transformer or cover for the 6070/6170 unit.
OSH-6212-M-N1-RH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
XLSOLARCONTUL

LiftMaster Solar XL Control Box Battery/Harness Not Included

  • Includes LMRRUL Retro-Reflective Monitored Photoeye
  • Compatible with LA400 LA412 LA500
  • Does NOT include the battery or harness. A12330SGPLK sold separately
65-5501-16

LiftMaster Bi-Parting Mod Kit 16ft (Includes 19-5124 Chain #41 for 24ft Door and 10-5820-P Track for 20ft Door ***Actual length 275"***

  • Includes: 65-5501 Bi-Parting 19-5124 Chain #41 for 24ft Door 10-5820-P Track for 20ft Door
CRBH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • .......more details
2022691

FAAC Control Board for Model 741

CGH753L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod 3/4 HP 208/230/460V 3P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
  • .......more details
BUSHING025

Manaras Bronze Bushing 5/8 x 3/4 x 5/16

PCBA-PD3.3

Dyna Hoist/Pulse Replacement Drive Board for DC500-100

MYQ-SGC2WLM

LiftMaster Smart Garage Camera ***To Extent of Inventory

  • The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
  • It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
  • myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
  • Video camera begins recording when motion is detected.
  • Easy setup with Bluetooth and magnetic mounting base.
  • Enables secure in-garage delivery for Amazon Prime packages
  • .......more details
PHOTO-060

Manaras Non-Monitored Photoelectric Cells N4/12 & IP67 Retro-Reflective 39' Range incl 3" Reflector

  • Retro-Reflective photo cell
DAK-2ULT-MVP

EMX Drive Thru Alert Kit Chime/Strobe Pre-Wired Enclosure *** Price by Quote Only

  • Kit includes: 2x EMX ULT-MVP Vehicle Detectors with LD-11 Connectors
  • 2x EMX PR-46-100 Induction Loops
  • 1x SLM500B LED Beacon and Sounder with SLMBW-012-024GY Wall Mount Bracke
  • 1x 120VAC to 24 VDC Power Supply
  • 1x NEMA 1 Junction Box (wall mounting hardware not provided)
10MS31U-B

BEA Magic Switch Touchless Stainless Steel Single Gang

  • BEA’s MAGIC SWITCH® provides a highly accessible and germ-free door activation without physical contact.
  • Reduce touchpoints in fast-paced environments that depend on sanitation like healthcare retail industrial and commercial settings.
  • Using microwave technology BEA’s MS31 produces a detection field with a reliable and consistent transmission in interior and exterior applications.
  • Capable of detecting a moving hand cart or wheelchair.
  • Operating temperature: -20 to 55C
  • IP54
  • .......more details
GDI-HB330

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft Non Monitored

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
  • .......more details
GDI-HB310

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft UL-325 Photo Eyes Extra

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
  • .......more details
GDI-LG930

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • .......more details
MSJ-6113-M-N1-RH

Manaras MSJ 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 35 cycles per day > 150 cycles per day
  • .......more details
FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

  • The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
  • The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
  • Control Board: model 780D
OTBH-6112-M-N1

Manaras Trolley Operator 1/2HP 120V 1Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
  • Includes PHOTO-070
  • .......more details